• 한국공작기계학회논문집
• /
• 제11권3호
• /
• pp.57-64
• /
• 2002

Finite element program(ANSYS) estimated thermal deformation quantity in high frequency heat treatment process of a machine tool fred drive system slideway and apply deformation quantity in roughing process. Having processed the heat treatment minimizing methods of the quantity of deformation heat treatment process. Having done heat treatment with high frequency after taper processing with considering the existed heat treatment generating the quantity of deformation, existed quantity of deformation can be reduced down to 80%, consequently productivity and material saving can be achieved. When high frequency heat treatment finite element method estimated deformation quantity at difference temperature and time, it is progress at cost don and saved time.

• Journal of Yeungnam Medical Science
• /
• 제34권2호
• /
• pp.169-173
• /
• 2017

Perianal Crohn's disease is a major problem that impair quality of life. This article reviews the current surgical treatment of Crohn's perianal fistula. Fistulotomy and loose seton are commonly used surgical methods for treatment of perianal Crohn's disease. Mucosal advancement flap and fibrin glue are used in this treatment, despite a lake of controlled trials. Fecal diversion is disturbingly high in complicated complex perianal fistula in Crohn's disease. Ligation of intersphincteric fistula and autologous or allogenic stem cells are new surgical procedures for treatment of Crohn's disease that need further studies. Treatment success might be improved by multimodal treatment and new surgical and medical treatment options.

• 대한한방소아과학회지
• /
• 제31권2호
• /
• pp.14-24
• /
• 2017

Objectives The study was conducted to evaluate the recent treatment and study trends of tic disorder by reviewing domestic and international randomized controlled studies. Methods The acupuncture treatment on tic disorder randomized control study articles (published by June 10th, 2016) were selected from seven academic literature archives; NDSL, OASIS, KTKP, Pubmed, J-STAGE, CNKI, and CINAHL. Results Ten articles were identified after searching. These studies were analyzed by year, diagnostic criteria, intervention, evaluation criteria, treatment points, treatment effect, treatment duration, and 'Risk of Bias' assessment. Conclusions According to the articles, acupuncture was effective in treating tic disorder. However, additional well-designed randomized controlled studies will be required to justify the effectiveness of acupuncture treatment on tic disorder.

• 척추신경추나의학회지
• /
• 제1권2호
• /
• pp.31-39
• /
• 2006

Objectives: The objective of this study is to investigate the change of Myofascial Meridian treatment as literature. Methods: We arranged many kinds of medical literature related to Myofascial Meridian treatment. Results: The Myofascial Meridian treatment originated from Young-Chu(靈樞) was developed for many centuries. Conclusion: The modern western treatment like Myofascial Pain Syndrome therapy, Rolling therapy, Myofascial Release, Proproioceptive Neuromuscular Facilitation and Kinesio taping treatment is thought to be connected with Myofasical Meridian treatment.

• 동력기계공학회지
• /
• 제11권4호
• /
• pp.86-91
• /
• 2007

This study was investigated to know the effect of subzero treatment in austempered ductile cast iron. Retained austenite transformed to martensite by subzero treatment. With decreasing subzero treatment temperature, more volume fraction of retained austenite transformed to martensite and transformed to martensite above 30% by subzero treatment temperature at $-196^{\circ}C$. With decreasing subzero treatment temperature, the value of strength and hardness increased but the value of elongation and impact value decreased. In case of subzero treatment at $-196^{\circ}C$, hardness value increased about 18% and impact value decreased by above 20%. We could find that subzero treated specimens had a little of effect on the tensile properties but had very much effect on the hardness and value of the impact.

• 열처리공학회지
• /
• 제17권5호
• /
• pp.278-282
• /
• 2004

Effect of pre-treatment on the gas nitriding process of austenitic stainless steels has been investigated and the following results were obtained. Minimum pre-treatment time was decreased to 5min with increasing treatment temperature from $200^{\circ}C$ to $600^{\circ}C$. Surface activation effect by the pre-treatment was maintained in the air up to holding time of 64hr, judging from the analysis result of gas nitrided specimens. The Depth of nitrided layer of STS 304 and 316 stainless steels were ranged from $5{\mu}m$ to $90{\mu}m$ at $440^{\circ}C{\sim}600^{\circ}C$. The X-ray diffraction intensity for austenitic stainless steels were increases as nitriding temperature from $440^{\circ}C$ to $600^{\circ}C$.

• The Journal of Advanced Prosthodontics
• /
• 제2권2호
• /
• pp.58-60
• /
• 2010

Presurgical prosthetic treatment planning is critical for the success of the implant prosthesis. Inadequate treatment plan, due to insufficient discussion between prosthodontist, and surgeon, may result in poor prognosis. A 26-year-old male patient was referred for prosthodontic treatment after implant was placed in the area of teeth #17,16, 22, 25 and 27, without adequate discussion nor the treatment planning between oral surgeon and prosthodontist. It was found that the patient had two hopeless teeth, and a severely resorbed alveolar ridge. Additional tooth extraction was needed and the type of definitive prosthesis was shifted from fixed type to removable one. Proper pre-surgical treatment planning is essential for the good prognosis. Implant-supported removable prosthesis on milled bars may be a useful treatment option in patients with incorrect angled placement on severely resorbed alveolar ridge.

• 한국의류산업학회지
• /
• 제3권4호
• /
• pp.357-361
• /
• 2001

This paper is concern with the effect of various conditions on mechanical properties of textile fabrics by water soluble resin treatment. Resin treatment of cotton, acetate, viscose rayon, polyester, nylon and acryl fabrics were made by aqueous resin treatment to improve the mechanical properties. The mechanical properties of fabrics, the breaking strength and strain were measured and surface reflectance was measured by color eye. The breaking strength and surface reflectance of fabrics by water soluble resin treatment showed difference by the different treatment concentration. The surface reflectance was increased by water soluble resin treatment. The breaking strength was lower in fabrics with resin treatment than fabrics with none treatment.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.15-20
• /
• 2008

The objectives of this study are to analyze the energy independence plan and to propose a suitable sewage treatment plant in Korea. The total amount of electricity consumption for public sewage treatment plant was estimated as 1,182 GWh in 2007. It was estimated that total 16 sewage treatment plants with renewable energy systems produced electricity of 15.2 GWh per year, which could replaced 0.8% of total electricity used for sewage treatment. It was found that domestic sewage treatment plants with power generation plants by digestion gas were installed in 7 places and produced electricity of 13 GWh per year. It was also found that the power generation plants by digestion gas were the most cost-effective for sewage treatment out of the renewable energy systems based on the benefit-cost analysis.

• Journal of Oral Medicine and Pain
• /
• 제23권3호
• /
• pp.263-270
• /
• 1998

Considering various factors contributing oral malodor, the accurate prediction of prognosis is very important to both clinician and patients. The present study has been performed to invetigate the relationship between treatment effeicacy and pre-treatment volatile sulfur compounds (VSC) level. Ninety patients were divided into three groups, A(<150ppb), B(150< <200ppb), and C(>200ppb) groups, according to pre-treatment VSC level detected by Halimeter, and each group included 30 patients. Routine therapeutic measures for oral were provided to each patient which consisted of oral prophylaxis, tooth brushing and flossing instruction, tongue scraping by proper device, and gargling of 0.25% ZnCl2 Solution. The group with high pre-treatment VSC level (>150ppb) showed significant reduction of VSC level at 1 and 3 weeks after. However, the group with low pre-treatment VSC level (<150ppb) did not show any significant reduction during the experimental periods. Collectively, the results suggested that patients with high pre-treatment VSC level show better prognosis.