• Korean Journal of Microbiology
• /
• v.47 no.4
• /
• pp.295-301
• /
• 2011

Aquaporin is a water channel protein, which is classified as Major Intrinsic Protein (MIP), found in almost all organisms from bacteria to human. To date, more than 200 members of this family were identified. There are two major categories of MIP channels, orthodox aquaporins and aquaglyceroporins, which facilitate the diffusion across biological membranes of water or glycerol and other uncharged compounds, respectively. The full genome sequencing of various fungal species revealed 3 to 5 aquaporins in their genome. Although some functions of aquaporins found in yeast were characterized, however, no functional characteristics were studied so far in filamentous fungi, including Aspergillus sp. In this study, one orthodox aquaporin homolog gene, aqpA, and four aquaglyceroporin homologs, aqpB-E, in a model filamentous fungus Aspergillus nidulans were identified and the function of the aqpA gene was characterized. Knock-out of the aqpA gene didn't show any obvious phenotypic change under the osmotic stress, indicating that the function of the gene does not involved in the osmotic stress response or the function could be redundant. However, the mutant showed antifungal susceptibility resistance phenotype, suggesting that the function of the aqpA gene could be involved in sensing the antifungal substances rather than the osmotic stress response.

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.279-287
• /
• 2018

Flight tests for aircraft development and certification have higher air accidents risk than other aerospace industries. Accordingly risk identification necessary for risk management in the safety management system is a very important factor in preventing similar air accidents during flight tests. But internationally issued accident statistics are usually confined to commercial transport aircraft and they do not reflect characteristics of flight tests, also databases to hazards identification during flight tests are not established or available in Republic of Korea. Therefore, we identified flight test procedures and traced the major causes of aviation accidents based on the statistics and preventive materials for risk management which were issued by international organizations and advanced countries of aviation. A total of 312 final reports classified as flight test among air accident/incident database held by U.S. NTSB were researched and about 200 flight test hazard were identified. The results of this study will be used as basic data for establishing the safety management system of the national comprehensive flight performance test site.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.1
• /
• pp.90-104
• /
• 2015

The purpose of this paper is to build a spatio-temporal evapotranspiration(ET) estimation model using Terra MODIS satellite image and by calibrating with the flux tower ET data from watershed. The fundamentals of spatial ET model, Surface Energy Balance Algorithm for Land(SEBAL) was adopted and modified to estimate the daily ET of Yongdam Dam watershed in South Korea. The daily Normalized Distribution Vegetation Index(NDVI), Albedo, and Land Surface Temperature(LST) from MODIS and the ground measured wind speed and solar radiation data were prepared for 2 years(2012-2013). The SEBAL was calibrated with the forest ET measured by Deokyusan flux tower in the study watershed. Among the model parameters, the important parameters were surface albedo, NDVI and surface roughness in order for momentum transport during calculation of sensible heat flux. As a result of the final calibration, the monthly averaged albedo and NDVI were used because the daily values showed big deviation with unrealistic change. The determination coefficient($R^2$) between SEBAL and flux data was 0.45. The spatial ET reflected the geographical characteristics showing the ET of lowland areas was higher than the highland ET.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.4
• /
• pp.51-70
• /
• 2013

The characteristics of deposits formed by the Daejon-cheon and Soobuk-cheon, dissecting the mountains such as Byungpung Mt. and Samin Mt. in western part of Damyang county, Jeonmam province. Results from field survey and bore hole logging by KIGAM are used in interpreting depositional environment, in this study. By the result of deposits near of the channels Daejon-cheon and Soobuk-cheon, and main channel of Youngsan River, the depth of sediment layers in this area is 4~7m, far thinner than formerly estimated. Weathered material of local rocks forms the base of the sedimentary layers. It can be assumed that the location channel of the Youngsan river has been stable ever since the start of the sedimentary events. Sediment particles of tributaries are angular than those of Youngsan River. Particles are larger and sorting is poor. It is interpreted as mount flash flood deposits. Main sources of sediments at the valley bottom or deposition dominated area are the terrace deposits or slope deposits over the gentle foot-slope or front of surrounding mountains. Some particles show polygonal cracking on the surface originated from the strong chemical weathering, while most of these has high angularity. It means various geomorphic processes operate to produce and transport the particles in this area.Isolated hills within the sedimentary plains are made with weathered materials of local bedrock. In the case of foot-slope of the hills, thin sedimentary layers are found. So it can be concluded that surface features of deposition zone of the Daejon-cheon and Soobuk-cheon is formed by the filling of lower part of the valley and its feature partly controlled by the relief of the weathering front.

• Journal of Korea Port Economic Association
• /
• v.34 no.3
• /
• pp.93-112
• /
• 2018

The purpose of this study is to analyze the flow of e-commerce freight transported by maritime transportation for China and to identify the characteristics of cargo by region/item for finding the ways to promote e-commerce export to China. Thus, this study analyzed the e-commerce export and import data on cargo moved via maritime transportation between Korea and China from 2015 to 1Q18, using Origin-Destination(OD) analysis and visualization techniques. The results indicated that the largest number of Chinese e-commerce cargoes were imported at Incheon Port, which has a clearance facility for e-commerce cargo. In the case of Pyeongtaek Port, e-commerce cargo imported from China has transported to Incheon Customs again, causing the inefficiency through the customs clearance process. Unlike the case of e-commerce imports where the final destination is distributed nationwide, e-commerce products exported to China through maritime transportation were found to be mainly confined to Seoul and Gyeonggi provinces, where freight forwarding companies and forwarders are concentrated. In addition, unlike e-commerce import cargoes, e-commerce items exported through maritime transportation were mainly confined to clothing and cosmetics, and export volume was also less than imports. This study provides some possible strategies to increase the volume of freight and to attract export products as follows: i) to diversify products exported to China through e-commerce transshipment, ii) to diversify export items by building the cold chain in e-commerce transport with China.

• Economic and Environmental Geology
• /
• v.54 no.5
• /
• pp.515-533
• /
• 2021

Based on the supply location, demand location, and transportation network, aggregate supply-demand characteristics and aggregate distribution status were analyzed from the results of the closest distance, service areas, and location-allocation scenarios using GIS network analysis. As a result, it was found that the average transport distance of aggregates from the supplier was 6 km on average, the average range of 7 km for sand, and 10 km for gravel was found to reach the destination. In particular, the simulated service area covers about 92% in Seoul-Gyeonggi Province, 85% in Busan-Ulsan-Gyeongnam Province, and more than 90% in Daejeon-Sejong-Chungnam Province. These results have a significant implication in quantitatively interpreting primary data on aggregate supply-demand. Furthermore, these results suggest the possibility of a wide-area quantitative analysis of aggregate supply regions necessary for establishing a basic aggregate plan. The results also evaluated by the site-allocation scenario show that aggregate supply may be possible through companies less than 200 with large-amounts quarries, which is the 700 companies currently supplying small amounts of aggregates on the country. Therefore, in terms of distribution of aggregates, a policy approach is needed to form an appropriate market for regions with high and low density of aggregate supply services, and the necessity of regional distribution and re-evaluation is suggested through an aggregate supply analysis demand across the country. Furthermore, in analyzing the supply-demand network for the aggregate market, additional research is needed to establish long-term policies for the aggregate industry and related industries.

• Journal of Korea Trade
• /
• v.25 no.8
• /
• pp.57-74
• /
• 2021

Purpose - This study aims to analyze the characteristics of network construction by Norwegian Air and AirAsia X, which are recognized as leading airlines in the long-haul LCC market. Based on this analysis, this study intends to provide implications for networking strategies for Korean LCCs that seek to enter the long-haul market when the aviation market stabilizes again upon the end of the COVID-19 pandemic. Design/methodology - To conduct the network analysis on long-haul low-cost airlines, the Official Airline Guide (OAG) Schedule Analyzer was used to extract long-haul data of Norwegian Air and AirAsia X. To analyze the trend of the long-haul route network, we obtained the data from 3 separate years between 2011 and 2019. The network was analyzed using UCINET 6.0 in order to examine the network structure of long-haul low-cost airlines and the growth trend of each stage. Findings - Analyzing the network of long-haul routes by visualizing the network structure of low-cost carriers showed the following results. In its early years, Norwegian Air's long-haul route network, centering on regional airports in Spain and Sweden, connected European regions, the Middle East, and Africa. As time passed, however, the network expanded and became steadily strong as the airline connected airports in other European countries to North America and Asia. In addition, in 2011, AirAsia X showed links to parts of Europe, such as London and Paris, the Middle East and India, and Australia and Northeast Asia, centering on the Kuala Lumpur Airport. Although the routes in Europe were suspended, the network continued to expand while concentrating on routes of less than approximately 7,000 km. It was found that instead of giving up on ultra-long-haul routes such as Europe, the network was further expanded in Northeast Asia, such as the routes in Korea and Japan centering on China. Originality/value - Until the COVID-19 pandemic broke out, Norwegian Air actively expanded long-haul routes, resulting in the number of long-haul routes quintupling since 2011. The unfortunate circumstance, wherein the world aviation market was rendered stagnant due to the outbreak of COVID-19, hit Norwegian Air harder than any other low-cost carriers. However, in the case of AirAsia X, it was found that it did not suffer as much damage as Norwegian Air because it initially withdrew from unprofitable routes over 7,000 km and grew by gradually increasing profitable destinations over shorter distances. When the COVID-19 pandemic ends and the aviation market stabilizes, low-cost carriers around the world, including Korea, that enter the long-haul route market will need to employ strategies to analyze the marketability of potential routes and to launch the routes that yield the highest profits without being bound by distance. For stable growth, it is necessary to take a conservative stance; first, by reviewing the business feasibility of the operating a small number of highly profitable routes, and second, by gradually expanding these routes.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.2
• /
• pp.105-112
• /
• 2019

As the Construction Technology Promotion Act was revised in 2015, the term of Supervision was removed and Construction Management was included instead. The consideration of Construction Management shall be based on the cost plus fee method specified in the Criteria for the Cost of Construction Technology Services of the Ministry of Land, Infrastructure and Transport. Nevertheless, it is based on the construction cost ratio in accordance with the Economy and Finance Ministry's Detailed Guidelines for Preparing the 2018 Budget Plan and Fund Management Plan (Manual for Business Type and Item). As a result, it has been expected that Construction Management consideration will be calculated according to a single government standard and that the Criteria will be applied reasonably. In addition, although the change in the Labor Standard Act has a significant effect on the working environment of the construction site, the nature of the construction site is not considered in this Act. Based on these problems, the study suggested that the government should apply a single standard after consultation with the relevant agencies when calculating the consideration for Construction management, that the scope of the Criteria for the Cost of Construction Technology Services should be clear, that the amount of input by the Construction Manager should be considered for the capability of engineers and the number of working days, and that construction characteristics should be considered when determining the number of working days and hours.

• Journal of Convergence for Information Technology
• /
• v.9 no.9
• /
• pp.13-19
• /
• 2019

This paper analyzed the SCMS and pilot policy, which is pursued by the U.S. government in connected vehicles. SCMS ensures authentication, integrity, privacy and interoperability. The SCMS Support Committee of U.S. government has established the National Unit SCMS and is responsible for system-wide control. Of course, it introduces security policy, procedures and training programs making. In this paper, the need for SCMS to be applied to C-ITS was discussed. The structure of the SCMS was analyzed and the U.S. government's filot policy for connected vehicles was discussed. The discussion of the need for SCMS highlighted the importance of the role and responsibilities of SCMS between vehicles and vehicles. The security certificate management system looked at the structure and analyzed the type of certificate used in the vehicle or road side unit (RSU). The functions and characteristics of the certificates were reviewed. In addition, the functions of basic safety messages were analyzed with consideration of the detection and warning functions of abnormal behavior in SCMS. Finally, the status of the pilot project for connected vehicles currently being pursued by the U.S. government was analyzed. In addition to the environment used for the test, the relevant messages were also discussed. We also looked at some of the issues that arise in the course of the pilot project.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.651-660
• /
• 2021

This study examined the trend of standards established in the United States and to find points that can be applied to Korean defense standards. The titles of various United States defense standard documents registered on the web were selected for this research. The wordcloud was created after analyzing the frequency of words appearing in the title using text mining. The trend of words appearing in MIL-STD by era was obtained. This study identified words that appear often due to the format of the document itself, words that appear regularly throughout the era, words that are used frequently in the past but are not used much in the present, and words that did not receive attention in the past but appeared recurrently in the present. In addition, the characteristics of each document were derived through the wordcloud produced for various defense documents. In conclusion, Korean defense standards also require a consideration of safe and efficient management, transport, and load design of hazardous materials. Furthermore, the quality of defense standards can be expected to improve if the defense standard document system can be established, focusing on efficient management.