• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.913-915
• /
• 1996

This paper proposes the proper phase arrangement of transmission lines for reducing the zero sequence circulating current. It is a well-known fact that the zero sequence circulating currents are principally caused by the untranposed lines and numerical estimation method already has been established. In this paper, the circuit analysis for calculating the zero sequence circulating currents was performed on the existing 154kV four-circuit systems of KEPCO and the proper phase arrangement was determined.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.39-43
• /
• 2022

In this paper, a study was conducted on encapsulation technology for high mechanical stability of flexible displays. First, unlike conventional encapsulation barrier that exclude cracks as much as possible for low water vapor transmission rate (WVTR), mechanical properties were improved by using a defect suppression mechanism introduced with crack arresters. The zero-stress encapsulation barrier optimizes the residual stress of the thin film based to improve the internal mechanical stability. The zero-stress encapsulation barrier was applied to the organic light emitting diodes (OLEDs) to confirm its characteristics and lifetime. Due to improved internal mechanical stability, it has a longer lifetime more than 35% compared to conventional encapsulation technologies. As the zero-stress encapsulation barrier proposed in this study does not require additional deposition process, it is not difficult to apply it. Based on various advantages, it is expected to play an important role in flexible displays.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.282-284
• /
• 1999

This paper presents an accurate algorithm for fault location of a single phase to earth fault on a two-parallel transmission line using only one-terminal data. It is impossible to calculate the accurate fault distance, because of the unknown fault resistance and fault current at the fault point. The faulted line circuit and the zero-sequence circuit of two-parallel line are used as a fault location model, which the source impedance of the remote end is not involved. The algorithm can eliminate the effect of load flow and the fault resistance in calculating the fault location.

• International Journal of Internet, Broadcasting and Communication
• /
• v.6 no.1
• /
• pp.9-12
• /
• 2014

We present a mathematical method for calculation of transmission zero locations, determining a filtering characteristics of two-port systems. By adjusting element values based on the zero locations, the frequency-selectivity is characterized. The characteristic polynomial of ladder networks in externally-loaded feed-forward systems is considered by adopting chain matrices for subsystems. This method can be extended to other types of lumped systems with cross-coupled sections. We find out the zeros by solving characteristics polynomials of closed-form expressions in terms of Laplace impedances of elements. The pairs of complex zeros are shown to be solely from the cross-coupled portion of the system.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.898-905
• /
• 2015

In this paper, we consider a joint beamforming and jamming design to enhance physical layer security against potential multiple eavesdroppers in a multiple-input and single-output cellular broadcast channel. With perfect channel state information at the base station, we propose various design approaches to improve the secrecy of the target user. Among the proposed approaches, the combined beamforming of maximum ratio transmission and zero-forcing transmission with a combination of maximum ratio jamming and zero-forcing jamming (MRT + ZFT with MRJ + ZFJ) shows the best security performance because it utilizes the full transmit antenna dimensions for beamforming and jamming with an efficient power allocation. The simulation results show that the secrecy rate of this particular proposed approach is better than the rates of the considered conventional approaches with quality-of-service and outage probability constraints.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.199-201
• /
• 2003

Because of Korean power system characteristics and increasing power demand, the need of 765kV transmission line is growing gradually. Now a days, KEPCO's 765kV transmission line has been tested and stands for commercial operation. During the first stage, 765kV transmission line will be operated with two voltage grades of 765kV and 345kV, which results the unbalance of power system. So unbalanced current such as zero sequence current flows in the transmission line. In this paper, we describes the simulation study of 765/345kV parallel transmission line by using EMTDC program.

• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.135-138
• /
• 2000

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.57-64
• /
• 2004

In this paper, we propose a RZ/HRZ mixture data transmission method for the asynchronous circuit design to reduce Power consumption. The dual-rail data with Rf decoding scheme is used to design asynchronous circuit, and it is easy to get a completion signal of the data validity from the native data as contrasted with sin91e-rail. However, the dual-rail scheme suffers from large chip area and increasing of Power consumption from all signals by the switching of the return-to-zero. We need to diminish number of circuit switching. The proposed RZ/HRZ data transmission reduces a switching activity to about 50% and it shows 23% lower power consumption than the conventional dual-rail coding with RZ's.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.119-123
• /
• 2015

This paper presents a theoretical study of transmission performance for an optical NRZ (nonreturn-to-zero) transmitter employed a Mach-Zehnder modulator. Especially, we have investigated the effects of the ${\alpha}$-parameters that represents the chirps and the driving voltage ratios(=driving voltage/switching voltage) of Mach-Zehnder modulators for transmitting 25Gbps optical NRZ signals at a wavelength of 1550nm without any dispersion compensation methods over single mode fiber. By optimizing the negative values of ${\alpha}$-parameters for the dispersion tolerance with the change of driving voltage ratios, it has been tested whether the transmission performance has improved. We have verified the improvement by the BERs and the optical eye diagrams.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.320-326
• /
• 2011

Comparative study on the total transmission(zero reflection) has been done between two FSS structures which are coqmposed of the resonant aperture and the nonresonant aperture. It has been found that, the FSS of the resonant aperture has much larger ratio ${\lambda}$/T of wavelength ${\lambda}$ to array periodicity T than that of the FSS of the nonresonant aperture for the total transmission(or zero reflection). Also the operating frequency can be made to be significantly reduced by using such a resonant structure. This physical situation is thought to be similar to that of EOT(Extraordinary Optical Transmission) phenomenon, in optics area.