• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.415-417
• /
• 2003

we analyzed the electromagnetic behavior of a superconducting fault current limiter (SFCL) under the quench state using FEM. The analysis model used in this work is 5.5 KVA meander-line type SFCLs. Meshes of 3,650 triangular elements were used in the analysis of this SFCL. Analysis results showed that the distribution of current density was concentrated to inner curved line in meander-line type-SFCL and the maximum current density was 14.61 $A/m^2$ and also the maximum Joule heat was 2,030 $W/m^2$ in this region. We think that the new and the modified structure must be considered for an uniform distribution of the electromagnetic field.

• Structural Engineering and Mechanics
• /
• 제23권5호
• /
• pp.543-562
• /
• 2006

Base isolation technology has been accepted as a feasible and attractive way in improving seismic resistance of structures. The seismic design of new seismically isolated structures is mainly governed by the Uniform Building Code (UBC-97) published by the International Conference of Building Officials. In the UBC code, the distribution formula of the inertial (or lateral) forces leads to an inverted triangular shape in the vertical direction. It has been found to be too conservative for most isolated structures through experimental, computational and real earthquake examinations. In this paper, four simple and reasonable design formulae, based on the first mode of the base-isolated structures, for the lateral force distribution on isolated structures have been validated by a multiple-bay three-story base-isolated steel structure tested on the shaking table. Moreover, to obtain more accurate results for base-isolated structures in which higher mode contributions are more likely expected during earthquakes, another four inertial force distribution formulae are also proposed to include higher mode effects. Besides the experimental verification through shaking table tests, the vertical distributions of peak accelerations computed by the proposed design formulae are in good agreement with the recorded floor accelerations of the USC University Hospital during the Northridge earthquake.

• 한국전자파학회논문지
• /
• 제15권10호
• /
• pp.961-968
• /
• 2004

본 논문에서는 임의 형상을 가지는 삼차원 유전체의 전자파 산란을 해석하기 위하여 모멘트법을 이용한 뮬러적분방정식의 새로운 해법을 제안한다. 매질이 균일한 유전체 표면을 평면 삼각형 패치로 모델링 하여, RWG (Rao, Wilton, Glisson)함수를 등가 전기 및 자기 전류밀도의 전개함수로 사용한다. 그리고 RWG 함수와 그 직교함수를 조합한 시험함수를 적용한다. 유전체구에 대하여 제안된 방법으로 계산된 수치 결과를 보이고 다른 공식에 의한 결과와도 비교한다.

• 한국전자파학회논문지
• /
• 제13권1호
• /
• pp.19-25
• /
• 2002

본 논문에서는 전력증폭기를 슬롯이 적재된 삼각형 마이크로스트립 패치 안테나와 동일 평면의 기판에 집적화하여 전력증폭기 출력단의 제 3 고조파 튜닝을 안테나가 수행함으로써 전력효율을 향상시키는 효과와, 실제 집적화에 따른 송.수신 신호의 분리 문제를 위해 이중공진, 이중급전을 이용한 능동 집적 안테나의 특성을 고찰하였다. 제 3 고조파에서 방사를 억제 구조로서 안테나에 슬롯을 적재시킨 능동 집적 안테나를 설계, 제작하여 측정한 결과, B급 전력증폭기와 안테나를 각각 제작하여 결합한 형태보다 약 5 %의 전력효율 개선 효과를 얻을 수 있었다. 또한, 송.수신 분리에 대하여서도 IMT-2000주파수 대역의 수신 port에서 송신 주파수의 신호를 -35 dB 이하로 격리시키는 특성을 나타냄을 관찰할 수 있었다.

• 한국전자파학회논문지
• /
• 제11권8호
• /
• pp.1337-1345
• /
• 2000

마이크로스트립 안테나는 경량, 평면 구조와 대량 생산 등의 장점에 의해 최근 각광을 받고 있다. 특히 식각 기술에 의한 제조 등의 장점으로 인해 배열 안테나로서 강점을 나타내며 집중적인 연구의 대상이 되고 있다. 반면 몇 가지 단점에 의해 설계 및 제작 상에 어려움을 겪게 되는데 표면 전파(surface wave)에 의한 음영각(scanblindness) 발생 및 이에 의한 조향각(scan angle)의 제한 등을 들 수 있다. 이 논문에서는 이러한 문제점을 해결 할 수 있는 cavity-backed 마이크로스트립 방사소자를 사용하여 위상 배열 안테나 구조에서 강점을 나타내게 되는 삼각형 구조 배열 안테나를 해석하는 알고리즘을 설명하고 이를 통해 이러한 구조가 실제 성능의 개선을 가져 올 수 있음을 보이고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2519-2521
• /
• 2003

In this paper, we propose Self-Organizing Fuzzy Polynomial Neural Networks(SOFPNN) architecture for optimal model identification and discuss a comprehensive design methodology supporting its development. It is shown that this network exhibits a dynamic structure as the number of its layers as well as the number of nodes in each layer of the SOFPNN are not predetermined (as this is the case in a popular topology of a multilayer perceptron). As the form of the conclusion part of the rules, especially the regression polynomial uses several types of high-order polynomials such as linear, quadratic, and modified quadratic. As the premise part of the rules, both triangular and Gaussian-like membership function are studied and the number of the premise input variables used in the rules depends on that of the inputs of its node in each layer. We introduce two kinds of SOFPNN architectures, that is, the basic and modified one with both the generic and the advanced type. The superiority and effectiveness of the proposed SOFPNN architecture is demonstrated through nonlinear function numerical example.

• 한국정밀공학회지
• /
• 제17권8호
• /
• pp.172-179
• /
• 2000

In this paper a technology for the fabrication of the oblique structure using the LIGA process will be presented. The fabricated microstructure is a tetrahedral 3- facet mirror. The mirror has an equilateral triangular base of hundreds ${\mu}m$ length mirror-like three side-facets inclined to the base at 45$^{\circ}$ and knife edges. Two regular triangles of 45$^{\circ}$ and tan-12. After development the shaded part of the PMMA the tetrahedral mirror remains, The completed mirror shows excellent aspects of mirror-like facets and knife-edges. By controlling the gap between the mask and the substrate the size of mirror easily can be changed. This mirror would be used as a laser beam splitter for the feedback control of the HDD slider.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.533-548
• /
• 2012

Dynamic analysis of concrete gravity dam-reservoir systems is an important topic in the study of fluid-structure interaction problems. It is well-known that the rigorous approach for solving this problem relies heavily on employing a two-dimensional semi-infinite fluid element. The hyper-element is formulated in frequency domain and its application in this field has led to many especial purpose programs which were demanding from programming point of view. In this study, a technique is proposed for dynamic analysis of dam-reservoir systems in the context of pure finite element programming which is referred to as the wavenumber approach. In this technique, the wavenumber condition is imposed on the truncation boundary or the upstream face of the near-field water domain. The method is initially described. Subsequently, the response of an idealized triangular dam-reservoir system is obtained by this approach, and the results are compared against the exact response. Based on this investigation, it is concluded that this approach can be envisaged as a great substitute for the rigorous type of analysis.

• Computers and Concrete
• /
• 제11권5호
• /
• pp.475-492
• /
• 2013

Since the beginning of the 90 s, depending on the growth of the industrial sector in Turkey, factory constructions have been increased. The cost of precast concrete buildings is lower than the steel ones for this reason the precast structural systems are used more. Precast concrete structural elements are mostly as strong as not to have damage in the earthquake but weakness of connections between elements causes unexpected damages of structure during earthquake. When looking at the previous researches, it can be seen that there is a lack of studies about socket type base connections although there were many experimental and analytical studies about the connections of precast structural elements. The aim of this study is to investigate the stress transfer mechanism between column and the socket base wall with finite element method. For the finite element analysis ANSYS software was used. A finite element model was created which is the simulation of experimental research executed by Canha et al. (2009) under vertical and horizontal forces. Results of experimental research and finite element analysis were compared to create a successful simulation of experimental program. After determining the acceptable parameters, models of socket bases were created. Model dimensions were chosen according to square section column sizes 400, 450, 500, 550 and 600 mm which were mostly used in industrial buildings. As a result of this study, stress distribution at center section of the socket base models were observed and it is found that stress distribution affects triangular at the half of socket bottom and top.

• Current Optics and Photonics
• /
• 제5권5호
• /
• pp.500-505
• /
• 2021

We demonstrated a wide-fan-angle flat-top irradiance pattern with a very narrow linewidth by using an aspheric lens and a long-pitch reflective diffraction grating. First, we numerically designed a diffraction-based linear beam homogenizer. The structure of the Al diffraction grating with an isosceles triangular shape was optimized with 0.1-mm pitch, 35.5° slope angle, and 0.02-mm radius of the rounding top. According to the numerical results, the linear uniformity of the irradiance was more sensitive to the working distance than to the shape of the Al grating. The designed Al grating reflector was fabricated by using a conventional mold injection and an Al coating process. A uniform linear irradiance of 405-nm laser diode with a 100-mm flat-top length and 0.176-mm linewidth was experimentally demonstrated at 140-mm working distance. We believe that our proposed linear beam homogenizer can be used in various potential applications at a precise inspection system such as three-dimensional morphology scanner with line lasers.