• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.4
• /
• pp.411-428
• /
• 2022

Given the domestic situation, all nuclear power plants are located at the seaside, where interim storage sites are also likely to be located and maritime transportation is considered inevitable. Currently, Korea does not have an independently developed maritime transportation risk assessment code, and no research has been conducted to evaluate the release rate of radioactive waste from a submerged transportation cask in the sea. Therefore, secure technology is necessary to assess the impact of immersion accidents and establish a regulatory framework to assess, mitigate, and prevent maritime transportation accidents causing serious radiological consequences. The flow rate through a gap in a containment boundary should be calculated to determine the accurate release rate of radionuclides. The fluid flow through the micro-scale gap can be evaluated by combining the flow inside and outside the transportation cask. In this study, detailed computational fluid dynamic and simplified models are constructed to evaluate the internal flow in a transportation cask and to capture the flow and heat transfer around the transportation cask in the sea, respectively. In the future, fluid flow through the gap will be evaluated by coupling the models developed in this study.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.520-525
• /
• 2016

In this paper, Characteristic of power conversion unit of a railway vehicles according to contact loss in feeding system that applied impedance of rigid conductor is analyzed. It applied impedance of rigid bar in modeling of electric railway system. Railway vehicles are performed of modeling based on the performance of the electric railway vehicle. Effects of the contact loss in the power conversion unit were analyzed via main transformer of railway vehicle, the input and output voltage characteristics of the converter through contact loss was generated after linking the vehicle with feeding system.

• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.257-269
• /
• 2024

Purpose: The purpose of this study is to explain the pivotal role of the travel forecasting process in urban transportation planning. This study emphasizes the use of travel forecasting models to anticipate future traffic. Method: This study examines the methodology used in urban travel demand modeling within transportation planning, specifically focusing on the Urban Transportation Modeling System (UTMS). UTMS is designed to predict various aspects of urban transportation, including quantities, temporal patterns, origin-destination pairs, modal preferences, and optimal routes in metropolitan areas. By analyzing UTMS and its operational framework, this research aims to enhance an understanding of contemporary urban travel demand modeling practices and their implications for transportation planning and urban mobility management. Result: The result of this study provides a nuanced understanding of travel dynamics, emphasizing the influence of variables such as average income, household size, and vehicle ownership on travel patterns. Furthermore, the attraction model highlights specific areas of significance, elucidating the role of retail locations, non-retail areas, and other locales in shaping the observed dynamics of transportation. Conclusion: The study methodically addressed urban travel dynamics in a four-ward area, employing a comprehensive modeling approach involving trip generation, attraction, distribution, modal split, and assignment. The findings, such as the prevalence of motorbikes as the primary mode of transportation and the impact of adjusted traffic patterns on reduced travel times, offer valuable insights for urban planners and policymakers in optimizing transportation networks. These insights can inform strategic decisions to enhance efficiency and sustainability in urban mobility planning.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.216-221
• /
• 2017

In this paper, the converter and traction system of 8200 electric locomotive is modeled using matlab simulation module. And the characteristic was analyzed through simulation of the combined system of converter and inverter for controling 8200 electric locomotive. The validity of the simulation was proved through performing unit power factor control of converter and speed control of inverter.

• Journal of the Korean association of regional geographers
• /
• v.2 no.2
• /
• pp.37-47
• /
• 1996

It is well agreed that transportation is not the end by itself, rather it is a means to achieve other goals to enhance the quality of life. Accordingly, various social impacts of transportation systems, such as destruction of community social life of urban residents, separation of community area, and accessibility restriction on the transportation handicapped, which can deteriorate the quality of life of the residents should be considered seriously in the process of urban transportation planning. The urban transportation planning process of Korea which emphasizes too much on the of efficiency objectives of transportation, however, have neglected greatly the social sides of urban transportation systems. This paper discusses major social impacts of urban transportation systems in Korea and proposes several research fields related to the social impacts of urban transportation.

• Architectural research
• /
• v.25 no.4
• /
• pp.61-72
• /
• 2023

The main factors that made Seoul's rapid population accommodation and urbanization possible in the mid-to-late 20th century were the ex-pansion of urban infrastructure, completion of the transportation system, and housing supply. The development of transportation and resi-dential development occurred simultaneously, and in particular, apartment complexes, a representative residential area in Seoul, were most influenced by Perry's neighborhood unit theory. The purpose of this study is to analyze the process of the physical environment of apartment complexes in the metropolitan area in response to development of transportation in the mid-to-late 20th century. The analysis sites are Jamsil Apartment Complex(1974), Dunchon Apartment Complex(1979), Mok-dong New Town(1983), Sanggye New Town(1985), Bundang New-town(1990) and Ilsan Newtown(1990), which were planned at the turning point of development of transportation and actively reflect the neigh-borhood unit theory. The analysis was conducted in three stages. Analyzing the status of transportation when the plan was established, deriv-ing the planning elements, and classifying the planning elements into walking, bus, car, and subway which is the representative transportation. The conclusions from the analysis are as follows. Firstly, completing the legal system and expanding the related infrastructure are essential. Secondly, in contrast to the increase in traffic volume, the pedestrian environment has been continuously improved. Thirdly, despite the emergence of new mode of transportation, there was a tendency to activate the linkage between transportation.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1558-1566
• /
• 2010

After the establishment of 'Staggers' Rail Legislation' in 1980, which established an atmosphere of free competition in rail freight transportation market, freight railway in America became larger and the proportion of freight railway in the market increased. In 2008, it took up 43% of the transportation market based on tonne/mile unit and the productivity of freight rail increased. On the other hand, in the case of Korea, the competing atmosphere is being set up under the influences of the renovation of the rail transportation industry in 2004. However, to make the rail transportation market more active and become more advanced, a lot of efforts are required to build a stronger foundation of free competition atmosphere. In this paper, we have deducted the political implications on the establishment of strengthened competition in Korean rail transportation industry from reviewing what kind of changes the rail transportation market in America went through and how it was developed. In this case, we have focused on the changes in industrial trend towards the restriction policy. Also influences of the deregulation policy after 1980 on the enhanced market efficiency were reviews.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.233-243
• /
• 2008

Recognition for the importance and roles of public transportation is increasing because of traffic problems in many cities. In spite of this paradigm change, previous researches related with public transportation trip assignment have limits in some aspects. Especially, in case of multimodal public transportation networks, many characters should be considered such as transfers. operational time schedules, waiting time and travel cost. After metropolitan integrated transfer discount system was carried out, transfer trips are increasing among traffic modes and this takes the variation of users' route choices. Moreover, the advent of high-technology public transportation card called smart card, public transportation users' travel information can be recorded automatically and this gives many researchers new analytical methodology for multimodal public transportation networks. In this paper, it is suggested that the methodology for establishment of brand new multimodal public transportation networks based on computer programming methods using transportation card data. First, we propose the building method of integrated transportation networks based on bus and urban railroad stations in order to make full use of travel information from transportation card data. Second, it is offered how to connect the broken transfer links by computer-based programming techniques. This is very helpful to solve the transfer problems that existing transportation networks have. Lastly, we give the methodology for users' paths finding and network establishment among multi-modes in multimodal public transportation networks. By using proposed methodology in this research, it becomes easy to build multimodal public transportation networks with existing bus and urban railroad station coordinates. Also, without extra works including transfer links connection, it is possible to make large-scaled multimodal public transportation networks. In the end, this study can contribute to solve users' paths finding problem among multi-modes which is regarded as an unsolved issue in existing transportation networks.

• Journal of Korean Society of Transportation
• /
• v.5 no.2
• /
• pp.37-54
• /
• 1987

The methods of the transportation plan evaluation have appearently been improved. Yet we are frequently confronted with many problems when we are trying to apply those various methods in practice. This paper aims at reviewing the major problems in the transportation plan evaluation and considering the way to resolve such kinds of problem. The selection of the evaluation criteria and the weighting systems between such criteria are the moat important things in the multi-criteria approaches. In this respect, this paper suggests some alternative evaluation criteria in consideration of the levels and the purpose of the plan. Also the increased capacities and new demands of generated trip are the main effects of the transportation investment. Nevertheless such significant effects have been neglected in the calculation of benefits due to the transportation investment in the past. Therefore this paper suggests that the surplus capacities and new demands of generated trip according to the alternative investment plans should be included in the calculation of benefits for the plan evaluation.

• Journal of the Korean Society of Systems Engineering
• /
• v.5 no.2
• /
• pp.17-26
• /
• 2009

This paper is about that case study of the Tube Transportation System that the new transportation system offering passenger and logistic service in a metropolis having plenty of the floating population or between medium-sized cities, and solving large issues like terrible traffic jams and environmental problems etc. in this region. Also it presented that elicitation results of performance parameter and the categorization system of it applying a systematic analysis methodology. By the medium of this paper, It showed that definition, case study, performance parameters, and the categorization system of parameters of a general tube transportation system before developing requirements of a specific tube transportation system. From now on, it will come in pretty handy in systems engineering of activities to establish a concept of a new tube transportation systems and develop requirements.