• International Journal of Railway
• /
• 제1권2호
• /
• pp.31-36
• /
• 2008

$DF_{21}$ diesel locomotive was designed to satisfy the requirement of Kunming Meter track and the 2Co self-guided radial bogie was used to suit the complex curve track. There are totally 12 locomotives was served on the track. The first two locomotives were devotion running on the track since April 2003, the wheel tread splling was occurred on the middle wheel set of the two locomotives after running nearly 150 thousands km on the track of the two locomotives at August 2004. The dynamic analysis was carried out to find the reason. The wheel set longitudinal vibration resonance phenomenon was existed on the locomotive dynamic performance, and this was caused by the too big longitudinal stiffness of the journal box bar on the middle wheel set. Wheel set longitudinal vibration resonance maybe an important reason of lead to wheel tread spalling. The corresponding mend methods were put forward from the point of view of wheel set longitudinal vibration resonance. All the wheel tread of the 12 locomotives on the middle wheel set were in good condition and not occurred the wheel tread spalling after the mend till December 2007 after 350 thousands km were finished. The mechanism of the wheel tread splling and corresponding mend method was discussed in detail in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.100-105
• /
• 1992

Texture is one of the important characteristics that has been used to identify objects or regions of interest in an image. Tire tread patterns can be considered as a kind of texture, and these are classified with a texture analysis method. In this sense, this paper proposes a new algorithm for the classification of tire tread pattern. For the classification, cooccurrence matrix for the binary image is used. The performances are tested by experimentally 8 different tire tread pattern and the robustness is examined by including some kinds on noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.266-269
• /
• 2006

Tire is in charge of a lot of function, which is supporting vehicle load, transferring traction and. brake, absorbing impact by road etc. As the silence of vehicle increase more important, the importance of tire noise is more raised. In recent, the study on reduction of tire noise is generally processed. Tire noise is divided in structure home noise and all borne noise. Tire tread properties have a lot of multiplicity. Rubber properties are caused by changing or tread hardness. That change Elastic Modulus and Loss Modulus, which is related by tire noise. In the study, we found that road noise is affected by tread hardness

• Proceedings of the KSME Conference
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.632-635
• /
• 2007

Automobile tire has very complicated shape and is composed of rubber, steel cord and ply cord, Tread pattern of tire is very essential for the basic characteristics of tire, such as braking, acceleration and comfortableness. Tire components such as tread, sidewall, and spex are prepared by forcing uncured rubber compound through an extruder to shape during curing process. Because of its complexity of shape, adaptive mesh refinement was used for the analysis of tire tread. Effects of forming variables were evaluated.

• Journal of the Korean Society for Precision Engineering
• /
• 제11권6호
• /
• pp.98-108
• /
• 1994

An assessment of a mathematical method of synthesing tire tread pitch noise spectra is studied. The method is based on the summation of phasors and the calculated spectra are conveniently generated as computer printout in the form of bar graph. The technique, its usefulness, its limitations and the implications of using such a model are discussed. This paper presents a basic study on optimum pitch arrangement for prediction and control of tire tread pitch noise in constraint condition relatied with tire properties, thus enabling optimum tread pitch arrangements to be determined at the design stage, by application of old tire tread pitch simulation.

• Journal of Korean Society for Atmospheric Environment
• /
• 제3권2호
• /
• pp.39-45
• /
• 1987

Rubber particles emitted from automobile tire tread by abrasion were collected by Andersen sampler with atmospheric dusts. The samples of atmospheric dusts at each stage were analysed for rubber particles by Curie point pyrolysis-gas chromatography with Apiezon grease L column. Pyrolysis was done at 740$^circ$C for 5 seconds. In the pyrogram, NR rubber (bus and truck tire tread) was determined by isoprene peak, and SBR rubber (passenger car tire tread) was determined by styrene peak simultaneously. The size distribution of rubber particles was proportioned with the size of rubber particles. The concentrations of NR and SBR rubber were 0.23 $\mug/m^3$ and 1.31 $\mug/m^3$, respectively, in the atmospheric dusts which were collected from the street in front of Yonsei University on April 1986. The ratio of tire tread rubber in the atmospheric dusts was about 0.63%.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제27권10호
• /
• pp.1615-1622
• /
• 2003

Being contacted directly with. ground, the tire tread part is in shape of complex patterns of variable ASDs(anti-skid depth) to satisfy various tire performances. However, owing to the painstaking mesh generation job and the extremely long CPU-time, conventional 3-D tire analyses have been performed by either neglecting tread pattern or modeling circumferential grooves only. As a result, such simplified analysis models lead to considerably poor numerical expectations. This paper addresses the development of a 3-D tire mesh generation considering the detailed tread pattern and shows that the contact pressure and frictional energy distribution of tires considering the detailed pattern become better than those by the simplified tire model.

• Proceedings of the KSME Conference
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.330-335
• /
• 2001

While contacting directly with ground, the tire tread part is in shape of complex patterns of variable ASDs(anti-skid depth) for various tire performances. However, owing to the painstaking mesh generation job and the extremely long CPU-time, conventional 3-D tire analyses have been performed by either neglecting tread pattern or modeling circumferential grooves only. As a result, such simplified analysis models lead to considerably poor numerical expectations. This paper addresses the development of a systematic 3-D mesh generation of tires considering the detailed tread pattern. Basically, tire body and tread meshes are separately generated, and then both are to be combined. For the systematic mesh generation, which consists of a series of meshing steps, we develop in-house subroutines which utilize the useful functions of I-DEAS solid modeler. The detailed pattern mesh can be imparted partially or completely.

• The Korean Journal of Ecology
• /
• 제17권2호
• /
• pp.149-157
• /
• 1994

To investigate the causes of distribution of Kummerowia striata (Thunb.) Schindl. mostly restricted on the roadside and reclaimed land, plant growth was analyzed under different of tread-pressures: $P_1$(10 times/day, $16.34Kg/cm^2$), $P_2$(20 times/day, $31.52 Kg/cm^2$), $P_3$(30 times/day, $40.79 kg/cm^2$) and the control $P_c$(0 times/day, $3.73 Kg/cm^2$). The matter production in the $P_1$decreased compared with that in the $P_c$, and those in the $P_2$and $P_3$ continuously decreased so that its length growth gradually decreased and, in particular, the growth of leaves and nodule was suppressed. The number of leaves and roots tended to increase in the $P_2$and $P_3$. The water contents of roots following the increase of tread-pressure increased continuously. Following the increase of tread-pressure, T/R ratio and C/F ratio tended to increase. Kummerowia striata showed the highest growth in the $P_c$ and showed 26% relative growth in the $P_1$compared with that in the $P_c$. This plant showed 8% relative growth in the $P_3$, which is excess to the tread-pressure $21Kg/cm^2$, the limit of growth in the plant. Because this plant grew continuously in the P$_3$, the tread-pressure is regarded as an important factor affecting the roadside distribution of this plant.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제14권6호
• /
• pp.95-103
• /
• 2006

Wheel treads of E.M.U. are usually under a heavy thermal load by brake frictional heat between wheel and brake shoe and damaged by repeated thermal and mechanical loads. To examine the cause of wheel tread damage of E.M.U.'s in service running, a systematic approach has been used. This study is composed of three parts. Frictional heat analysis was conducted in the first part by finite element method. Two kinds of brake shoes in service were considered. In the second part, experimental study was carried out on a brake dynamometer. Temperatures were measured for the two brake shoes. And experimental study in service running E.M.U.'s was performed. Wheel and brake shoe temperatures were measured by using thermocouples and temperature indicating strips. Finally metallurgical characteristics were examined by a SEM/EDS and the cause of the wheel damage was analyzed. It seems that aggregated ferrous component is a main cause of the wheel tread damage.