• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.735-738
• /
• 2019

Recently, orthogonal non-orthogonal multiple access (O NOMA) with polar on-off keying (POOK) has been proposed to mitigate the severe effect of the superposition. However, it is observed that the performance of the O NOMA strong channel user is better than that of the perfect successive interference cancellation (SIC), i.e., the performance of a single user transmission with binary phase shift keying (BPSK). Can the performance of the BPSK modulation be better that that of itself? It is not normal. It should be clearly understood theoretically, with the ultimate bound, i.e., the channel capacity. This paper proves that the channel capacity of the O NOMA strong channel user is non-zero with zero power allocation. Thus, it is shown that the interference is transformed effectively into the meaningful signal.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.126-129
• /
• 2007

Recently the use of wireless network increases according to it solves the hand-off and with path loss, pading, noise etc of wireless network the research for transmission error improvement is developed. TCP and SCTP of standard where it guarantees the reliability of wire network apply in wireless network the congestion control, flow control mechanism used it decreases the efficiency of data transfer throughputs. In this paper, It mixes SCTP and SNOOP for SCTP apply on wireless network, to improve BS(Basic Station) operation processes when the transmission error occurs in wireless network. BS send ZWP(Zero Window Probe) to MN(Mobile Node) when the transmission error occurs so, check path and status and update RWND and error status checked. It selects the new path, send ZWA(Zero Window Advertisement) to FH(Fixed Host) and the prevents call to congestion control or flow control and it does to make wait status standing. Continuously of data transfer after the connection of wireless network is stabilized, it make increase about 10% the transmission throughput of data.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.3
• /
• pp.183-192
• /
• 2003

This paper presents the real-time implemented distance relay algorithm which the fault distance is estimated with only local terminal information. When a single-phase-to-earth fault on a two-parallel transmission line occurs, the reach accuracy of distance relay is considerably affected by the unknown variables which are fault resistance, fault current at the fault point and zero- sequence current of sound line The zero-sequence current of sound line is estimated by using the zero sequence voltage which is measured by relaying location Also. the fault resistance is removed at the Process of numerical formula expansion. Lastly, the fault current through a fault point is expressed as a function of the zero-sequence current of fault line, zero-sequence current of sound line, and line, and fault distance. Therefore, the fault phase voltage can be expressed as the quadratic equation of the fault distance. The solution of this Quadratic equation is obtained by using a coefficient of the modified quadratic equation instead of using the square root solution method. After tile accurate fault distance is estimated. the mote accurate impedance is measured by using such an information.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.2
• /
• pp.131-136
• /
• 2008

From the reciprocal connection by this Internet network researchs about the efficiency improvement of the whole system is accomplished with the method which reduces delays in message transmission. From here, we will do a comparative study between the user data program protocol (UDP) and the zero copy which does not use the buffer cache to fine out the valid method to improve the efficiency. In this thesis, I will change the message copy from execution process of the buffer cache of the TCP/IP on Unix OS with process on Linux OS. The object of conversion is to show you that the zero copy which doesn't use the buffer cache from transfer control class improves the communication efficiency.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.10
• /
• pp.1264-1271
• /
• 1999

In this paper, an efficient method of analysis and design of fault detection filter is presented. Since the directional constraint is applied to the eigenstructure associated with the detection space, an eigenvector is determined by the eigenvalues associated with other eigenvectors. Further, the assignment of a pair of eigenvalue and eigenvector leads to the fixation of overall eigenstructure related with the detection space. Using the transmission zeros and the transmission zero vectors, these phenomenon are clearly proven, and an efficient algorithm for design of the fault detection filters is presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1089-1095
• /
• 2006

In this paper, the circuit analysis of three-dimensional bandpass filter with transmission zero in multi-layer printed circuit board is presented. The equivalent circuit of bandpass filter is evaluated by microwave network analysis. Compare to the established paper that have configured the circuit model of filter except the effect of distribute element, the proposed model can include the effect. As a result, the multi-layer PCB bandpass filter with transmission zero has designed by extracting mutual capacitance from electrical component inside inductor. The structure size is only $10mm{\times}20mm{\times}1.251mm$. Measured data of the bandpass filter indicate 1.9 dB of insertion loss and 28 dB of return loss at the center frequency of 1.84 GHz, as well as 43 dB attenuation at the refraction frequency of 2.78 GHz.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.30-35
• /
• 2003

In the control system analysis and synthesis, the nonminimum phase system has some difficulties due to the undershoot behaviour and the constrained sensitivity function. SISO problems has been widely investigated in the literatures, and it is well known that the undershoot cannot be eliminated by any linear feedback control. However, the undershoot compensation in MIMO system is less studied, and this paper is to deal with the zero property and the nonminimum phase behaviour of the MIMO system. Firstly, some definitions of the zeros will be introduced. Second, some systems including nonminimum phase transmission zeros are exemplified to show that the undershoot behaviour could be eliminated by a linear feedback in MIMO systems.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.203-204
• /
• 2006

We present and demonstrate a novel method of alternate-phase return-to-zero (RZ) signal generation and pulse-amplitude equalization simultaneously in a rational harmonic mode-locked fiber ring laser, using a dual-drive Mach-Zehnder (MZ) modulator. By adjusting the voltages applied to both arms of the modulator, the rational harmonic mode-locked pulse trains are equalized in their amplitudes. In addition to that, the amplitude-equalized pulse trains multiplying the repetition rate at ${\sim}10\;GHz$ have alternate $\pi$ phase difference between adjacent pulses. The alternate-phase RZ signal generated by the proposed method enhances transmission performance through the single-mode fiber (SMF) links without dispersion compensation.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.1
• /
• pp.38-44
• /
• 2001

For double-circuit transmission line systems, an accurate digital distance relaying algorithm immune to the reactance effect is proposed. The apparent impedance calculated by the distance relay is influenced by the combined reactance effect of the fault resistance and the load current as well as the mutual coupling effect caused by the zero-sequence current of the adjacent parallel circuit. To compensate the magnitude and phase of the estimated impedance, this algorithm uses phase angle difference between the zero(positive) sequence of the both side of the system seperated by the fault point. The impedance measuring algorithm presented used a current distribution factor to compensate mutual coupling effect instead of the collected zero-sequence current of the adjacent parallel circuit.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.3 s.8
• /
• pp.73-78
• /
• 2005

In this paper, a bandpass filter with excellent cut off characteristic due to transmission zero using bypass coupling capacitor and with superior harmonic characteristic by interdigital capacitor is suggested. The measurement results for SIR bandpass filter with bypass coupling capacitor and interdigital capacitor show that the insertion loss is less than 1.9 dB and the return loss is better than 15.4 dB with 4.2 % bandwidth at the center frequency of 5.78 GHz.