• 한국공간구조학회논문집
• /
• 제21권4호
• /
• pp.23-30
• /
• 2021

In this paper, a twisted shape structure with an elevation form favorable to the resistance of vibration caused by wind loads is selected from among the forms of high-rise buildings. The analytical model is a square, triangular, and hexagonal plane with a plane rotation angle of one degree from 0 to 3 degrees per each story. As a result of the analysis, as the twist angle increased, story drift ratio is increased. Responses with different eccentricity rates were shown by analytical models. Therefore planar shapes designed symmetrically to the horizontal axis of X and Y are considered advantageous for eccentricity and torsion deformation. In the case of the bending moment of the column, the response was amplified in the column supporting the base floor, the roof floor, the floor in which the cross-section of the vertical member changes, and the floor having the same number of nodes as the base floor. Finally, the axial force response of the column is determined to be absolutely affected by the gravity load compared to the lateral load.

• Structural Engineering and Mechanics
• /
• 제87권4호
• /
• pp.347-361
• /
• 2023

This research aims to assess the behavior of reinforced concrete (RC) residential buildings when moment-resisting frames (MRFs) are used as the lateral resisting system. This investigation was conducted using MIDAS Gen v.19.0. Buildings with various plan footprints (Square, Rectangular, Circular, Triangular, and Plus-Shaped), and different heights (15 m, 30 m, 45 m, and 60 m) are investigated. The defined load cases, the equivalent static lateral load pattern, and the response spectrum function were defined as stated by the American Standard (ASCE 7-16), the 1997 Uniform Building Code (UBC97), the Egyptian Code for Loads (ECP-201), and the European Standard (EC8). Extensive comparisons of the results obtained by the different codes (including the story displacement, the story drift, and the base shear) were undertaken; to assess the response of moment-resisting multi-story framed buildings under lateral loads. The results revealed that, for all study cases under consideration, both ECP-201 and EC8 gave smaller base shear, displacement, and drift by one third to one fourth, around one fourth, around one fifth, respectively for both the ELF and RSA methods if compared to ASCE 7-16 and UBC97.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.212-215
• /
• 2006

The Beautiful rest room is simple how to think. We need to understand that excretion is important as much as eating. When we didn't have foods, eating was important in itself no matter what our lives environments. But now we want to eat in more dignified and more cultural place. Most of restaurants spend money on adjusting place for the consumes' desire. It is same way about rest room, it is time to change our rest room to place of rest and speculation over the place which we fix our natural urge. We can fix our natural urge, take a rest, and get creative ideas in more convenient, more healthy and more comfortable. It is time for us to change out thought about rest room; it is not dirty and stink place, but civilized living place like developed country. Also, we need new concept to take a triangular position about rest room is one of structure over just decorations. This research suggest new public rest room without precedent based on instance analysis about rest room inside and outside the country.

• 전자공학회논문지D
• /
• 제35D권9호
• /
• pp.87-92
• /
• 1998

확장된 새로운 층 방법을 이용하여 사다리꼴과 삼각형 형태의 회절격자 구조를 가지는 5층의 DFB 구조 소자의 TM 모드의 결합계수를 계산하였다. TM 모드의 unperturbed 필드 분포를 쉽게 계산하기 위하여 회절격자 영역의 비유전상수의 역수를 종축과 횡축 양 방향으로 평균값을 취하여 새로이 설정하는 층의 비유전상수의 역수가 되도록 설정하였다. 확장된 새로운 층 방법이 TM 모드의 결합계수 계산에도 유용하게 사용될 수 있음을 회절격자 영역의 등분할 층수를 6층까지 늘려가며 self-consistent하게 검증하였다.

• 산업기술연구
• /
• 제17권
• /
• pp.43-50
• /
• 1997

Local administration is closely related with intention of residents. Especially, a plan item is closely related with life of residents. Therefore, it has to be logical and objective solution for opinion convergence. Decision of opinion has to be in a triangular position standard and stand in a trio of criteria in standard. But, opinion convergence of residents very difficult. Recently, the technique of GIS presents method for oponion convergence with logical and objective and scientifically solution. And, this study present method for decision of intention to a complex element with GRID and NETWORK techniques of GIS. This study present optimun site of constructure with the GIS technique in consideration of a side face of transportation, technical, social economy and environments.

• Environmental Engineering Research
• /
• 제23권1호
• /
• pp.107-113
• /
• 2018

Air quality and pollution have recently become a major concern; vehicle emissions significantly pollute the air, especially in large and crowded cities. There are various factors that affect vehicle emissions; this research aims to find the most influential factors affecting $CO_2$ and $NO_x$ emissions using Adaptive Neural Fuzzy Inference System (ANFIS) as well as a systematic approach. The modified ANFIS (MANFIS) was developed to enhance modelling and Root Mean Square Error was used to evaluate the model performance. The results show that percentages of $CO_2$ from trucks represent the best input combination to model. While for $NO_x$ modelling, the best pair combination is the vehicle delay and percentage of heavy trucks. However, the final MANFIS structure involves two inputs, three membership functions and nine rules. For $CO_2$ modelling the triangular membership function is the best, while for $NO_x$ the membership function is two-sided Gaussian.

• 한국지능시스템학회논문지
• /
• 제8권6호
• /
• pp.106-118
• /
• 1998

The study concerns a design procedure of rule-based systems. The proposed rule-based fuzzy modeling implements system structure and parameter identification in the efficient from of "IF..., THEN..." statements, and exploits the theory of system optimization and fuzzy implication rules. The method for rule-based fuzzy modeling concerns the from of the conclusion part of the the rules that can be constant. Both triangular and Gaussian-like membership function are studied. The optimization hinges on an autotuning algorithm that covers as a modified constrained optimization method known as a complex method. The study introduces a weighted performance index (objective function) that helps achieve a sound balance between the quality of results produced for the training and testing set. This methodology sheds light on the role and impact of different parameters of the model on its performance. The study is illustrated with the aid of two representative numerical examples.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.865-870
• /
• 2004

This paper describes the generation of chordal surface for various shell structures, such as automobile bodies, plastic injection mold components and shell metal parts. After one-layered tetrahedral mesh is generated by an advancing front algorithm, the chordal surface is generated by cutting a tetrahedral element. It is generated one or two elements at a tetrahedral element and the chordal surface is composed with triangular or quadrilateral elements. This algorithm has been tested on several models with rib structure.

• Journal of Power Electronics
• /
• 제1권1호
• /
• pp.36-47
• /
• 2001

The carrier-based space vector pulse width modulation(SVPWM), which is considered as highly simple and efficient PWM technology, can be also used in multilevel inverters. The method was originally designed for the two-level inverter and developed to the diode clamped multilevel inverter structure. however it may be noted that it also cause bad switch utilization in cascaded multilevel inverter. This paper introduces an improved carrier-based SVPWM scheme, which is fully suitable for cascaded multilevel inverter topologies because it can achieve the optimized switch utilization through the redistribution of the triangular carrier waves considering leg voltage redundancies while having the advantages of the conventional carrier-based SVPWM. Using simulation and experimental results, the superior performance of new PWM method is shown.

• 대한산업공학회지
• /
• 제24권2호
• /
• pp.185-197
• /
• 1998

Engineering design involves the specification of many variables that define a product, how it is made, and how it behaves. Before some variables can be determined, other variables must first be known or assumed. This fact implies a precedence order of the variables, and of the tasks of determining these variable consequently. Moreover, design of complex systems may involve a large number of design activities. In this paper, the activity-activity incidence matrix is considered as a representation of design activity analysis which mainly focuses on the precedence constraint. In order to analyze the activity-activity incidence matrix, a heuristic algorithm is proposed, which transforms an activity-activity, parameter-formula, and parameter-parameter incidence matrix into a lower triangular form. The analysis of the structured matrices can not only significantly reduce the overall project complexity by reorganizing few critical tasks in practice, but also aims at obtaining shorter times considering the solution structure by exploring concurrency.