• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.202-203
• /
• 2009

Plasma etching was studied to obtain high-efficiency Si solar cells. SiN nanoparticles were observed upon the plasma treatment using SF6 gas. The mechanism of the nanoparticles formation has been studied. A net increase in the current density (Jsc) of the cells of $1.7mA/cm^2$ and in the conversion efficiency ($\eta$) of 2.1% is obtained after the plasma treatment for 10s, thanks to the significant decrease of reflection in the shorter wavelength range.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.2
• /
• pp.23-33
• /
• 1999

After studying several methods of the application a device of a treated sewage in anticipation of the future shortage of the duty of water, we could have some conclusion as the following : Advanced treatment systems arc essential prerequisites in reusing a treated sewage. And in a short term, the application of reusing a treated sewage should go first to new building areas near the sewage but for the long run, it should cover the whole area of Taegu, it is desirable that the pipe line networks which include dual water systems as well as water supply should be spread throughout the whole city. The city authorities have to make every effort to step up publicity activities on this plan to all the citizens and building owners to steadily carry out this project and encourage private constructors to participate with the help of SOC. And for the long run, it is desirable that the application of reusing a treated sewage should be obligatory.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.428-428
• /
• 2013

Red color light emitting diodes were fabricated using CdSe/CdS/ZnS quantum dots (QDs). Patterned indium-tin-oxide (ITO) was used as a transparent anode, and oxygen plasma treatment on a surface of ITO was performed. Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) was spin coated on the ITO surface as a hole injection layer. Then CdSe/CdS/ZnS QDs was spin coated and thermal treatment was performed for the cross-linking of QDs. TiO2 was coated on the QDs as an electron transport layer, and 150 nm of aluminum cathode was formed using thermal evaporator and shadow mask. The device shows a pure red color emission at 606 nm wavelength. Device characteristics will be presented in detail.

• Journal of the Korean Society of Combustion
• /
• v.22 no.1
• /
• pp.23-31
• /
• 2017

Large-scale fuel tanks emit massive amount of hardly-combustible VOC mixtures which are light hydrocarbon species in dilution with nitrogen and carbon dioxide. We have developed a lab-scale burner to combust those VOC mixtures by use of a turbulent partially-premixed flame as a pilot flame. For a higher HC treatment ratio, the mixture gases were reformed by a rotating arc plasma device. The results showed that the nitrogen mole fraction and the injecting speed of the VOC mixture influence on the performance of the burner. It was also found that the size of the pilot flame and the power supplied to the plasma device determine the overall HC treatment ratio and the concentrations of CO and NOx in the exhaust gas.

• 전자공학회논문지 IE
• /
• v.43 no.4
• /
• pp.1-7
• /
• 2006

In this paper, two types of blue organic light-emitting device were designed. We have analyzed the characteristics of Type I device without a hole blocking layer, and analyzed the characteristics of Type II device using a hole blocking layer of BCP or BAlq materials with 30 ${\AA}$ thickness. We obtained the ITO having the work function value of 5.02 eV using $N_2$ plasma treatment method with the plasma power 200 W. Type I device structure was ITO/2-TNATA/$\alpha$-NPD/DPVBi/$Alq_3$/LiF/Al:Li, and type II device structure was ITO/2-TNATA/$\alpha$-NPD/DPVBi/HBL/$Alq_3$/LiF/Al:Li. We have analyzed the characteristics of Type I and Type II device. The characteristics of the device were most efficiency on occasion of using a hole blocking layer of BAlq material with 30 ${\AA}$ thickness. Current density was 226.75 $mA/cm^2$, luminance was 10310 $cd/m^2$, Current efficiency was 4.55 cd/A, power efficiency was 1.43 lm/W at an applied voltage of 10V. The maximum EL wavelength of the fabricated blue organic light-emitting device was 456nm. The full-width at half-maximum (FWHM) for the EL spectra was 57nm. CIE color coordinates were x=0.1438 and y=0.1580, which was similar to NTSC deep-blue color with CIE color coordinates of x=0.14 and y=0.08.

• Journal of Oral Medicine and Pain
• /
• v.23 no.3
• /
• pp.263-270
• /
• 1998

Considering various factors contributing oral malodor, the accurate prediction of prognosis is very important to both clinician and patients. The present study has been performed to invetigate the relationship between treatment effeicacy and pre-treatment volatile sulfur compounds (VSC) level. Ninety patients were divided into three groups, A(<150ppb), B(150< <200ppb), and C(>200ppb) groups, according to pre-treatment VSC level detected by Halimeter, and each group included 30 patients. Routine therapeutic measures for oral were provided to each patient which consisted of oral prophylaxis, tooth brushing and flossing instruction, tongue scraping by proper device, and gargling of 0.25% ZnCl2 Solution. The group with high pre-treatment VSC level (>150ppb) showed significant reduction of VSC level at 1 and 3 weeks after. However, the group with low pre-treatment VSC level (<150ppb) did not show any significant reduction during the experimental periods. Collectively, the results suggested that patients with high pre-treatment VSC level show better prognosis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.577-578
• /
• 2022

This study addresses the effectiveness of a VR model that is designed to relieve distress and improve communication during pediatric dental treatment for 3-9 year-old young patients. This is due to the challenging nature of the dental treatment for both young patients and pediatric dentists. The proposed model is designed to alleviate the unpleasant experience a young patient might go through during the dental treatment through providing a VR content to be displayed in on a head-mounted device during the treatment session. In addition, the model is designed to help decrease the frequent movement of the young patient during the dental treatment session by directing the patient's head to the immersive VR content. Furthermore, the model could solve the communication difficulties that might occur between pediatric dentists and young patients during the treatment session by showing live instructions related to adjusting body postures

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2005.11a
• /
• pp.181-182
• /
• 2005

• Proceedings of the KTCVS Conference
• /
• 1993.06a
• /
• pp.133-133
• /
• 1993

• Journal of dental hygiene science
• /
• v.13 no.1
• /
• pp.105-114
• /
• 2013

The purpose of this study was to offer information to medical institution of specializing in orthodontic patients by surveying the influence of orthodontic patients' perception of treatment according to orthodontic treatment upon satisfaction and recommendation with orthodontic treatment, targeting patients with completion of orthodontics who have experience of having received orthodontic treatment. As a result of SAS ver. 9.1 analysis on what was surveyed from February 2010 to August, the following conclusions were obtained. In comparing perception of treatment on orthodontic treatment according to general characteristics, women compared to men were indicated to be higher (p<0.05) in inconvenience recognition (p<0.05) on orthodontic device and in inconvenience during orthodontic treatment (p<0.05). In perception of treatment on orthodontic treatment, the inconvenience of orthodontic device accounted for 79.3%, thereby having been recognized by the majority of subjects. Even the inconvenience during orthodontic treatment was being recognized by 69.8%. The orthodontic treatment expenses appeared enough to be expected by 61.6%. The frequency of visiting hospital during orthodontic treatment was indicated as saying of having been proper by 72.8%. The period of orthodontic treatment was indicated to be proper as well by 61.2%. Even understanding about treatment contents during orthodontic treatment was indicated to be understood by 62.6%. In the results of correlation among subjects' cooperation with dental treatment, satisfaction with treatment service, recommendation of this clinic, and satisfaction with the convenient facilities, the significantly positive correlation was shown (p<0.05) in all among items in each.