• Journal of the Korea Concrete Institute
• /
• v.16 no.6 s.84
• /
• pp.841-850
• /
• 2004

The modeling of uplift pressure within dam, on the foundation on which it was constructed, and on the interface between the dam and foundation is a critical aspect in the analysis of concrete gravity dams, i.e. crack stability in concrete dam can correctly be predicted when uplift pressures are accurately modelled. Current models consider a uniform uplift distribution, but recent experimental results show that it varies along the crack faces and the procedures for modeling uplift pressures are well established for the traditional hand-calculation methods, but this is not the case for finite element (FE) analysis. In large structures, such as dams, because of smaller size of the fracture process zone with respect to the structure size, limited errors should occur under the assumptions of linear elastic fracture mechanics (LEFM). In this paper, the fracture behaviour of concrete gravity dams mainly subjected to uplift Pressure at the crack face was studied. Triangular type, trapezoidal type and parabolic type distribution of the uplift pressure including uniform type were considered in case of evaluating stress intensity factor by surface integral method. The effects of body forces, overtopping pressures are also considered and a parametric study of gravity dams under the assumption of LEFM is performed.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.93-116
• /
• 2005

SPT-Uphole tomography method was introducedand verified in this paper. In SPT-Uphole method, SPT (Standard Penetration Test) which is common in site investigation, was used as a source and several surface geophones in line were used as receivers. Shear wave velocity (Vs) distribution map which has triangular shape around the boring point can be obtained by tomography inversion. The factors for obtaining reliable result of SPT-Uphole tomography are exact travel time information and accurate inversion method. To establish of the SPT-Uphole tomography procedure, the most reliable method for obtaining exact travel time information and verification of tomography inversion method were studied by using theoretical travel time information and finite element method (FEM) analysis. finally, SPT-Uphole tomography method was performed at the weathered soil site in Kimje. By comparing with several boring data including SPT-N value, feasibility of this method was verified in the field.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.702-708
• /
• 2017

The heat generation rate in a telecommunications cabinet keeps increasing due to the increased usage of mobile devices. Insufficient removal of the heat increases the cabinet temperature, which results in the malfunction of the electronic devices. In this study, tests were conducted on aluminum and plastic heat exchangers for cooling a telecommunications cabinet, and the results were compared with theoretical predictions. The aluminum heat exchanger comprised counter flow parallel channels with 4.5-mm pitch, and the plastic heat exchangers comprised cross or cross-counter flow triangular channels with 2.0-mm pitch. The volume of the cross flow heat exchanger was the same as that of the aluminum heat exchanger, and the volume of the cross-counter heat exchanger was 33% larger than that of the aluminum heat exchanger. The results show that the heat transfer rate is the highest for the cross-counter heat exchanger and lowest for the aluminum one. The temperature efficiency of the cross-counter heat exchanger was 56% higher than that of the aluminum one and 20% higher than that of the cross flow heat exchanger. The pressure drop of the cross-counter heat exchanger was approximately the same as that of the aluminum one. The heat exchange efficiency was the highest for the cross-counter heat exchanger and lowest for the cross flow heat exchanger. The theoretical analysis somewhat overestimated or underestimated the data.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.2
• /
• pp.105-115
• /
• 2010

Recently, High-rise building are irregular-shaped to be city landmarks and function as vertical cities to enable the efficient use of land. 3T (Twisted, Tilted & Tapered) designs are being suggested for irregular buildings and studies to develop new structural system have been actively made to satisfy slender shape ratio. In diagrid system, not only gravity load but also lateral load is delivered based on the triangular shape of diagrid, so most of columns are eliminated. Because shearing force is delivered by the axial behavior (tensile/compressive) of diagrid to minimize shearing deformation, the system is more applicable to irregular buildings than existing system where shearing force is delivered by the columns. In this study, the process of selecting connection details and the structural safety of the selected details are verified using the finite element analysis with focus given to the construction overview of the Cyclone Tower. However, the relersed methods of stress concentration are suggested and the performance of stress concentration relieves that it's suggested for the appropriate cap plate thickness and extended length.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.3
• /
• pp.97-106
• /
• 1989

This paper is on the modeling of two-dimensional groundwater flow, which is the first step of the development of Dynamic System Model for groundwater flow and pollutant transport in subsurface porous media. The particular features of the model are its versatility and flexibility to deal with as many real-world problems as possible. Points as well as distributed sources/sinks are included to represent recharges/pumping and rainfall infiltrations. All sources/sinks can be transient or steady state. Prescribed hydraulic head on the Dirichlet boundaries and fluxes on Neumann or Cauchy boundaries can be time-dependent or constant. Sources/sinks strength over each element and node, hydraulic head at each Dirichlet boundary node and flux at each boundary segment can vary independently of each other. Either completely confined or completely unconfined aquifers, or partially confined and partially unconfined aquifers can be dealt with effectively. Discretization of a compound region with very irregular curved boundaries is made easy by including both quadrilateral and triangular elements in the formulation. Large-field problems can be solved efficiently by including a pointwise iterative solution strategy as an optional alternative to the direct elimination solution methed for the matrix equation approximating the partial differential equation of groundwater flow. The model also includes transient flow through confining leaky aquifers lying above and/or below the aquifer of interest. The model is verified against three simple cases to which analytical solutions are available. The groundwater flow model shall be combined with the model of pollutant transport in subsurface porous media. Then the combined model, with the applications of the Eigenvalue technique and the Dynamic system theory, shall be improved to the Dynamic System Model which can simulate the real groundwater flow and the pollutant transport accurately and effectively for the analyses and predictions.

• International Journal of Highway Engineering
• /
• v.8 no.3 s.29
• /
• pp.63-76
• /
• 2006

For a private toll road project, deciding optimal toll is an important element of economic analysis for the project and a challengeable work. In this study, the optimal toll of a private toll bridge, Geoga Bridge which connects Geoje Island of Gyeongnam Province and Gaduk Island of Busan was estimated using Stated Preference (SP) data. The SP data were collected by interviewing the passenger car drivers travelling on the National Road 14. They are latent users of the bridge. A fuzzy approximate reasoning model to estimate the optimal toll was built using the SP data. For the input variable of the model, the saved travel time and toll level were employed and the diversion rate to the bridge was employed for the output variable. The diversion rates for each toll level and saved travel time were estimated and the toll level which had maximized the toll revenue was decided as optimal toll. The optimal toll was tested by comparing with the average pay rate of passenger car drivers. Since the optimal toll for passenger cars at one hour saving, the 6,250 won is about 50 % of the average pay rate of passenger car divers, the toll was evaluated not to be high. The technique employed in this study may be used for the estimation of the optimal tolls for other kinds of vehicles.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.6
• /
• pp.467-478
• /
• 2019

This paper describes the development and measurement results of a wide-band planar active phase array antenna system for an electronic warfare jamming transmitter. The system is designed as an $8{\times}8$ triangular lattice array using a $45^{\circ}$ slant wide-band antenna. The 64-element transmission channel is composed of a wide-band gallium nitride(GaN) solid state power amplifier and a gallium arsenide(GaAs) multi-function core chip(MFC). Each GaAs MFC includes a true-time delay circuit to avoid a wide-band beam squint, a digital attenuator, and a GaAs drive amplifier to electronically steer the transmitted beam over a ${\pm}45^{\circ}$ azimuth angle and ${\pm}25^{\circ}$ elevation angle scan. Measurement of the transmitted beam pattern is conducted using a near-field measurement facility. The EIRP of the designed system, which is 9.8 dB more than the target EIRP performance(P), and the ${\pm}45^{\circ}$ azimuth and ${\pm}25^{\circ}$ elevation beam steering fulfill the desired specifications.

• The Korean Journal of Zoology
• /
• v.15 no.3
• /
• pp.111-131
• /
• 1972

Fine structures of retina of an ommatidium in dragonfly, having eyes of closed rhabdom type, were studied under light and electron microscopes. The ommatidia consisted of eight retinular cells distributed in a circular pattern and the retinular layer in turn can be divided into three sublayers according to the number of cells in the retina. Each retinular cell has different starting points in the retina and the length of retinular cells is varied greatly; the length of one distal retinular cell shows one half of that of others. In the middle layer, three proximal retinular cells interconnect the adjacent two rhabdoms which are triangular in the appearence of the cross section which in turn consisted of tubular, parallel and lamellated microvilli. The rhabdom is formed by three rhabdomeres, each of which is separated by $120^{\circ}$ between them, but they can be distinguished into two parts according to electron density. Around the outer part of microvilli composing rhabdom, electron density was much less than the inner part of the structure. The microvilli of the inner part appear to be connected to the cytoplasm of retinular cells. Rough endoplsmic reticulum with enlarged cisternae runs through the vacuoles in the outer part of distal retinular cells. Abundant mitochondria concentrated in the vicinity of rhabdom are found at the central part of the retinular cells, while in the area of immediate vicinity of the rhabdom, prominent vacuoles are observed. Above the rhabdom of an ommtidium stands a crystalline cone which is consisted of four cone cells arranged radially along the axis. The crystalline cone is surrounded by cells containing pigment granules. The outermost photoreceptor element of an ommatidium is corneal lens.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3C
• /
• pp.143-155
• /
• 2006

SPT-Uphole tomography method was introduced for the evaluation of near subsurface shear wave velocity (Vs) distribution map. In SPT-Uphole method, SPT (Standard Penetration Test) which is common in geotechnical site investigation was used as a source and several surface geophones in line were used as receivers. Vs distribution map which is the triangular shape around the boring point can be developed by tomography inversion. To obtain the exact travel time information of shear wave component, a procedure using the magnitude summation of vertical and horizontal components was used based on the evaluation of particle motion at the surface. It was verified that proposed method could give reliable Vs distribution map through the numerical study using the FEM (Finite Element Method) model. Finally, SPT-Uphole tomography method was performed at the weathered soil site where several boring data with SPT-N values are available, and the feasibility of proposed method was verified in the field.

• Korea Journal of Hospital Management
• /
• v.12 no.1
• /
• pp.1-30
• /
• 2007

The study carried out a survey with employees of hospitals located in Daejeon, Chungnam, and Chungbuk from Sep. 12 to Sep. 30, 2005 in order to derive primary elements that affect the improvement of hospital's competitiveness. The study investigated and analyzed the employees' recognition on the change of competitive environment caused by the change of medical environment. The study also analyzed the elements that affect the hospital's competitiveness and the competitive strategies of the hospitals. The conclusion of this study can be summarized as follows. 1. Summary 1) Most of the employees responded that there is a rival in the competitive environment and the competitive is intense. Especially when the employees are married, live in urban areas, have an education level of university graduate or are managers, they tend to think the competitive is very intense. Also, they said that the competitive is based upon the quality of medical service. They mentioned the element that has the biggest effect on the competitiveness is the element of medical consumer and they recognized that the medical services in university and general hospitals have more competitiveness than the one-department hospitals. 2) It was investigated that the medical technique service has the most effect on the hospital's competitiveness. Also, the external service of medical techniques also has a large effect on the hospital's competitiveness. 3) When they were asked for the factors that affect the patients' decision on selecting a hospital, most of them responded "capability and technique of the medical staffs." Also, they said that "sufficient explanation from doctors" and "special center and clinic" are the factors that have big effects on the patients' decision. 4) In the SWOT analysis, most of them responded that the strength is the hospital's characteristics and the weakness is insufficient and obsolete equipment. They said the opportunity is the demands for professional medical service and the risk is the intense competitive among the hospitals. 5) In the SWOT strategy, they emphasized the strategy that uses the opportunity and the strength and the strategy that uses the opportunity while overcoming the weakness. 6) As for the basic competition strategy, most of them thought of the strategy of professionalizing the medical service most importantly. Next, they focused on the strategy of distinct service and the strategy of lower prime cost. 2. Conclusion 1) Because service competition between hospitals is happening seriously, need competitiveness security through right awareness transfer and satisfaction upgrade about medical consumer. 2) For medical technique service upgrade that equip Hospital's competitiveness but affects most, must solidify the countermeasure because professionalizing the medical service and newest medical technique induction should be achieved first, and compose task force for the external service of medical techniques improvement. 3) To improve SWOT of hospital, opportunity and the strength strategy choice that rescue hospital's characteristics heightening professionalizing the medical service level is fancied. 4) As for the basic competition strategy, will have to try in phase triangular position of hospital which is trusted medical level upgrade and excellent manpower security and finance independence through upgrade. The study was only done with hospitals in Daejeon, Chungnam and Chungbuk. Also, it is a study from the side of suppliers of medical service so there are limitations. However, the significance of the study is to present the basic data for improvement of hospital's competitiveness by examining the importance of medical techniques and external service of medical techniques that are the main effects on the improvement of hospital's competitiveness.