• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.74-75
• /
• 2008

TIGBT has some merits which are lower on-state voltage drop and smaller cell pitch, but also has a defect which is relatively lower breakdown voltage in comparison with planar IGBT. This lower breakdown voltage is due to the electric field which is concentrated on beneath the vertical gate. Therefore in this paper, new trench IGBT structure is proposed to improve breakdown voltage In the new proposed structure, a narrow oxide beneath the trench gate edge where the electric field is concentrated is extended into rectangular shape to decrease the electric field. As a result, breakdown voltage is improved to 23%.

• 한국전기전자재료학회논문지
• /
• 제16권10호
• /
• pp.853-858
• /
• 2003

In this study, a new simplified technology for fabricating high density trench gate DMOSFETs using only three mask layers and TEOS/nitride spacer is proposed. Due to the reduced masking steps and self-aligned process, this technique can afford to fabricate DMOSFETs with high cell density up to 100 Mcell/inch$^2$ and cost-effective production. The resulting unit cell pitch was 2.3∼2.4${\mu}$m. The fabricated device exhibited a excellent specific on-resistance characteristic of 0.36m$\Omega$. cm$^2$ with a breakdown voltage of 42V. Moreover, time to breakdown of gate oxide was remarkably increased by the hydrogen annealing after trench etching.

• Transactions on Electrical and Electronic Materials
• /
• 제17권4호
• /
• pp.222-226
• /
• 2016

This paper investigated the trench process, unified field limit ring, and other products for the development of a 500 V-level unified trench gate power MOSFET. The optimal base chemistry for the device was found to be SF₆. In SEM analysis, the step process of the trench gate and field limit ring showed outstanding process results. After finalizing device design, its electrical characteristics were compared and contrasted with those of a planar device. It was shown that, although both devices maintained a breakdown voltage of 500 V, the Vth and on-state voltage drop characteristics were better than those of the planar type.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1501-1502
• /
• 2011

In this paper, an investigation of the 8" process for Trench Power MOSFET Application and Trench MOSFETs and its impact on device performance is presented. Layout dimensions of trench power MOSFETs have been continuously reduced in order to decrease the specific on-resistance, maintaining equal vertical dimensions. We discuss experimental results for devices with a pitch size down fabricated with an unconventional gate trench topology and a simplified manufacturing scheme. The fabricated Trench MOSFETs are observed the trench gate oxidation by SEM.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권7호
• /
• pp.358-363
• /
• 2004

A new 600 V dual gate transistor employing thyristor action, which incorporates floating PN junction and trench gate IGBT, is proposed to improve the forward current-voltage characteristics and the short circuit ruggedness. Our two-dimensional numerical simulation shows that the proposed device exhibits low forward voltage drop and eliminates the snapback phenomena compared with conventional trench gate IGBT and EST The proposed device achieves high current saturation characteristics by separating floating N+ emitter and cathode. The proposed device achieves low saturation current value compared with conventional devices, and the short-circuit ruggedness is improved. The proposed device may be suitable for the use of high voltage switching applications.

• ETRI Journal
• /
• 제35권4호
• /
• pp.632-637
• /
• 2013

In this paper, we propose a superjunction trench gate MOSFET (SJ TGMOSFET) fabricated through a simple p-pillar forming process using deep trench and boron silicate glass doping process technology to reduce the process complexity. Throughout the various boron doping experiments, as well as the process simulations, we optimize the process conditions related with the p-pillar depth, lateral boron doping concentration, and diffusion temperature. Compared with a conventional TGMOSFET, the potential of the SJ TGMOSFET is more uniformly distributed and widely spread in the bulk region of the n-drift layer due to the trenched p-pillar. The measured breakdown voltage of the SJ TGMOSFET is at least 28% more than that of a conventional device.

• 전기전자학회논문지
• /
• 제21권1호
• /
• pp.1-6
• /
• 2017

본 논문에서는 플래너 게이트 및 트렌치 게이트의 구조를 동시에 가지고 있는 1200V급 이중 게이트 IGBT 소자를 제안함과 동시에 전기적인 특성을 분석하였으며, 분석된 결과를 가지고 플래너 게이트 및 트렌치 게이트 IGBT 소자의 전기적인 특성과 비교 분석하였다. 이중 게이트 IGBT 소자를 설계하는데 있어 문턱전압 및 온 상태 전압 강하에 영향을 주는 P-베이스 영역에 있어 P-베이스에 깊이는 트렌치 게이트 소자 영역에 영향을 주며, P-베이스에 너비는 플래너 게이트 소자 영역에 영향을 주는 것을 확인할 수 있었다. 본 연구에서 제시한 이중 게이트 IGBT 소자의 전기적인 특성인 항복전압은 1467.04V, 온 전압 강하는 3.08V, 문턱전압은 4.14V의 특성을 나타내고 있다.

• ETRI Journal
• /
• 제36권5호
• /
• pp.829-834
• /
• 2014

In this paper, a lateral power metal-oxide-semiconductor field-effect transistor with ultra-low specific on-resistance is proposed to be applied to a high-voltage (up to 200 V) integrated chip. The proposed structure has two characteristics. Firstly, a high level of drift doping concentration can be kept because a tilt-implanted p-drift layer assists in the full depletion of the n-drift region. Secondly, charge imbalance is avoided by an extended trench gate, which suppresses the trench corner effect occurring in the n-drift region and helps achieve a high breakdown voltage (BV). Compared to a conventional trench gate, the simulation result shows a 37.5% decrease in $R_{on.sp}$ and a 16% improvement in BV.

• 한국컴퓨터산업교육학회:학술대회논문집
• /
• 한국컴퓨터산업교육학회 2003년도 제4회 종합학술대회 논문집
• /
• pp.67-70
• /
• 2003

In this paper, propose a new structure of MOFET(Metal-Oxide-Semiconductor Field Effect Transistor) which is widely application for semiconductor technologies. Eleminate the latch-up effect caused by closed devices when conpose a electronic circuit using proposed devices. In this device have a completely isolation structure, and advantage of leakage current elimination. Each independent devices are isolated by trench-well and oxide layer of SOI substrate. Using trench gate and self aligned techniques reduces parasitic capacitance between gate and source, drain. In this paper, we proposed the new structure of SOI MOSFET which has completely isolation and contains trench gate electrodes and SOI wafers. It is simulated by MEDICI that is device simulator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1469-1471
• /
• 2001

A Dual Channel Trench IGBT (Insulated Gate Bipolar Transistor) is proposed to improve the latch-up characteristics. Simulation results by MEDICI have shown that the latching current density of proposed device was found to be 2850 A/$cm^2$ while that of conventional device was 1610 A/$cm^2$. The latching current desity of the proposed strucutre was 77.02% higher than that of conventional structre.