• Korean Journal of Poultry Science
• /
• v.21 no.1
• /
• pp.1-19
• /
• 1994

This study was carried out to investigate the effects of shperical surface of eggs tray and eggshell on breaking strength of eggs for the development of a new egg tray design to prevent eggshell breakage. The results obtained were as follows: 1. According to the results obtained from investigation on the types of 22 egg trays collected from 9 countries(USA, Italy, France, Thailand, Japan, Netherland, Russia, Korea and Swiss), all egg trays except those from Korea were different in their types. 2. According to the determination of breaking strength for 4 pilot egg trays, type B and D were high in breaking strength. Trays B and D which would fit with the spherical surface of egg so that they could increase breaking strength were most recommendable. Breaking strength was not increased even though egg tray was strong. Thickness of eggshell of experimental eggs used in this experiment have no significance (P>0.05). 3. When eggs are packed and transported in egg tray, the breaking strength will depend on how much spherical surface of egg are covered by the spherical surface of the egg tray. Therefore, the inner spherical surface of egg tray must fit to the outer spherical surface of eggs when the egg tray is manufactured. 4. At present, there is only one type of egg tray being used in Korea despite the various egg sizes. In order to minimize the eggshell breakage, however, proper sizes or types of egg trays should be developed for each different categories of the egg size.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.242-254
• /
• 2000

Accurate impression is very important to achieve desirable prosthesis and there are many factors in taking a good impression. For example, types of impression material, types of impression tray, impression taking methods and so on. Recently individual tooth tray technique is accepted as obtaining good impression that can be applied to multiple abutment impression, heavy salivated patient, to minimize the effect of natural teeth s undercuts and to reduce pain during cord packing procedures. The purpose of this study was to compare the accuracy according to materials and forms of the individual tooth tray which is clinically applied nowadays. Used materials in experiment were divided into 3 types (acrylic resin. $Futar^{(R)}$ occlusion. $Blu-mousse^{(R)}$) and forms were divided into 2 types (forming occlusal vent hole or not and forming marginal vent space or not). Stone master model from impression body and metal master model were measured by $X-PLAN360d^{(R)}$ to compare occlusal surface discrepancy and marginal discrepancy. The results were as follows: 1. In comparison of occlusal surface discrepancy and marginal discrepancy according to materials, groups with three materials showed no statistical difference 2. In comparison of occlusal surface discrepancy and marginal discrepancy according to occlusal vent hole, groups with occlusal vent hole showed significantly less marginal discrepancy than groups with no occlusal vent hole(p<0.05). 3. In comparison of occlusal surface discrepancy and marginal discrepancy according to 0.5mm-marginal-vent-space, groups with no 0.5mm-marginal-vent-space showed significantly less marginal discrepancy than groups with 0.5mm-marginal-vent-space (p<0.05). In summary these results suggest that individual tooth tray made of 3 types of materials with occlusal vent hole and individual tooth tray made of acrylic resin with no marginal vent space showed good accuracy of impression. In addition, individual tooth tray which is made of bite registration materials may be more useful because of advantage in facility and timesaving aspect of fabrication.

• Journal of Bio-Environment Control
• /
• v.16 no.1
• /
• pp.62-66
• /
• 2007

This study was carried out to develop the stable plug seedling production for hydroponics of spinaches by various nursery media, plug tray size and seed number per plug tray cell. When plant grown in various nursery media, the seeding stand rate was shown in order of granular rockwool with good water retention, granular rockwool>granular rockwool mixed with pearlite>cocopeat>pearlite>poly urethane foame. Thus, poly urethane foame indicated the lower seedling stand rate. There was no difference in growth of the seedlings md the seeding stand rate by the plug tray size, and no significant difference in the plant height and the number of leaves among the seed number per plug tray cell. But, leaf area of plant in 2 grains seeding per cell was $113.0cm^2$, was wider in compared with 5 grains seeding of which leaf area was $88.0cm^2$. Accordingly, the leaf area per plant decreased as more and more the number of seeds per plug tray cell increased. The fresh weight of a plant per plug tray cell was the heaviest with 12.5g in the 2 grains, and the total fresh weight of plants per cell was 33.9g in 4 grains seeding, thus it tended to was bigger compared with other treatments. Consequently, given that the number of seeds per cell was decreased, the fresh weight of a plant increased. On the other hand, the total fresh weight per cell showed a tendency to be reducing as more and more the number of seeds per plug tray cell decreased. The yield in the 4 grains seeding was increased by 46% as $14,910kg{\cdot}ha^{-1}$ in compared with the yield in 2 grains seeding as $10,200kg{\cdot}ha^{-1}$.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2008

Quality attributes of fresh-cut pak-choi (Brassica campestris var. chinensis) as affected by hydrocooling and packing were investigated in terms of weight loss, respiration, vitamin C content, total chlorophyll content, microbial load and sensory properties during storage at 4 and $10^{\circ}C$. Fresh pak-choi was trimmed and washed with cold water $(1^{\circ}C)$ as well as tap water $(6^{\circ}C)$ for 30 sec 3 times and then packaged in PP (polypropylene) film bag and PETE (polyethylene terephthalate) bay, and stored for 9 days at 4 and $10^{\circ}C$. Weight loss was decreased by washing and packing generally. Respiration rate was increased slowly over the storage at $4^{\circ}C$. Vitamin C content and total chlorophyll contents of pak-choi packaged within PETE bay decreased gradually during storage. Hydrocooling and packing within PETE bay treatments resulted in approximately 1-2 log CFU/g reduction of microbial load.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.360-366
• /
• 1989

Reduced order steady state models for separation columns are developed. The accuracy and efficiency of the reduced order models are also demonstrated by comparing the simulation results obtained using the reduced order models with rigorous tray by tray calculations.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.324-332
• /
• 2012

The purpose of this study was to evaluate the effects of container types on seedling growth of Betula costata, Liriodendron tulipifera, Fraxinus rhynchophylla, Fraxinus mandshurica, Zelkova serrata, and Ulmus parvifolia in the container nursery system. We used three container types [20 cavities (150 seedlings/$m^2$-400 mL), 24 cavities (200 seedlings/$m^2$-320 mL), and 35 cavities (260 seedlings/$m^2$-240 mL)] and measured root collar diameter (RCD), height, biomass, seedling quality index (SQI), and root density. The root collar diameter, height, biomass, SQI, and root density of seedlings were the highest at 20 cavities/tray in all six species because this container type has the largest volume and lowest seedling density. However, F. rhynchophylla growth at both 20 and 24 cavities/tray, Z. serrata growth at both 24 and 35 cavities/tray and B. costata growth at all sizes were not significantly different. As expected, container volume was positively correlated with RCD, height, and biomass of five species except for Z. serrata, but seedling density negatively did. Based on these results, 20 cavities/tray are optimal for L. tulipifera, F. mandshurica, and U. parvifolia, 20 or 24 cavities/tray for F. rhynchophylla, 24 or 35 cavities/tray for Z. serrata, and 35 cavities/tray for B. costata, respectively. Usage of optimal container will make us get good quality seedlings as well as reduction of production costs in the container nursery.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1726-1732
• /
• 2008

Injection molding is one of plastic forming technology which can easily mass-produce plastic parts with various and even complex shape. The technology has lots of difficulties in making a good part due to phase change of material, high applied pressure, and fast melt flow speed in the cavity. To overcome the problems, they had to make trial and error method until the CAE(Computer Aided Engineering) could be a tool for concurrent engineering. In this paper, we investigate the optimal design for a plastic DVD tray part by systematic approach of the commercial CAE program. In design, we should consider two objectives which are both dimensional stability and cost-down. The dimension of the part is crucial because the tray should carry a DVD correctly, but the part is too thin to injection-mold easily. In order to improve the moldability, the mold is designed in the form of stack mold which is a kind of 4 hot runner system. In first, we changed the stack-mold system with one hot-runner to cost down, and decided the optimal position of the gate. After that, we investigate the effect of both the layout of cooling channels and the cooling temperature on the shrinkage of the DVD tray. A optimal simulation approach, the gate design is 2Gate#3 and the layout is Case2 cooling line as the optimal temperature of $70^{\circ}C$. The Moldflow and PC+ABS are used for the CAE program and material respectively.

• Journal of Forest and Environmental Science
• /
• v.36 no.1
• /
• pp.55-61
• /
• 2020

In this study, basic data with respect to the introduction of Hipphophae rhamnoides L. and its cultivation in Korea could be obtained. According to the size of the plug cell tray, Chinese origin's rate of seed germination was relatively high in 128 plug cell tray, and growth was vibrant in 50 plug cell tray. The germination and growth of Russian origin seeds showed that they were relatively effective in 50 plug cell tray and with respect to soil environment, TKS-2 soil with untreated shading relatively promoted both germination and growth for Chinese origin, the rate of germination was high in bed soil for horticulture and growth result was good in TKS-2 in the case of Russian origin. It was confirmed that the germination rate of Chinese origin H. rahmnoides L. was highest in untreated shading and the shoot growth was vibrant in 70% shading while the growth in roots was vibrant in the untreated shading. In the Russian origin, H. rhamnoides L. the germination rate in 30% and 70% shading was about 50% which was higher than that in the untreated shading and general growth was vibrant in 30% shading.

• Journal of the Korean Society of Costume
• /
• v.6
• /
• pp.105-119
• /
• 1982

This thesis is mainly about the changes of Garment's collar(옷깃) and outer collar (옷섶) which indicate the identification of dress history. Through the observations of some reports about important folk materials and genuine objects, the author has investigated and rearranged them focusing on Yi-Dynasty. (1400-1900) For the shape of the outer lapels(겉깃) of Korean Jacket(저고리) were used together Squar-Tray-Collar(목판깃), Sharped-Collar(칼깃), and Dang ko-Collar(당코깃) and coming to the end of inner lapels(안깃) formed squar-tray-collar. Squar-tray-collar and sharped-collar were mainly used together for the shape of the outer lapels of Korean overcoat(포). Dang ko-collar was seen only in two overcoat. Coming to the 18th centry, the outer lapels became round-edged like those of jackets, while the inner lapels formed squar-tray-collar. In the process of positional changes of the collar and outer collar of Korean jacket and overcoat, the outer lapels positioned outside the outer collar, or a part of width of collar's positioned upon the outer collar, or the whole outer lapels positioned inside the outer collar. And through these changes the current position of the outer lapels became settled in the end of the 19th centry. But the inner lapels did not undergo many changes compared with the outer ones, and their position was mainly outside the outer collar like those of current lapels. And the garment's collar and outer collar of jacket and overcoat became small while the width and length of breast-tie(고름) became large.

• Radiation Oncology Journal
• /
• v.7 no.2
• /
• pp.293-297
• /
• 1989

Electron contamination due to the interaction between radiation beam and material was analyzed for the factors such as source-skin distance (SSD), field size, tray characteristics and position of filter, which can affect the surface dose in Cobalt teletherapy. Surface dose in open beam was more influenced by SSD with increasing field size. Relative surface charge (RSC) increased with the use of tray (solid, circular hole, slotted), compared with open beam, which is thought to be due to increased electron contamination of the tray. To reduce the surface dose, 0.4mm thick Lipowitz metal filter was used. Compared with open beam, RSC decreased by 8.8%, 11.3%, 13.3%, 16.6%, 19.3% and 21.7% for the field size of $5{\times}5$, $10{\times}10$, $15{\times}15$, $20{\times}20$, $25{\times}25$ and $30{\times}30cm^2$, respectively. On the contrary, use of Lipowitz metal filter increased RSC at 60cm or less SSD. Surface dose was effectively reduced with Lpowitz metal filter placed right below solid tray in Cobalt teletherapy.