• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.649-657
• /
• 1992

Transmission error for a stepping motor-timing belt drive system is investigated experimentally and analytically. From FFT analysis of the experimental results, it is found that the transmission error consists of three periodic errors : (1) error by the stepping motor per one resolution angle theta.$_{m}$, (2) error by the pulley eccentricity per one revolution theta.$_{e}$, and (3) error by the meshing effect between the belt and the pulley teeth per one pitch revoltion theta.$_{p}$. In order to investigate the effects of some design parameters on the transmission error, the dynamic models of the stepping motor-timing belt drive system are derived by Bondgraph. According to the simulation results, as the belt total tension increases, theta.$_{m}$ and theta.$_{e}$ decrease due to the nonlinearity of the belt. In adition, the numerical and experimental results show that theta.$_{m}$ and theta.$_{e}$ of the loaded case are larger than those of the unloaded case. The analytical results are in good accordance with the experimental results.sults.s.sults.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.2 no.1
• /
• pp.131-139
• /
• 1998

With the rapid development of communication technology and widespread uses of internet service, utilization of internet-based medical information systems which transmitts moving pictures of medical objects is becoming a common practice. The internet-based medical information service prvovides richer information than conventional services such as touch-tone telephone, personal computers e-mails, or pagers, because "a picture is worth a thousand words". However, the systems passively transmits moving pictures of the medical objects to the users, and thus the system cannot intelligently adjust itself to provide better service. As the tradeoff exists between transmission speed and quality of the image, there is a need that moving pictures be analyzed to adjust the trnasmission speed and image quality. When very little difference between consecutive images are detected, the system can automatically increase the size of the image files, thus enhancing the quality of image. In contrast, the system should increase the number of images to send more pictorial information by sacrificing the quality of each individual image, when a significant difference is detected. In this paper an adaptive filtering technique is introduced which adjusts the quality of image and transmission speed according to a clinical situation in hospital.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.5
• /
• pp.1308-1318
• /
• 1997

This paper proposes a new touthind algorithm, the Bandwidth-Delay-Loss based Routing(BDLR) algotithm, which supports the selection of an effcienet routing path by cinsidering the characteristics and QoS requirements of intergarted servies over the Untegrated Serives Packet Network(ISPN), and also compareas it with other touting algorithms by simulating their perfomances on the various combinations of the realtime and non-realtime traffic over the ISPN. The simulation shows that the BDLR algorithm takes great advantages on transmisson dealy, the satisfiability of QoS requirements, and the adapation of traffic envirment over the other routing algorithms priposed for ISPN until now.

• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.23-34
• /
• 2013

This study would verify the validity of two transmission technology, 'Clear QAM' and '8VSB'. 'Clear QAM' and '8VSB', the transmisson technology, have been suggested as the concrete alternatives in the situation that half of subscriber of multi channel tv service have been still out of benefit from digital convert. In this study, we have shown that the introduction of 'Clear QAM' and '8VSB' should ease economical burdens and information minority group without extra set-top box. But there is another concern that it should negatively affect on the contents industry by a devaluation of the multi channel tv service or by an infringement of copyright. In these reasons, it is still difficult to solve the related concern, though the government have to set up the politic goal for the related industry as well digital convert. This study suggested that Korea Communication Commission consider above-mentioned technology temporarily, and reconsider 'Clear QAM' around the completion of the digital convert project.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.691-700
• /
• 1994

A power line in not so good in characteristics for communication, because it is a media to transfer the commercial electrical power, and its load noise and high frequency noise are so much. Thus, a simple method to transfer a remote control signal on the power line is studied. The already-existing method is that two signals with upper part eliminated is transmitted every N step. But the method is investigated which the transmitter sends a period signal eliminated in arbitrary phase. Thus the transmission power loss due to elimination of signal can be reduced to the minimum. To implement it, a timer calculating the time from zero-crossing point to the phase is required. The micro-controller, 87C51, precisely calculates the phase using one of two built-in timers. As a result, a remote control signal tramsmitter and receiver using a partially eliminated signal, which is better than the conventional technique using half-eliminated signal in a efficiency of power transmission, is realized, and its characteristics are analyzed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.2
• /
• pp.153-158
• /
• 2022

A telesounder is a device that can monitor the appearance of fish in the sea on land and store fish detection data. This study was conducted to monitor the appearance of fish resources in coastal or near seas by using LTE communication for data transmission of the telesounder. The purpose of this study was to develop a prototype telesounder that can monitor the appearance of fish groups in the waters about 50 km away from the coast and store fish detection data. In this study, the prototype telesounder including a fish finder, communication device and battery for stable operation at sea was developed. The stability of telesounder buoy, data transmission/reception and expected use time were investigated. The expected use time of the telesounder using LTE communication with a lithium battery (12 V, 120 Ah) was about 274 hours under the conditions of 10 minutes off and 10 minutes on, about 520 hours under the conditions of 30 minutes off and 10 minutes on, and about 142 hours under continuous conditions. As a result of the sea test, it was found that the telesounder can be used in the sea area moved about 34 km from the land and the telesounder buoy was evaluated to have secured basic stability (buoyancy balance, waterproof, antenna strength, etc.) for operation in a marine environment.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.11
• /
• pp.27-35
• /
• 1995

The fluid coupling combined with a pump and a turbine have many merits compared with other couplings, their uses are increesing rapidly in various industrial fields at home and abroad in pursuit of high-speed more efficiency durability of various mechanic devices. The authorities concerned have recognized the improtance of the fluid coupling and supported its developement and now some trial products began to show up. As the structrue and characteristics of the fluid coupling have little similarity to other kinds of couplings and its fluid behavior is unique, so its characteristic analysis is expected to be difficult. Until now no satisfactory study on the characteristics of the fluid coupling seems to have been conducted at home, so a study on this field needs to be done urgently. The purpose of this research is to construct the experimental test set-ups and establish a series of performance test program for the domestically developed fluid couplings and to provide a software to store and utilize these experimental data which can be used to improve the performance of the fluid coupling and solve on the job problems confronted in operation. The performance test consists of taking measurment of torque, rpm and efficiency of the fluid coupling for three different amount of working fluid inside with various loads to the output shaft and finally infestigating the torque, rpm and efficiency characteristics of the fluid coupling with respect to these parameters. The results of this study can contribute valuable references to the development of variable speed fluid coupling and torque converter currently pursued by the domestic industry.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.421-421
• /
• 2006

The light and energy-efficiency of classical liquid crystal displays is notoriously poor due to the use of absorption-based linear polarisers and colour filters. For instance, the light efficiency of PVAL polarisers is typically between 40 and 45 % and the colour filters have a typical efficiency below 35 % which results in a total light and energy-efficiency of the display below 10 %. In the past, a variety of polarizers were developed with an enhanced efficiency in generating linearly polarized light. Typically, these polarizers are based on the polarisationselective reflection, scattering or refraction of light i.e. one polarisation direction of light is directly transmitted to the LCD/viewer and the other polarization direction of light is depolarised and recycled which results in a typical efficiency for generating linearly polarized light of 70-85 %. Also, special colour filters have been proposed based on chiral-nematic reactive mesogens which increase the efficiency of generating colour. Despite the enormous progress in this field, a need persists for improved methods for generating polarized light and colour based on low cost optical components with a high efficiency. Here, the use of holographic phase gratings is reported for the generation of polarized light and colour. The phase grating are recorded in a photopolymer which is coated onto a backor frontlight for LCDs. Typically the recording is performed in the transmisson mode or in the waveguiding mode and slanted phase gratings are generated with their refractive index modulation at an angle between 20o and 45o with the normal of the substrate. It is shown that phase gratings with a high refractive index modulation and a high efficiency can be generated by a proper selection of the photopolymer and illumination conditions. These phase gratings coupleout linearly polarized light with a high contrast (> 100) and the light is directed directly to the LCD/viewer without the need for redirection foils. Dependent on the type of phase grating, the different colours are coupled-out at a slightly different angle which potentially increases the efficiency of classical colour filters. Moreover, the phase gratings are completely transparent in direct view which opens the possibility to use them in frontlights for LCDs. Holographic polarization gratings posses a periodic pattern in the polarization state of light (and not in the intensity of light). A periodic pattern in the polarization direction of linearly polarized light is obtained upon interference of two circularly polarized laser beams. In the second part of the lecture, it is shown that these periodic polarization patterns can be recorded in a linear photo-polymerizable polymer (LPP) and that such an alignment layer induces a period rotation in the director of (reactive and non-reactive) liquid crystals. By a proper design, optical components can be produced with only first order diffraction and with a very high efficiency (>0.98). It is shown that these diffraction gratings are potentially useful in projection displays with a high brightness and energy efficiency

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.130-137
• /
• 1992

The Graft copolymerization of acrylonitrile(AN) and styrene(ST) onto chloroprene rubber(CR) were carried out with benzoyl peroxide(BPO) as an initiator. The synthesized graft copolymer(ACS) was separated from polymeric mixture by the extraction with ethyl acetate and n-hexane, acetone and methanol, dimethylformamide(DMF) and methanol mixed solvent systems. The graft copolymer obtained, acrylonitrile-chloroprene-styrene(ACS) was identified by IR spectrophotometer. The effect of mole ratio of styrene to acrylonitrile, reaction time and temperature, initiator concentration, CR content and solvents on graft copolymerization were examined. It was observed that the grafting efficiency increased with [ST]/[AN] mole ratio and reaction time. The grafting efficiency increased with increasing initiator concentration and CR content. The maximum grafting efficiency was obtained when the mole ratio of [ST]/[AN] was 1.5 and reaction was made at 40hrs, and $70^{\circ}C$ using chloroform/toluene mixed solvent. The thermal properties, light resistance and flammability of ACS were compared with those of ABS and AES. It was found that flame retardancy of related polymers increased in the order ACS>ABS>AES. The thermal stability of ACS was greatly improved when compared with ABS or AES. Morphology of ACS was also investigated by using a transmisson electron microscope(TEM).

• Applied Microscopy
• /
• v.31 no.2
• /
• pp.167-173
• /
• 2001

This study, the ultrastructure of radial glial cells in the fetuses (the 60th, 90th, 105th 120th of gestation) and neonate brains of korean native goat were investigated by immunohistochemical method and transmisson electron microscopy. 1. In the 60th day of gestation, mitochondria and many glycogen body were observed in the radial glial cells. 2. In the 90th day of gestation, mitochondria, many glycogen body and rough endoplasmic reticulum were observed. 3. In the 95th day of gestation, Golgi's apparatus was found. 4. In the 120th day of gestation, Endfeets of radial glial cell attached vessel wall were observed.