• 제목/요약/키워드: trench excavation method

검색결과 16건 처리시간 0.024초

트렌치 굴착에 있어서 경량 흙막이 구조체의 안정성 해석 (Stability Analysis of the Light Weight Earth-Retaining Structure in the Trench Excavation)

  • 서성탁;허창환;김희덕;지홍기
    • 한국농공학회논문집
    • /
    • 제46권2호
    • /
    • pp.93-103
    • /
    • 2004
  • In trench excavation, essential factor of earth-retaining temporary work structure should be easy taking to pieces and movement, and dead weight must be less. This paper studies about the light weight material and application as earth-retaining structure to prevent the slope failure of sand soil ground caused by the variation of groundwater level in trench excavation. That is, light weight earth-retaining structural is proposed and a simulation with FEM on application of proposed structural in sandy soil is presented. The results are summarized as follows; (1) The study proposed FRP H-shaped pannel for the light weight member, and also presented estimation method about stability. (2) Mechanical property (bending moment, shear force, axial force, displacement) were changed according to groundwater level, but these values had been within enough safety rate and allowable stress. Therefore, proposed light weight pannel with FRP is available for bracing structure in trench excavation.

개착 시공을 위한 트렌치 쉴드장비의 적용성 평가를 위한 실내실험 (Laboratory Experimental Test of the Applicability of a Trench Shield Machine for Open-cut Excavation Technology)

  • 이영민;사공명;김철한;송승철
    • 한국철도학회논문집
    • /
    • 제19권2호
    • /
    • pp.213-223
    • /
    • 2016
  • 도시에 밀집된 인구에 의하여 교통 혼잡이 빈번하게 일어나고 있으며 그에 따른 도시민의 불편이 증대 되었다. 이러한 교통 불편을 최소화 하는 방안으로 저심도 철도와 같은 다양한 교통시스템이 제안되고 있다. 본 논문에서는 경제적인 저심도 철도시스템 구축을 위하여 개발중인 트렌치쉴드의 설계와 더불어 소형 트렌치 쉴드 장비를 제작하여 트렌치 쉴드의 적용성에 대한 검토가 이루어졌다. 본 논문에서 도출한 트렌치 쉴드는 굴착부와 쉴드부, 추진부로 구성되어있다. 이렇게 검토 및 설계된 트렌치쉴드의 적용성을 검토하기 위하여 실내실험을 추진하였으며 이를 통하여 트렌치 쉴드를 통한 개착시공현장의 급속시공이 가능함을 확인하였다. 비록 실내실험이고 상대적으로 소규모의 실험이지만 트렌치 쉴드를 이용할 경우 3m/일의 시공속도 확보가 가능할 것으로 판단된다.

지하연속벽 시공 시 트렌치 굴착방법 개선을 통한 공기단축에 관한 연구: 현장적용사례를 중심으로 (A Study on the Compression of Construction Period by the Improvement of Trench Excavation for Slurry Wall Method)

  • 이영수;박형근;강규병
    • 대한토목학회논문집
    • /
    • 제32권5D호
    • /
    • pp.499-505
    • /
    • 2012
  • 도심지의 굴착공사 시 굴착심도가 깊어지고 있어 굴착공정에 따른 문제점들을 개선할 수 있는 방안에 대한 연구가 시급한 실정이다. 본 논문은 도심지 굴착공사 시 공사기간을 단축시키면서, 주변 구조물에 미치는 영향을 최소화 할 수 있는 굴착공법에 대한 연구이다. 본 연구의 방법으로 국내 및 국외에서 다수 시공된 벽식 지하연속벽의 공법인 Slurry Wall 공법의 문헌자료를 통해 지하연속벽 시공의 이론적 고찰을 실시하고, 기존 지하연속벽 공법의 트렌치 굴착 시 발생되는 비효율적인 시공단계의 주요한 문제점들을 분석하여 기술요소를 도출하였다. 도출된 기술요소를 반영하여 개선 가능한 새로운 공법을 제시하였고, 제시된 굴착공법을 현장에 적용한 사례를 바탕으로 기존 굴착공법과의 공사기간을 비교 분석하였다. 본 논문에서 제안된 공법을 현장에 적용한 결과, 기존예정공정표에 표시된 48일에서 15일 단축된 33일에 굴착공정을 마칠 수 있었다. 또한, 제안된 공법은 기존 지하연속벽 공법들에 비해 공기단축의 효과는 물론 경제성, 환경성 및 안정성 또한 뛰어난 것으로 기대되며, 향후 지하연속벽 시공의 공기단축에 기여하리라 사료된다.

저심도 철도 건설을 위한 트렌치 쉴드 장비 개발연구 (Development of a trench shield machine for the near-surface railway construction)

  • 이소오;사공명;김상환
    • 한국터널지하공간학회 논문집
    • /
    • 제17권2호
    • /
    • pp.175-187
    • /
    • 2015
  • 본 논문은 저심도 철도 건설을 위해 사용될 트렌치 쉴드 장비의 설계에 대한 내용을 다루고 있다. 저심도 철도는 도로 아래의 5~7 m에 설치되며 개착 공법으로 시공을 하게 된다. 개착 공법으로는 주로 가시설을 이용한 공법이 많이 이용하고 있는데, 현 기술 수준으로 가시설을 이용한 공법의 한계점으로 높은 시공비와 시공 기간을 들 수 있다. 이러한 단점을 극복하기 위한 트렌치 쉴드 장비의 개발이 진행되고 있다. 트렌치 쉴드 장비는 주변 토압을 지지하는 토류판과 하단부의 굴착기로 구성되어 있는데, 토류판이 가시설의 역할을 대신하며 전면 하단에 굴착기가 부착되어 굴착시간을 단축 시켜준다. 또한 굴착 후 바로 세그먼트를 삽입을 하기 때문에 시공시간을 상당히 절약할 수 있다. 본 논문에서는 트렌치 쉴드 장비의 주요 기능을 담당하는 굴착기의 비트 설계 및 요구되는 모터 동력의 산정에 대한 연구 내용을 서술하였다.

지하연속벽 공법 자동화 도입 타당성 검토 (Feasibility Study to Apply Automated Trench Cutter)

  • 박경순;구자경;이태식
    • 한국건설관리학회:학술대회논문집
    • /
    • 한국건설관리학회 2007년도 정기학술발표대회 논문집
    • /
    • pp.364-367
    • /
    • 2007
  • 도심지에서 수행하는 공사가 확대되면서 소음, 진동 등을 최소화하는 공법으로, 지하연속벽 공법이 제안되어 많은 활용이 이뤄지고 있다. 지하연속벽 공법은 기존 공법에 비해 대심도 굴착이 가능하며, 소음과 진동이 적어 활용도가 높음에도 불구하고 굴착 작업 간 수직도 확보를 위해 많은 시간이 소요된다. 공법의 적용이 이뤄지고 있는 현장방문 결과 건설기계를 통해 작업이 진행됨에도 불구하고 장비를 조작하는 조작자의 경험과 직관에 더 높은 의존도를 갖고 있는 것이 큰 문제로 조사되었다. 본 연구는 지하연속벽 공법의 주요 장비인 트렌치커터 운전기사 및 관련된 기술자들과의 인터뷰를 바탕으로 공법과 장비의 특성을 조사하고 Cost-oncern Matrix를 통해 굴착장비의 자동화 도입 타당성을 검토하였다. 연구를 통해 지하연속벽 공법에서 굴착 작업을 수행하는 트렌치커터를 자동화 하는 것이 타당한 것으로 판단된다.

  • PDF

경질점성토 지반에서 Trench 굴착시 지하수위 변동에 따른 가설구조체 안정해석 기법 (Stability Analysis Techniques of Bracing Structure in the Hard Clay Ground According to the Variation of the Groundwater Level at the Trench Excavation)

  • 허창환;서성탁;김희덕;지홍기
    • 한국방재학회 논문집
    • /
    • 제3권2호
    • /
    • pp.99-110
    • /
    • 2003
  • 본 연구에서는 트랜치 굴착시 토석붕괴 방지시설에 대한 시공상의 안전성과 시공성 그리고 작업성에 주안점을 두어 재료의 경량화 및 구조체의 표준화를 시도하였다. 즉, 위험도 사전평가와 안전관리기법을 검토하고 흙막이 부재의 적용성과 흙막이 구조의 역학적 안정성을 검토하였으며, 이들 결과로부터 흙막이 구조체의 역학적 거동매카니즘 규명과 규격의 표준화를 위하여 경량흙막이 구조체의 구조안전성과 구조해석을 실시하였으며, 그 결과를 요약하면 다음과 같다. 1) 흙막이 구조의 역학적 타당성과 토질역학적 조건을 고려한 신소재 활용성을 확보하기 위하여 흙막이 부재의 역학적 성능과 부재에 작용하는 토압정수를 제시하였으며, 흙막이 구조체의 해석이론과 방법을 제시하였다. 2) 강화합성수지(FRP)를 사용한 경량판넬 부재의 지질구조가 경질점성토인 조건을 대상으로 구조해석 결과, 지하수위 조건에 따라서 판넬의 역학적(휨모멘트, 전단력, 축응력) 특성이 변화하고 있었으며, 역학적 해석결과가 허용응력 범위에 있음을 알 수 있어 이는 경량판넬이 트랜치 굴착시에 흙막이 구조로서 유용성을 알 수 있었다.

IPS 흙막이 공법의 개발 (Development of Innovative Prestressed Support Earth Retention System)

  • Kim, Nak-Kyung;Park, Jong-Sik;Han, Man-Yop;Kim, Moon-Young;Kim, Sung-Bo
    • 한국지반공학회논문집
    • /
    • 제20권2호
    • /
    • pp.107-113
    • /
    • 2004
  • 본 논문에서는 강선의 선행하중을 이용한 새로운 흙막이 공법의 원리와 적용 사례를 다루고자 한다. IPS(Innovative Prestressed Earth Retention System) 흙막이 공법은 띠장에 강선의 인장력을 적용한 선행하중 공법이다. IPS 흙막이 공법은 강선, H-Beam 받침대, 띠장으로 구성된 띠장에 강선의 긴장력을 도입하여 굴착 지반에 선행하중을 가하고 지반의 추가 굴착으로 인한 토압의 증가를 IPS 띠장과 트러스 버팀보 또는 코너 스트럿으로 지지하는 개념을 가지고 있다. IPS 흙막이 공법은 경제성, 시공성, 안정성을 제공하며 휨 강성이 큰 IPS 띠장을 이용하여 지지 간격을 획기적으로 증대시킨 특징을 가지고 있다. 본 논문에서는 IPS 흙막이 공법의 기본 원리 및 메커니즘을 설명하고 IPS 흙막이 공법의 특징, 적용 범위와 설계 방법을 언급하였다. IPS 흙막이 공법의 현장시험을 수행하여 현장 적용성과 안정성을 확인하고 현장 계측결과를 분석하여 IPS 흙막이의 거동을 파악하였다.

트렌치 조사에 의한 울산 단층 중북부의 고지진학적 연구 (Paleoseismological Study on the Mid-northern Part of Ulsan Fault by Trench Method)

  • 경제복
    • 지질공학
    • /
    • 제7권1호
    • /
    • pp.81-90
    • /
    • 1997
  • 한국의 역사 문헌에 의하면 파괴적인 피해를 동반한 대지진들이 1-8 세기와 16-17 세기에 주로 경주와 울산 부근에서 발생했다. 울산단층 동부 지역에서의 선구조선들의 분포를 NNE-SSW, NE-SW, NS 성분이 우세하게 나타나며 울산단층은 중북부에서 세 방향으로 분기하는 단층계를 형성한다고 보여진다. 울산단층은 중북부에서의 트렌치 조사에 의하면 본 단층은 마지막 빙기 (약 25,000 B.P)동안의 심한 결빙작용으로 나타나 엽리구조를 포함하는 사면 퇴적물을 절단하고 있으며 트러스트 성분의 단층운동이 2회 발생한 흔적을 보인다. 야외 노두와 트렌치 조사에 의하면 울산 단층은 제 4 기 후기 이후에도 여러회 활동한 단층으로 추정된다.

  • PDF

구조물 겸용 흙막이 스트러트 공법 (Development of Struts for Soil Shuttering as a Permanent System)

  • 홍원기;김선국;김희철
    • 한국건설관리학회논문집
    • /
    • 제5권3호
    • /
    • pp.71-78
    • /
    • 2004
  • In conventional method of supporting soil shuttering wall during excavation a system of struts and wales to provide cross-lot bracing is common in trench excavations and other excavations of limited width. This method, however, becomes difficult and costly to be adopted for large excavations since heavily braced structural systems are required. Another expensive and unsafe situations are expected when temporary struts must be removed for the construction of underground structures. This paper introduces innovative strut systems which can be used as permanent underground structures after its role as brace system to resist earth pressure during excavation phase. Underground structural system suggested from architect is checked against the soil lated pressures before the analysis of stresses developed from gravity loads. In this technology, named SPS(Struts as Permanent System), retaining wall is installed first and excavation proceeds until the first level of bracing is reached. Braces used as struts during excavation will serve as permanent girders when buildings are in operation. Simultaneous construction of underground and superstructure can proceeds when excavation ends with the last level of braces being installed. In this paper, construction sequence and the calculation concept are explained in detail with some photo illustrations. SPS technology was applied to three selected buildings. One of them was completed and two others are being constructed Many sensors were installed to monitor the behavior of retaining wall, braces as column in terms of stress change and displacement. Adjacent ground movement was also obtained. These projects demonstrate that SPS technology contributes to the speed as well as the economy involved in construction.

SEMI-SHIELD 공법의 설계 및 시공상 문제점 (Design and Construction Problems of Semi-Shield Method)

  • 김종인;정성남;박영건
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.1275-1282
    • /
    • 2009
  • The tunnel excavations are used for construction of common utility tunnel, electric tunnel, communication line tunnel, water supply and public sewerage pile line in urban area. The trench cut methods were mainly used in the past, but now, tunneling method is more being used. The tunnel excavation method like as NATM, Messer-Shield, Semi-Shield Methods are being applied to small section tunnel in Korea. The actual construction results of seme-shield method are increasing due to simplified construction process and reduced noise and vibration. And also this method is being used frequently in waterway tunnel and construction of prevention flooding recently. The seme-shield method design guideline is absence except for electric line tunnel construction in Korea, because of the semi-shield method was developed in Europe and Japan. In the prescriptive design, engineer's subjects are tending to intervene, because of absence of standard and specification for details. Therefore, Design and Construction Problems of Semi-Shield Method were described and construction trouble was introduced for exam. These problem and construction troubles have to be examined thoroughly in advance.

  • PDF