• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.582-585
• /
• 2012

The aluminum extruded panel used for a high speed train shows the largest contribution to sound insulation performance of the train body. However, comparing with the flat panel having the same weight, the transmission loss falls sharply in the local resonance frequency band. Such fall of transmission loss can be improved by increasing the damping of local resonance. This study examines the charging effect of an urethane foam on the aluminum extruded panel of a high speed train. We charged the urethane foam with different mass density and in different way in the core part of the extruded panel. We measure the transmission loss and compare the sound insulation performance according to the density and charging method. Finally, Improvement effect of the transmission loss is compared and analysed in aspect of weight increment.

• 한국소음진동공학회논문집
• /
• 제26권5호
• /
• pp.559-566
• /
• 2016

This study shows a development procedure and results of noise reduction for a new developed FF 8th speed automatic transmission. Based on planetary gear operating frequency analysis using PTA(planetary transmission analysis) program developed in 2012, It is expected that gear noise of the rear planetary gear set could be recognized easily in the concept design stage. Therefore, pRMC (planetary run many cases) analysis program that is developed in 2012 was applied to minimize the planetary gear noise level and noise distributions versus torque. To minimize noises coming from oil pump and final gears of a new transmission, several changes were applied, such as changing the clearance of double angular ball bearing, the oil pump rotor tooth number from 9 to 11 and the oil pump type from parachoid to megafloid and so on. Besides, stiffness values of the transmission case and the mount bracket were measured and reinforced properly. Finally, The total noise of the new FF 8th speed automatic transmission was developed successfully. Furthermore, E.O.L. testers also have been adapted to control the noise quality of automatic transmission assembly in the manufacturing factory. This paper could provide practical solutions to the automatic transmission NVH problems.

• 한국기계가공학회지
• /
• 제15권5호
• /
• pp.57-65
• /
• 2016

The power flow of an 8-speed automatic transmission was analyzed using a lever analogy for the manufacturing of planetary gears. From the analysis, we found that the engine power was split between the first and second double-pinion planetary gears (DPPG1 and DPPG2), and was then passed to the DPPG3 for the fourth speed. For the fifth speed, the engine power was split between the DPPG1 and DPPG3. For the speeds 6-8, the engine power was passed only to SPPG2, while the seventh speed contained the power circulation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.258-264
• /
• 2000

This study is to establish test method and evaluation technology of drive system appropriate to high speed train. The transmission system of high speed train serve in the severe condition compared with those of other trains, namely, they have to transmit high power to run with high speed and they have to make maximum use of the limited space. This paper reports the reviews and results for the test and evaluation method of reduction gearbox for high speed train and discusses various test items and methods about assembly and parts of gearbox transmission.

• 한국통신학회논문지
• /
• 제15권10호
• /
• pp.829-841
• /
• 1990

본 논문에서는 우리 나라 디지털 다중화 계위 5차군 전송속도 564.993Mb/s를 실제의 광전송 데이터 속도라 가정하고, 국내 565Mb/s 광전송시스템을 유지 보수할 뿐만 아니라 디지털 광전송용 통신망을 B.S.I.화하기 위하여, 단국중계장치에서 기존의 전송로부호들 중 최적의 전송로부호라 사료되는 mBIZ 전송로부호를 이용한 새로운 전송로 프레임 구조를 제안한다. 제안한 프레임 구조대로 565Mb/s 광전송용 단국중계장치에서 순수정보신호계열의 속도를 변환한 후 pulse stuffing 하는 방식으로 시스템 하드웨어를 실현시킨 결과, 전송 에러에 의한 연속적인 시스템 에러 파급 현상 즉, 도미노 현상을 방지할 수 있었으며, timing jitter와 동부호연속수도 억압할 수 있었다. 또한 광단국장치에서의 total BER을 10정도까지 향상시킬 수 있기 때문에 시스템 SNR을 2dB 정도 개선할 수 있었다.

• 한국ITS학회 논문지
• /
• 제10권1호
• /
• pp.16-26
• /
• 2011

가변속도제어(Variable Speed Limit ; VSL)는 교통상황에 따라 속도를 차등 제한하여 혼잡 또는 사고지점에 도달하기전 차량간, 차로간 속도편차를 감소시킴으로써 사고를 예방하고 총 지체를 최소화하기 위한 연속류 ITS기법 중 하나이다. 본 연구에서는 가변속도 제어시 연속류 기본구간의 동적교통류에 대한 수학적 분석결과를 기초로 가변속도제어 수행모형을 제시하고 효과분석을 수행하였다. 가변속도제어모형은 병목현상 발생시 상류부에 전파되는 충격파의 속도를 최소화 함으로써 지체를 감소시킬 수 있도록 graphical solution을 적용하여 제시한다. 또한 가변속도 제어시 해당 지점으로부터 하류부로 전파되는 충격파의 생성 및 움직임을 모형화 하여 재현하며 그 방법론으로는 Cell-Transmission Model 및 Supply-Demand Method를 적용하였다. 가변속도제어 적용에 따른 효과분석으로는 제어를 통한 지체감소의 효용성 및 안전도 측면에서 각 Cell별 속도 및 밀도의 표준편차의 개선정도를 살펴보았다. 향후 본 연구의 이론적 검증 및 분석 결과를 토대로 다양한 가변속도제어모형 및 운영방안을 개발할 수 있을 것으로 예상한다.

• 대한임베디드공학회논문지
• /
• 제13권2호
• /
• pp.93-100
• /
• 2018

In this paper, we present a novel scheme of data transmission for logistics vehicles connected with 3G mobile communication networks. The proposed method enhances the efficiency of data transmission by varying the packet transmission period according to the vehicle speed and by reducing the amount of transmitted data using a reduced packet structure. The main contribution is to present the experimental verification in which the proposed method is applied to commercial logistics vehicles that operate with networked data transmission modules. Being compared with the existing method, the proposed scheme shows superior performance in terms of data reduction and transmission speed.

• 한국컴퓨터정보학회논문지
• /
• 제24권8호
• /
• pp.137-142
• /
• 2019

This paper proposed bitmap based spatial data transmission scheme in need of rapid transmission through network in mobile environment that use and creation of data are frequently happen. Former researches that used clustering algorithms, focused on providing service using spatial data can cause delay since it doesn't consider the transmission speed. This paper guaranteed rapid service for user by convert spatial data to bit, leads to more transmission of bit of MTU, the maximum transmission unit. In the experiment, we compared arithmetically default data composed of 16 byte and spatial data converted to bitmap and for simulation, we created virtual data and compared its network transmission speed and conversion time. Virtual data created as standard normal distribution and skewed distribution to compare difference of reading time. The experiment showed that converted bitmap and network transmission are 2.5 and 8 times faster for each.

• 드라이브 ㆍ 컨트롤
• /
• 제14권4호
• /
• pp.71-78
• /
• 2017

The power train of hydro-mechanical continuously variable transmission (HMCVT) for 8-ton class forklift includes hydro-static units, hydraulic multi-wet disc brake & clutches and complex helical & planetary gears. The helical & planetary gears are key components of HMCVT's power train wherein strength problems are the main concerns including gear bending stress, gear compressive stress, and scoring failure. Many failures in power train gears of HMCVT are due to the insufficient gear strength and resonance problems caused by major excitation forces, such as gear transmission error of mating gear fair in the transmission. In this study, wherein excitation frequencies are the gear tooth passing frequencies of the mating gears, a Campbell diagram is used to calculate the power train gears' critical speeds. Mode shapes and natural frequencies of the power train gears are calculated by CATIA V5. These are used to predict resonance failures by comparing the actual working speed range with the critical speeds due to the gear transmission errors of HMCVT's power train gears.

• 한국생산제조학회지
• /
• 제24권3호
• /
• pp.320-326
• /
• 2015

Despite the wide industrial applications of planetary gear trains, the relationship between the design parameters (tooth profile, carrier mass, etc.) and performance (strength, vibration, noise, etc.) remains poorly understood. A significant amount of research has focused on transmission errors, which are measurable performance indicators directly related to the design parameters. Herein, an experimental test rig for a single-stage planetary gear set built using digital angular encoders and gap sensors is described. To study the static and dynamic characteristics of this planetary gear train, the transmission errors and sun gear orbit are analyzed from the data measured under various levels of torque and speed. The transmission errors of the gear train decrease 40% when the speed increases from 30 to 600 rpm with an output torque of 39.2 Nm, and increase 22% when the output torque increases from 19.6 to 39.2 Nm with an input speed of 30 rpm.