• Transactions on Electrical and Electronic Materials
• /
• 제3권4호
• /
• pp.36-40
• /
• 2002

The polar anchoring strength and surface ordering in a NLC,4-n-pentyl-4'-cyanobiphenyl (5CB), on a rubbed polyimide (PI) surface containing trifluoromethyl moiety were studied. The large extrapolation length de of 5CB for washing process of water was measured at RS=114 mm. The polar anchoring energy of 5CB on the rubbed PI surface is decreased by the washing process. Also, the polar anchoring energy of 5CB increases with the rubbing strength on the PI surface. The surface ordering of 5CB for all washing processes is smaller than the non-washing process; it is attributed to the washing process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.949-952
• /
• 2002

The mechanisms of pretilt angle generation for a nematic liquid crystal (NLC) with negative dielectric anisotropy on the blended polyimide (PI) surface containing trifluoromethyl moiety was studied. High LC pretilt angle on the blended polymer surface with F3 was measured and the pretilt angle increased with rubbing strength. However, the low LC pretilt angle on the blended polymer surface with F1 and F2 was measured. The high LC pretilt angle generated is attributable to trifluoromethyl moiety in backbone structure on the blended PI surface. Therefore, the high pretilt angle of NLC can be achieved by using the blended polymer surface.

• 한국전기전자재료학회논문지
• /
• 제15권11호
• /
• pp.981-984
• /
• 2002

The mechanisms of pretilt angle generation for a nematic liquid crystal (NLC) with negative dielectric anisotropy on the blended polyimide (PI) surface containing trifluoromethyl moiety were studied. High LC pretilt angle on the blended polymer surface with F3 was measured and the pretilt angle increased with rubbing strength. However, the low LC pretilt angle on the blended polymer surface with F1 and F2 was measured. The high LC pretilt angle generated is attributable to trifluoromethyl moiety in backbone structure on the blended PI surface. Therefore, the high pretilt angle of NLC can be achieved by using the blended polymer surface.

• 농약과학회지
• /
• 제4권3호
• /
• pp.15-18
• /
• 2000

제초제 후보물질로서 N-{2,4-dichloro-5-(N-methylpyrazol-3-yl)phenyl}imides 7과 N-{2,4-dichloro-5-(N-methy-lpyrazol-5-yl))Phenyl}imides 8의 유도체들을 합성하여 제초활성을 온실조건에서 조사하였다. 처리량 1 kg/ha에서 pyrazole moiety에 carboxylate나 carboxamide 치환기가 있는 화합물들 (7c-7l) 제초활성을 나타내지 않았으나, pyrazole moiety에 trifluoromethyl기가 있는 화합물들은 처리량 63-250 g/ha에서 논피, 물달개비, 너도방동산이등의 잡초들에 대해 제초활성을 보였고 벼에 대해서는 안전한 결과를 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1078-1081
• /
• 2003

The polar anchoring strength and surface ordering in a NLC, 4-n-pentyl-4'-cyanobiphenyl (5CB), on a rubbed polyimide (PI) surface containing trifluoromethyl moiety were studied. The large extrapolation length de of 5CB for washing process of water was measured at RS=114 mm. The polar anchoring energy of 5CB on the rubbed PI surface is decreased by the washing process. Also, the polar anchoring energy of 5CB increases with the rubbing strength on the PI surface. The surface ordering of 5CB for all washing processes is smaller than the non-washing process; it is attributed to the washing process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.133-135
• /
• 2003

The washing effects on pretilt angle generation in a nematic liquid crystal (NLC), 4-n-pentyl-4’-cyanobiphenyl (5CB) on a rubbed polyimide (PI) surface with trifluoromethyl moiety have been successfully studied. The pretilt angle of 5CB is increased by the washing process on the rubbed PI surface. The surface tension on the rubbed PI surface increases with the rubbing strength RS and then saturated above RS=150 mm. The pretilt angle of 5CB for all washing processes on the rubbed PI surface decreases with the surface tension. We have found that the pretilt angle of 5CB on the rubbed PI surface may be attributed van der walls (VDW) dispersion interaction between the LC molecules and the polymer surfaces having trifluoromethyl moieties.

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3760-3764
• /
• 2010

We screened 10,000 heterocyclic small molecules and identified a novel hit core skeleton of 3-(8-chloro-6-(trifluoromethyl) imidazo[1,2-a]pyridine-2-yl)phenyl acetate derivatives. It has been selected as a potential glucagon-like peptide 1 receptor (GLP-1R) activator and demonstrated its effects in increasing GLP-1 secretion, and thereby increasing the glucose responsiveness in both in vitro and pharmacology analyses. Further studies are currently underway to optimize the potency and selectivity of 3-(8-chloro-6-(trifluoromethyl)imidazo[1,2-a]pyridine-2-yl)phenyl acetate derivatives (hit compounds 2 and 8), and address their in vivo efficacy and therapeutic potential. These molecules may serve as useful evidence showing that compounds with a 3-(8-chloro-6-(trifluoromethyl)imidazo[1,2-a]pyridine-2-yl)phenyl acetate moiety are selective GLP-1R agonists, and have potential as anti-diabetic treatment agents.

• Rapid Communication in Photoscience
• /
• 제1권2호
• /
• pp.27-29
• /
• 2012

Noble diamine monomers containing thiophene moiety were prepared, such as 2,5'''-diamino-2, 2':5', 2'':5'', 2'''-quaterthiophene (4TDA) and 2, 5'''''-diamino-3'', 4'''-dihexyl-2,2':5', 2'':5'', 2''':5''', 2'''':5'''', 2'''''-sexithiophene (6TDA). Then, these monomers were utilized to prepare polyimides with 3,6-diphenylpromellitic dianhydride (DPPMDA), 3,6-di(4'-trifluoro-methylphenyl) pyromellitic dianhydride (6FPMDA) or 3,6-di(3',5'-bis (trifluoromethyl)phenyl) pyromellitic dianhydride (12FPMDA) via a conventional two-step process. The polyimides were characterized by FT-IR, TGA and DSC, and then subjected CV, UV-vis and PL measurements. The polyimides containing thiophene moiety exhibited high glass transition temperatures ($280{\sim}310^{\circ}C$) and excellent thermal stability (> $420^{\circ}C$) in air as well as green emission (535~586 nm).

• Transactions on Electrical and Electronic Materials
• /
• 제4권1호
• /
• pp.21-23
• /
• 2003

The washing effects on pretilt angle generation in a nematic liquid crystal (NLC), 4-n-pentyl-4'-cyanobiphenyl (5CB) on a rubbed polyimide (PI) surface with trifluoromethyl moiety have been successfully studied. The pretilt angle of 5CB is increased by the washing process on the rubbed PI surface. The surface tension on the rubbed PI surface increases with the rubbing strength RS and then saturated above RS: 150 mm. The pretilt angle of 5CB for all washing processes on the rubbed PI surface decreases with the surface tension. We have found that the pretilt angle of 5CB on the rubbed PI surface may be attributed van der walls (VDW) dispersion interaction between the LC molecules and the polymer surfaces having trifluoromethyl moieties.

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2311-2316
• /
• 2013

A series of new diarylamide and diarylurea derivatives possessing pyrimidinylaminobenzene scaffold was synthesized. Their in vitro antiproliferative activities were tested against A375P human melanoma cell line. Among them, compounds 1a-c, k and 2b-d, f, g, j, l showed superior potencies against A375P human melanoma cell line to Sorafenib. In particular, compound 2f possessing 3-fluoro-5-trifluoromethyl moiety exhibited the highest potency with $IC_{50}$ value in nanomolar scale.