• Journal of the Korean Institute of Navigation
• /
• v.9 no.2
• /
• pp.27-41
• /
• 1985

The transportation productivity is the throughput of utility per locations of resources and is able to be brought forth by using transportation mode. Therefore, Oil energy is necessary for using the transportation mode that is mainly consisted of four parts trucks, railroad, ship and aircraft, and Oil quantity used for such modes is not respectively same. Noticing Such a Point, the purpsoe of this paper is to reaserch the transportation mode of convertable cargoes and to minimize energy consumption quantity by adopting such a mode. We must ttend to Energy-Intensity, Transportation, Distance and cargo quantity for selecting the transport mode to energy consumption and the minimization of transportation energy consumption is concluded in the next LP Problem. As above mentioned, we can find the solution of Xij by the LP when Xij is transportation cargo per routes, and fullfil the minimization of Energy Consumption.

• Korean Management Science Review
• /
• v.13 no.1
• /
• pp.47-55
• /
• 1996

Rapid globalization of production and marketing functions makes choice of international transportation mode of great importance. In this paper, transportation mode is characterized by two factors, mean and variability of transportation lead time. We developed a simple mathematical model to estimate the relative impact of mean lead time, lead time variance and demand variance on the required average inventory level under specified service rates.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.1
• /
• pp.27-33
• /
• 2016

A pulse-width modulation (PWM) method for common mode noise reduction in a PWM inverter connected to a single-phase grid is proposed in this study. The extensively used conventional switching method may experience common mode voltage problems, which generate current leakage and electromagnetic induction problems. In the proposed switching method, the neutral point of the output voltage is always fixed at both ends of the input voltage to reduce common mode noise. The validity of the proposed method is proven through simulation and experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.4
• /
• pp.356-366
• /
• 2022

This paper presents a mode transition method that applies frequency compensation technique of an LLC resonant converter for stable mode transition. LLC resonant converters used in various applications require high efficiency and high power density. However, because of circuit property, a wider voltage gain range equates to a greater circuit loss, so maintaining high efficiency at all voltage gain ranges is difficult. In this case, full bridge-half bridge mode transition method can be used, which maintains high efficiency even in a wide voltage gain range. However, this method causes damage to the circuit through overcurrent by the mode transition. This study analyzes the cause of the problem and proposes a mode transition method that applies frequency compensation technique to solve the problem. The proposed method verifies the stable transition through simulation analysis and experimental results.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.13 no.1
• /
• pp.47-47
• /
• 1988

Rapid globalization of production and marketing functions makes choice of international transportation mode of great importance. In this paper, transportation mode is characterized by two factors, mean and variability of transportation lead time. We developed a simple mathematical model to estimate the relative impact of mean lead time, lead time variance and demand variance on the required average inventory level under specified service rates.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.311-312
• /
• 2015

본 논문에서는 Unipolar PWM 스위칭 (Totem pole) 방법을 사용하는 단상인버터에서 나타나는 common mode noise를 저감시키는 스위칭 방법을 제안한다. 제안하는 방법은 출력전압의 중성점(N)을 입력전압 양단에 항상 고정하도록 스위칭을 하여 Common Mode Noise를 저감했다. 이를 Matlab Simulink를 사용한 모의해석과 실험을 통하여 Noise의 원인과 효과를 입증하였다.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.29-30
• /
• 2015

본 논문에서는 3레벨 인버터의 common mode voltage 변동을 줄여주는 스위칭 방식인 MVPWM(Medium Vector PWM)을 비엔나 정류기에 적용하는 방식을 제안한다. MVPWM은 3개의 상의 reference중의 중간 값일 때의 스위칭 신호를 medium vector가 되도록 바꿔서 3개의 상의 합이 0이 될 수 있게 만들어주므로 인해 common mode voltage변동이 저감된다. 이를 PSIM을 사용하여 모의해석과 실험을 통해 효과를 입증하였다.

• Journal of Korean Society of Transportation
• /
• v.11 no.2
• /
• pp.5-26
• /
• 1993

In order to analyze travel mode choice behavior, behavioral models including logit model, based on revealed preference theory, have been using easily measurable variables such as individual socioeconomic characteristics and physical attributes of travel modes. But some recent attitudinal models of travel choice behavior have implied that the negligence of individual psychological variables and individual choice constraints in travel mode choice might preclude better prediction of individual travel mode choice behavior. In this context, this study was attempted to reconstruct an attitudinal model(AM), especially focused on the decision rules in travel mode choice decision making process, consistent with the conceptual framework relating individual attitude and choice constraints to choice behavior. And to evaluate the strengths of the AM to other comparative models(logit, linear-additive, conjunctive, lexicographic model) in predicting travel mode choice bebavior, an empirical study of the mode choice in work-trip to CBD in Seoul was performed. According to the results the percent of correct prediction(PCP) derived from the AM was higher than those derived from comparative models by at least 7 to 20% in predicting travel mode choice. But each model produced a different prediction accuracy depending on market segmentation by travel modal users, individual socioeconomic characteristics, transportation system characteristics, and satisfaction levels. The finding that different groups divided by a certain criterion employ different decision rules supports the necessity of developing a choice model such as the AM combining compensatory and noncompensatory decision rules, and suggests that a proposed transportation system management plan or policy may have different effects on each group.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.1-10
• /
• 2016

OBJECTIVES : Currently, the market for carbon emissions trading has been increasing. In Korea, it is known that traffic mode rate in bike transportation is low. However, if bike transportation system is encouraged and the traffic mode rate is increased, it would be possible to reduce carbon emissions through the trading market. In this study, a practical policy to activate the bike transportation system in Korea will be proposed and verified. METHODS : Past studies regarding bike transportation system in international and domestic metropolitan cities were analyzed. Moreover, detailed reviews on recent carbon emissions trading market were performed. In particular, SWOT analysis on the bike transportation system in Korea and policy topology analysis were conducted. RESULTS : Based on the literature reviews and SWOT analysis, a new bike transportation policy was proposed. Several actual plans to adopt in Korea were proposed. In addition, a new bike transportation policy was analyzed using policy typology model, and a business model related to the cost of implementing the system and CERs were also proposed. CONCLUSIONS : It is concluded that the proposed bike transportation activation policy and several practical plans to connect CERs and a business model including bus, subway, T-money and bike riders to give some incentive were effective and reasonable. It is desired that this study will help Korea to get CERs through bike transportation activation in the future.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.2
• /
• pp.134-137
• /
• 2019

A wide-bandwidth current controller is required for fast charging/discharging of super capacitor applications. Peak current mode is generally used to accomplish fast charging/discharging because this mode has fast response characteristics. However, the peak current mode control must have a slope compensation function to restrain sub-harmonics oscillation. The slope must be changed accordingly if the controlled output voltage is varied. However, changing the slope for every changed output voltage is not easy. The other solution, selecting the slope as the maximum value, causes a slow response problem to occur. Therefore, we propose a hybrid mode controller that uses a peak current and a newly specified valley current. Through the proposed hybrid mode control, the sub-harmonic oscillation does not occur when the duty is larger than 0.5 because of the fast response.