• 한국산업보건학회지
• /
• 제22권1호
• /
• pp.32-41
• /
• 2012

Objectives: Information of chemical in electronics industry has not been known enough, although workers' health hazards by chemicals in this industry have been regarded serious. The who always contribute to reveal and control the health hazards and risks in electronics industry have not been the industry but the occupational or environmental victims and grassroot organizations. The similar phenomena can be observed in Korea. Methods: The experiences of individual workers on the occuapational safety and health in semiconductor factory were heard separately and integrated with related literatures. Results:: The first part of this article is largely based on the memories and experiences of individual workers of semiconductor factories, mainly from S semiconductor. Common features of those experiences can be a good resource for detail understanding of the workplace, especially under the situation without any transparent disclosure of information by the governments or the companies. The second part of this article deals with several factors to be considered for control of exposure in workplace; characteristics of workplace and workforce, types of chemicals used, and the way of using the chemicals. Then the current social issues on work-relatedness of cancers of S semiconductor workers are presented briefly. Conclusions: As a conclusion, current OSH situations and issues in Korean electronics industry raise the need of changes in OSH culture. General adaptation of precautionary principle, internalization of costs, and extended responsibility of producers are needed urgently. The OSH professionals both in public and private sectors should support these agendas under their social obligation to protect workers' health.

• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.7-10
• /
• 2022

A functional polyethylene terephthalate substrate to increase light extraction efficiency of organic light-emitting diodes is studied. We formed nano-structured PET surfaces by controlling the power, gas, and exposure time of the linear ion-beam. The haze of the polyethylene terephthalate can be controlled from 0.2% to 76.0% by changing the peak-to-valley roughness of nano structure by adjusting the exposure cycle. The treated polyethylene terephthalate shows average haze of 76.0%, average total transmittance of 86.6%. The functional PET increases the current efficiency of organic light-emitting diodes by 47% compared to that of organic light-emitting diode on bare polyethylene terephthalate. In addition to polyethylene terephthalate with light extraction performance, by conducting additional research on the development of functional PET with anti-reflection and barrier performance, it will be possible to develop flexible substrates suitable for organic light-emitting diodes lighting and transparent flexible displays.

• 한국전기전자재료학회논문지
• /
• 제24권5호
• /
• pp.355-358
• /
• 2011

As a II-IV compound semiconductor, ZnO has a wide band gap of 3.37 eV with transparent properties. Due to this transparent properties, ZnO materials can be also employed as the transparent conducting electrode materials. Recently, rapid progress has been made in the field of DSSC (dye sensitized solar cell)area. Therefore, strong demands have been required for the transparent electrodes with low temperature processing and cheap cost. In this paper, we will prepare ZnO thick films on the PET substrates for the electrode applications. We will investigate the structural and microstructure properties through the XRD, and SEM analysis, respectively. Also, we will study the electrical of specimens to apply the conducting electrode.

• 센서학회지
• /
• 제24권4호
• /
• pp.219-223
• /
• 2015

Indium free consisting of three alternating layers GTO/Ag/GTO has been fabricated by radio-frequency (RF) sputtering for the applications as transparent conducting electrodes and the structural, electrical and optical properties of the gallium tin oxide (GTO) films were carefully studied. The gallium tin oxide thin films deposited at room temperature are found to have an amorphous structure. Hall Effect measurements show a strong influence on the conductivity type where it changed from n-type to p-type at $700^{\circ}C$. GTO/Ag/GTO multilayer structured electrode with a few nm of Ag layer embedded is fabricated and show the optical transmittance of 86.48% in the visible range (${\lambda}$ = 380~770 nm) and quite low electrical resistivity of ${\sim}10^{-5}{\Omega}cm$. The resultant power conversion efficiency of 2.60% of the multilayer based OPV (GAG) is lower than that of the reference commercial ITO. GTO/Ag/GTO multilayer is a promising transparent conducting electrode material due to its low resistivity, high transmittance, low temperature deposition and low cost components.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.34-35
• /
• 2006

Transparent ZnO thin film transistor (TFT) is fabricated on the glass substrates. The device consists of a high mobility intrinsic ZnO as a semiconductor active channel, Ga doped ZnO (GZO) as an electrode, $HfO_2$ as a gate insulator. GZO and $HfO_2$ layers are prepared by using a pulsed laser deposition and intrinsic ZnO layers are fabricated by using an rf-magnetron sputtering, respectively. The transparent TFT is highly transparent (> 87 %) and exhibits n-channel, enhancement mode behavior with a field-effect mobility as large as $11.7\;cm^2/Vs$ and a drain current on-to-off ratio of about $10^5$.

• 융합정보논문지
• /
• 제10권9호
• /
• pp.28-34
• /
• 2020

본 논문에서는 투과도가 높은 OHP 필름상에 AZO 반도체 물질을 기반으로 한 광센서를 제작하여 광소자 특성 및 이를 구성하고 있는 반도체 소재의 물성에 대해 설명한다. 최근 전자소자 분야에서 주요 이슈가 되고 있는 플렉서블 광소자를 구현하기 위해서 최초로 투명하고 굽힘성이 있는 OHP 필름을 기판으로 사용하였다. 또한, 투명 전극 및 반도체 물질로 양산에 사용되고 있는 ITO는 인듐의 희소성 때문에 가격이 높다. 따라서 이 물질을 대체할 수 있는 소재를 발굴해야 하며, AZO 소재가 가능성이 있는지 Au/Al/AZO/OHP 필름 구조의 광센서 소자를 구현하여 광학 및 전기적인 특성을 평가하였다. 소자 및 이를 구성하는 소재들은 벤딩(굽힘)에 의한 물성 변화가 없었으며, 이와 같은 결과들은 차세대 소자로의 적용에 대한 가능성을 제공한다. 하지만, 양산을 위해서는 OHP 필름 표면의 미세한 스크래치를 제거해야 하며, 뿐만 아니라 광전류를 향상시킬 수 있는 재료, 구조 기반으로 최적화된 소자를 연구해야 할 것이다.

• 반도체디스플레이기술학회지
• /
• 제14권1호
• /
• pp.55-59
• /
• 2015

This study demonstrates hybrid-type transparent electrodes for touch screen panels. The hybrid-type electrodes were fabricated by coating carbon nanotubes (CNTs) on metal meshes. To form the metal-meshes, thin films of silver (Ag) were deposited on glass substrates using the sputtering method and then patterned via photolithography to obtain mesh structures whose line width was $10{\mu}m$ and line-to-line spacing was $300{\mu}m$. CNTs were coated on Ag-meshes by using two different methods, such as spray coating and electrophoretic deposition (EPD). For the samples of a Ag-meshes and CNTs-coated Ag-meshes, their surface morphologies, electrical sheet resistances, and visible-range transmittances and reflectances were characterized and compared. The experimental results indicated that the reflectance of Ag-mesh electrodes was substantially reduced by coating of CNTs. Especially, the hybrid electrodes of Ag-meshes with EPD-coated CNTs showed excellent properties such as sheet resistance lower than $20{\Omega}/{\Box}$, transmittance higher than 90 %, and reflectance lower than 8%.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권1호
• /
• pp.39-43
• /
• 2016

The structural, electrical properties of Ga doped MgZnO transparent conductive oxide (TCO) films by ratio-frequency(RF) magnetron sputtering were investigated. Ga doped MgZnO TCO films were deposited on the sapphire substrates at $200^{\circ}C$ varying growth thickness 200 to 600 nm. The optical properties of Ga doped MgZnO TCO films were showed above 85% transmittance from 300 to 1000 nm region. In addition, the current density ($J_{SC}$) of $Cu(In,Ga)Se_2$ (CIGS) solar cells was improved by using the MgZnO:Ga films of 500 nm thickness because of outstanding electrical properties. The $Cu(In,Ga)Se_2$ solar cells with MgZnO:Ga transparent conducing layer yielded an efficiency of 9.8% with current density ($31.8mA/cm^2$), open circuit voltage (540.2 V) and fill factor (62.2) under AM 1.5 illumination.

• 반도체디스플레이기술학회지
• /
• 제6권3호
• /
• pp.35-39
• /
• 2007

ITO(Indium Tin Oxide) is the most attractive TCO(Transparent Conducting Oxide) materials for LCD, PDP, OLEDs and solar cell, because of their high optical transparency and electrical conductivity. However due to the shortage of indium resource, hard processing at low temperature, and decrease of optical property during hydrogen plasma treatment, their applications to the display industries are limited. Thus, recently the Al-doped ZnO(AZO) has been studied to substitute ITO. In this study, we have investigated the effect of different substrate temperature(RT, $150^{\circ}C$, $225^{\circ}C$, $300^{\circ}C$) and working pressure(10 mTorr, 20 mTorr, 30 mTorr, 80 mTorr) on the characteristics of AZO(2 wt.% Al, 98 wt.% ZnO) films deposited by RF-magnetron sputtering. We have obtained AZO thin films deposited at low temperature and all the deposited AZO thin films are grown as colunmar. The average transmittance in the visible wavelength region is over 80% for all the films and transmittance improved with increasing substrate temperature. Electrical properties of the AZO films improved with increasing substrate temperature.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.390-392
• /
• 2013

본 논문에서는 투명디스플레이를 구현하기 위해 가장 주목받는 ZnO 계열의 산화물반도체의 특성에 대하여 관찰하였다. 알에프 마그네트론 스퍼터링에 의해 증착된 산화물 반도체의 광학적 특성으로부터 전기적인 신호 동작특성의 상호관계를 알아보았다. 박막내의 결합 혹은 불순물이 증가할수록 PL 특성은 장파장 특성이 우세하게 나타났다. SiOC 박막위에서는 에너지 밴드갭이 증가하면서 단파장 특성이 우세하게 나타났다. 트랜지스터의 특성은 기판의 의존도가 높게 나타났다.