• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.23-24
• /
• 2014

Currently, cement and concrete industries have been contributing to the CO₂ emission worldwide. Because of that, the efforts to minimize CO₂ have been the subject of many researches. This study focus on the use of GGBFS and fly ash in mortar specimens as a patial replacement of cement. Because of the limitation of the initial compressive strength, the newly efforts to enhance the strength through CO₂ Curing was adapted. To accelerate the reaction with CO₂, MgO was replaced by percentage from 0 to 100%. Results showed that compressive strength values at 7 days with CO₂ curing done on specimens was higher than that with no CO₂ curing. Similar trend was observed at 14 days too. It is therefore appeared that CO₂ curing has an obvious effect on compressive strength development of mortar specimens.

• 융합신호처리학회논문지
• /
• 제6권1호
• /
• pp.33-38
• /
• 2005

데이터를 디지털화하거나 전송하는 과정에서 여러 가지 원인에 의해 열화가 발생하고 있으며, 이러한 열화의 주된 원인은 잡음이다. 따라서 잡음에 의해 훼손된 신호를 복원하기 위하여 웨이브렛을 이용한 방법들에 대한 연구가 활발히 진행되고 있다. 그리고 AWGN 환경에서 잡음을 제거하기 위한 가장 일반적인 연구 동향은 threshold에 기초한 방법들이다. 그러나 이러한 방법은 잡음에 대한 통계적인 특징만을 고려함에 따라 복원된 신호는 여전히 많은 잡음들을 포함한다. 따라서 본 논문에서는 웨이브렛 상세계수의 누적을 통한 새로운 신호 복원 방법을 제시하여, 신호의 edge 성분에 대한 복원과 잡음 제거 성능을 향상시켰다. 그리고 개선 효과의 판단 기준으로 SNR을 사용하였으며, 객관적인 판단을 위해 기존의 방법들과 비교하였다.

• 대한원격탐사학회지
• /
• 제34권6_3호
• /
• pp.1319-1327
• /
• 2018

우리나라는 여름철에 강수량이 집중되고, 지하수 유출량이 크기 때문에 가뭄에 취약한 지형을 가지고 있다. 이러한 가뭄을 판단하기 위해서 정량화된 가뭄지수가 사용되고 있다. 이 중에서 주로 강수량을 분석한 가뭄지수가 많이 사용되고 있으며, 최근에는 인공위성 영상을 활용하여 가뭄을 모니터링하는 연구가 진행되었다. 이에 이 연구에서는 소양강 상류지역의 가뭄 모니터링을 위하여 KOMPSAT-2/3 영상을 이용하여 수계면적을 산출하고 가뭄지수와의 비교 분석을 실시하였다. 그 결과 인공위성영상에서 산출된 수계면적 변화의 경향성과 가뭄지수와의 경향성이 비슷하게 나타남을 확인하였다. 추후 이 연구는 가뭄을 판단하기 위한 근거로 활용될 수 있을 것이다.

• 한국가구학회지
• /
• 제20권4호
• /
• pp.339-357
• /
• 2009

Probability based design(PBD) method is independent of construction materials and uses real material properties unlike allowable stress design(ASD) that depends on small clear specimen property, also give quantitative safety and endurance lifetime of a certain material. Moreover, almost advanced country accepted PBD method instead of ASD method. So it is urgent to convert the current ASD method into the PBD method. However, there are wholly lacking of domestic researches related to current issue, and to solve several points in ASD method and to take advantage of PBD method, the conversion from the ASD method into the PBD method is a worldwide trend. Other domestic construction codes, such as steel or concrete constructions, accept the PBD method as well. Accordingly, to introduce PBD method into wood structural design, general theory, and preliminary data and methods were reviewed. With keeping this in mind, some important contents were reviewed, sorted some points for wood structural design that have distinctions against the other construction materials. Furthermore, the history of PBD method, and statistical data and theories for the PBD method, and preliminary data of resistance and load that are two random variables for the PBD method, and finally the difference between limit state design(LSD) and load and resistance factor design(LRFD) that were two superpowers in the PBD method.

• 한국항공운항학회지
• /
• 제23권2호
• /
• pp.21-31
• /
• 2015

The world air transport industry has grown steadily with quantitative expansion. The volume of air transport in the world is skyrocketing with the open-sky trend. Air passengers from or to South Korea has shown 5% of annual growth for the last couple of decades which caused South Korea now ranking in 18th in the World for air transport market size. Quantitative expansion of Air transport affects in policy making of air transport operators, such as airports, airlines or authorities, directly and indirectly. Especially, Aviation Safety field should be supported by policy regime with the growth of air transport volume, assured resources for continuous monitoring is standing out as a vital factor. This study is to estimate social costs caused by aviation accidents and investment costs for aviation safety by airports, airlines and authorities as operators. Estimated investment costs for aviation safety verified by comparing and analysing them. Precedent studies were reviewed to refer research methodology to calculate aviation accident costs and safety costs of operators. Safety costs of operators was calculated with literature researches and interview surveys among professionals of each operators in rational range.

• KIEAE Journal
• /
• 제15권2호
• /
• pp.95-101
• /
• 2015

Purpose: A photovoltaic/thermal system is a solar collector combining photovoltaic module with a solar thermal collector, which produces electricity and heat at the same time. PVT system removes heat from PV module through air or liquid that would help to raise the efficiency of the PV systems performance. Many innovative systems and products have been put forward and their quality evaluated by academics and professionals. However, even though various of PVT system were developed and several systems were applied to practical use, there have been few researches for the performance analysis using the dynamic simulation. Method: In this study, the review of recent research and development trend for PVT systems were conducted. Furthermore, in order to develop the optimum design method, the performance analysis for PVT system was conducted by a dynamic simulation. Result: In the results, it was found that the performance of PVT system significantly depends on the ambient temperature and solar radiation. Moreover, in the weather condition of Seoul, average efficiency of electricity and heat in heating season were 13.79 and 41.85%, and they in cooling season were 14.39% and 26.18%, respectively.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.136-137
• /
• 2018

The domestic seismic retrofit guide was primally enacted in 1988, then the mandatory target have been consistently. As a result, the rate of earthquake-resistant is achieved 58.3% in public facilities. On the other hand, the rate of earthquake-resistant is low as 24.8% in education facilities. As education facilities damaged from Gyeong-ju, Po-hang earthquake occurred in South-Korea and the rate of earthquake-resistant is low, the seismic retrofit of existing education facilities got to be ordinary people's interest. Therefore, domestic researchers have been developed seismic retrofit methods which can apply to existing educational facilities, It is expected to become more active in the future. However, it is insufficient to consideration that how far domestic technology has been developed. Therefore, the objective of this study is to measure the level of domestic research through comparative analysis between domestic and foreign researches that seismic retrofit methods which can apply to existing educational facilities.

• 대한한방소아과학회지
• /
• 제35권4호
• /
• pp.75-81
• /
• 2021

Objectives The purpose of this study is understanding the trend of clinical researches on the correlation between precocious puberty and sleep. Methods 18 papers were searched by using keywords 'Precious publicity' and 'Sleep' in Pubmed, China National Knowledge Infrastructure, and those were analyzed for this study. Results Children aged 6 to 18 were participated in longitudinal studies and questionnaire surveys. Hormone levels and EEG were also measured in those children. This study had placed emphasis on the sleeping time and sleep quality, and sex hormones secretion during sleep and changes in the hormone secretion related to the sleep cycles. Historically, oriental medicine studies have demonstrated that there were correlations between precocious puberty and sleep. There are studies from China showed the importance of lifestyle management in preventing and treating precocious puberty, especially with light exposure during sleep. Conclusions Sleep is closely correlated with precocious puberty and it is an important factor to be considered in the prevention and treatment of precocious puberty.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.60-65
• /
• 2007

According to the customers' demands, cellular phones are getting thinner and thinner in spite that their functions are getting more complex and flexible. Based on this trend, we are willing to propose new design of ultra slim cellular phone with multi-hinges which can provide thinner feature and wider active area than the current merchandised one. To make it come true, smaller and stronger mechanical parts would be necessary and more researches would be carried out in the near future. Moreover, the new frame of ultra slim cellular phone has the problem in heat propagation due to its thin feature and multi function. In this paper, slim heat-spreader would be proposed as a candidate to resolve the problem of heat transfer in the new cellular phone. To investigate the applicability of heat-spreader to cellular phones, prototypes were fabricated and verified.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.319-322
• /
• 1995

As a trend toward multi-product batch processes is increasing in Chemical Process Industry (CPI), multi-product batch scheduling has been actively studied. But the optimal production scheduling problems for multi-product batch processes are known as NP-complete. Recently Ku and Karimi [5] have studied Simulated Annealing(SA) and Jung et al.[6] have developed Modified Simulated Annealing (MSA) method which was composed of two stage search algorithms for scheduling of batch processes with UIS and NIS. Jung et al.[9] also have studied the Common Intermediate Storage(CIS) policy which have accepted as a high efficient intermediate storage policy. It can be also applied to pipeless mobile intermediate storage pacilities. In spite of these above researches, there have been no contribution of scheduling of CIS policy for chemical batch processes. In this paper, we have developed another MSA for scheduling chemical batch processes with searching the suitable control parameters for CIS policy and have tested the this algorithm with randomly generated various scheduling problems. From these tests, MSA is outperformed to general SA for CIS batch process system.