• Journal of Navigation and Port Research
• /
• v.40 no.2
• /
• pp.51-56
• /
• 2016

Expressways mean the primary arterial highways with a high level of efficiency and safety. However, Gyeongbu and Namhae expressways connected with Busan ports are showing travel time delay by increased traffic including the medium/large-sized vehicles of about 20% compared to those of about 13% regardless of the peak periods. This study, thus, intends to analyze lane traffic characteristics in the basic 8-lane segments of the above-mentioned expressways, compute the planning and buffer times based on travel time reliability, find the lane speed showing a higher correlation with planning time between the lane speeds in the basic 8-lane segments, and finally suggest a correlation model for predicting the planning time in expressways.

• Journal of Welding and Joining
• /
• v.7 no.4
• /
• pp.12-21
• /
• 1989

Laser beam welding parameters have experimentally investigated, using a continuous wave 3kW $CO_2$ laser with the various travel speeds, beam mode and laser beam power in low carbon steels. An optimum position of focus and the effect of shielding gas on penetration depth with varying the flow range of 0.5 to 5.1m/min have been combined to investigate the effect of laser power and travel speed on penetration depth and bead width. It is found that the optimum position of focus in 3kW class laser is 0.5 to 1.5mm below the surface of the material. The flow rate of shielding gas affects the penetration depth and He is more effective than Ar. The penetration depth in laser welds of low carbon steels is between two and four times of the bead width. Laser beam welding of butt joints in 2mm thick carbon steel has been carried out to establish a weldability lobe. The lobe indicating acceptable welding conditions is introduced.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.209-230
• /
• 2007

This paper analyzed the social cost function of a congestion-prone service system, which is developed from the social cost minimization problem. The analysis focused on the following two issues that have not been explicitly explored in the previous studies: the effect of the heterogeneity of value-of-travel-times among customers on the structure of cost functions; and the structure of the supplier cost function constituting the social cost function. The analysis gave a number of findings that could be summarized as follows. First, the social marginal cost for one unit increase in system output having a certain value-of-travel-time is the sum of the service time cost for that value-of-travel-time and the marginal congestion cost for the average value-of-service-time of all the system outputs. Second, the marginal congestion cost equals the marginal supplier cost of system output under the condition that supplier compensates the customers for the changed service time costs which is incurred by the marginal capacity increase necessary for economically facilitating an additional system output. Third, the compensated marginal cost is the multiple of the marginal capacity cost and the inverse of system utilization ratio, if the service time function is homogeneous of degree zero in its inputs.

• Geophysics and Geophysical Exploration
• /
• v.20 no.1
• /
• pp.18-24
• /
• 2017

We performed seismic imaging based on relative S-wave travel times to examine S-wave velocity of upper mantle structure beneath East Asia. We used teleseismic events recorded at 129 broadband stations of the Korea Institute of Geoscience and Mineral Resources (KIGAM), Korea Meteorological Administration (KMA), and National Research Institute for Earth Science and Disaster Prevention (NIED). Relative travel time residuals were obtained by a multi-channel cross-correlation method designed to automatically determine accurate relative phase arrival times. The resulting images show high-velocity anomalies along plate boundaries around the Japanese islands region. These anomalies may indicate subducting Pacific and Philippine Sea plates. On the other hand, a low-velocity anomaly is revealed beneath east of the Korean peninsula down to around 300 km depth, which is thought to be related to the formation of the Ulleung basin and the Ulleung island. Low-velocity anomalies revealed beneath the Jeju island may imply that the formation and volcanism of the Jeju island have been caused by magmatic sources from the deep mantle.

• Geophysics and Geophysical Exploration
• /
• v.14 no.2
• /
• pp.140-145
• /
• 2011

In order to analyze the influence of the noise on a cross-well traveltime tomography to detect a small scale low velocity body in a homogeneous medium, the first arrival travel times were computed one a tunnel model by a finite-difference ray tracing scheme. Three different types and four different intensity levels of white noises were added to the computed first arrival travel times, and velocity tomograms were constructed using an iterative inversion method (SIRT). Tomograms with the noise intensity up to 10% of the maximum traveltime delay in the tunnel model, showed the exact location of the tunnel. However, the velocity shown at the tunnel location was not close to air velocity but only slightly less than the velocity of the background medium. The additive random noise showed significantly less degree of influence on the resulting tomogram than the source- and receiver consistent noise.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.233-237
• /
• 2006

3D travel time tomography was conducted to characterize the subsuface structure in the valley area. In this study, an area($200m{\times}200m$), where borehole informations were available to aid in the interpretation, was covered with wide source/receiver coverage. In data acquisition, both hole to hole and reverse VSP array was employed. For the inversion, 3D seismic traveltime tomography algorithm based on Fresnel volume was implemented. When compared 3D velocity cube with the geological survey and drilling logs, both results were matched well. From this, we concluded that 3D seismic travel time tomography has enough potential to the field application.

• International Journal of Highway Engineering
• /
• v.18 no.2
• /
• pp.91-101
• /
• 2016

PURPOSES : The aim of this study was to compare the performance of the QUEENSOD method and the gravity model in estimating Origin-Destination (O/D) tables for a large-sized microscopic traffic simulation network. METHODS : In this study, an expressway network was simulated using the microscopic traffic simulation model, VISSIM. The gravity model and QUEENSOD method were used to estimate the O/D pairs between internal and between external zones. RESULTS: After obtaining estimations of the O/D table by using both the gravity model and the QUEENSOD method, the value of the root mean square error (RMSE) for O/D pairs between internal zones were compared. For the gravity model and the QUEENSOD method, the RMSE obtained were 386.0 and 241.2, respectively. The O/D tables estimated using both methods were then entered into the VISSIM networks and calibrated with measured travel time. The resulting estimated travel times were then compared. For the gravity model and the QUEENSOD method, the estimated travel times showed 1.16% and 0.45% deviation from the surveyed travel time, respectively. CONCLUSIONS : In building a large-sized microscopic traffic simulation network, an O/D matrix is essential in order to produce reliable analysis results. When link counts from diverse ITS facilities are available, the QUEENSOD method outperforms the gravity model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1D
• /
• pp.119-127
• /
• 2008

Nowaday, the local governments eager to change their transport system aiming for public transport oriented one. However, it is more important to change the land use system in the catchment areas of public transport in order to enhance its usage sustainably for the long run. This research aims to seek maximal spatial extent of the catchment areas of the Seoul Metropolitan Subway in consideration of its urban spatial structure in order to accommodate the potential users living around the subway stations. For this task the empirical data of the household travel survey for the Seoul Metropolitan Area conducted 2002 were analysed. It was founded that the walking access times to the subway stations, which can represent their spatial extents, are related to their travel times, but differently according to their given positions in the urban spatial structure. The characteristics of subway commuters also affect them with the conditions. It is to be expected that the results of this research can contribute to an enhancement of its usage by applying to land-use policies of the catchment areas.

• 한국ITS학회:학술대회논문집
• /
• 2004.11a
• /
• pp.264-269
• /
• 2004

• Journal of Korean Historical Folklife
• /
• no.26
• /
• pp.71-106
• /
• 2008

The objective of this research is to reconstruct an aristocratic officer's travels by analysing Yu, hee-chun's diary, Miamilgi. Yu had kept his diary for eighty three months, from October 1567 to May 1577, and there were twenty six times of travel logs which are analysed in this research. As a result of the analysis, his travels can be divided into official travels and private travels. Sixteen times of official travels were comprised of inspection tours for parishes as a superintendent of Jeonra province, trips to supervise maintenance works of royal tombs and to worship the tombs, to carry out the sanjae (rituals in the mountains) as a second minister of the ministry of rites. It was difficult for him to have private travels as he continually served as a royal officer. He had got only 10 times of private travels during the eighty three months for maintaining the ancestor's tomb and worshiping the ancestors, for recuperating himself and his wife, and for constructing his new house. All of these travels were long-distance ones. In terms of his travel routes, he frequently used royal main trunks, e.g. 'Haenamro' (from Seoul to Damyang), which were maintained by the royal government. The main reason of his frequent using of trunk lines was that convenience facilities such as the royal post stations (Yeok) and royal inns (Won) were equipped well in these roads so it was easy to get horse change services and lodging and boarding. The fact that main trunks were chiefly straight lines and the shortest way was rather secondary reason. On the other hand, when he was a superintendent of Junra province, he had four times of round inspection on all parishes of Junra province, following the tour routs covering all over the province. As he was incumbent royal officer, he started his travel by getting a permission from the king. Simultaneously, he made ready some travel items. Among the items, horse was most important one for the journey. After finishing all the preparing processes before the departure, he had special farewell ceremony for the King, Sookbae, and had a small party with his friends called Jeonbeul. Main transportation means for his travel was horse, and many kinds of horses such as royal government's horse, Yeokma, local government's horse, Swema, as well as his private one were used. Additionally, he used a palanquin while he was doing inspection trip as a superintendent of Junra province. Yu was incumbent officer so he mostly lodged in local government guest houses. If he could not find out any local guest house, he was lodged in royal inn, and in his relatives houses or irregularly in buddhist temples. Most meals were supplied by local royal governments. The activities in his journeys were varied on his travel objectives. In his private journey, it was the main activities that maintaining ancestor's tombs and having a memorial service. During the trip, he visited his relatives. His official trips, on the other hand, had a regularity. Main activities were dealing with public works, and visiting Hyanggyo (country public school). However in the midway, he visited his relatives and had a journey to scenic places.