• Journal of Internet Computing and Services
• /
• v.12 no.5
• /
• pp.21-28
• /
• 2011

Recently medical and entertainment applications using conducting textile are suggested, but the data of conducting threads are not characterized, classified and verified. Only the data sheet published by manufacturing companies is available. Thus we need to verify the performances of the threading threads in communication. And we need a guideline if the existing communication protocols can be used for the conducting threads communication or the new specific communication protocols have to be developed for the communication. This paper classifies the characteristics of conducting threads made by domestic and overseas companies. Based on the criteria we classified conducting threads into three classes: class A, class B and class C. Further we carried out experiments to verify the adaptability of existing simple serial communication protocols such as RS232. Six different conducting threads are used in experiments and the length of each thread was 0.5m, 1m, 2m and 3m. The data transmission rate and error rate are collected and analyzed. RS485 is very prone to error due to static electricity from human and environment. So it may not be appropriate as long-distance communication protocol up to 12km which is possible in theory. RS232 shows stable and error-less data transmission ability even though every conducting thread didn’t show transmission capability over RS232. USB protocol shows high data rate transmission but the distance cannot be exceeded over 2m. Additionally, USB requires stable power supply. But if the power is supplied through conducting thread, its function is not.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.82.2-82
• /
• 2001

In this paper, when we design and implement an internet-based teleoperation control, some important points that should be considered (e.g., transmission characteristics, time delay prediction and transmission protocol are inspected and simulated. First, we will investigate data transmission characteristics at the Internet, and build a model for the transmission delay and packet loss through the characteristics of that effect. And then, we inspect how to predict transmission delay, and examine transmission protocols which are proper for the control-oriented Internet protocol. Finally, we apply it to a force-reflective teleoperation control system that consists of a six d.o.f haptic interface and a five d.o.f manipulator via the Internet.

• Journal of Communications and Networks
• /
• v.12 no.1
• /
• pp.11-18
• /
• 2010

Diversity-multiplexing tradeoff (DMT) is an efficient tool to measure the performance of multiple-input and multiple-output (MIMO) systems and cooperative systems. Recently, cooperative multicast system with wireless network coding stretched tremendous interesting due to that it can drastically enhance the throughput of the wireless networks. It is desirable to apply DMT to the performance analysis on the multicast system with wireless network coding. In this paper, DMT is performed at the three proposed wireless network coding protocols, i.e., non-regenerative network coding (NRNC), regenerative complex field network coding (RCNC) and regenerative Galois field network coding (RGNC). The DMT analysis shows that under the same system performance, i.e., the same diversity gain, all the three network coding protocols outperform the traditional transmission scheme without network coding in terms of multiplexing gain. Our DMT analysis also exhibits the trends of the three network coding protocols' performance when multiplexing gain is changing from the lower region to the higher region. Monte-Carlo simulations verify the prediction of DMT.

• Journal of Communications and Networks
• /
• v.17 no.2
• /
• pp.203-209
• /
• 2015

Although mobile applications are an essential characteristic of wireless sensor networks, most existing media access control (MAC) protocols focus primarily on static networks. In these protocols, fixed periodic neighbor discovery and schedule updating are used to connect and synchronize neighbors to provide successful data transmission; however, they cannot adapt to mobile speed variation and degrade the network performance dramatically. In this paper, we propose a mobile-supporting mechanism for MAC protocols, in which the decision to update the neighbors of a mobile node is made adaptively according to the mobile speed. Analysis and simulation results demonstrate that the mechanism efficiently avoids the disconnection of amobile node from its neighbors and achieves a better performance as compared with fixed periodic neighbor discovery.

• International Journal of Computer Science & Network Security
• /
• v.22 no.7
• /
• pp.240-244
• /
• 2022

The common goals of designing a routing algorithm are not only to reduce control packet overhead, maximize throughput and minimize the end-to-end delay, but also take into consideration the energy consumption. Scalability is an important factor in designing an efficient routing protocol for wireless sensor networks (WSN's). Three metrics (power consumption, time of transmission and packet loss rate) are used in order to compare three routing protocols which are AODV, DSDV and LEACH.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1215-1223
• /
• 2014

In multi-hop wireless networks, a message transmission path is set up on demand by a route discovery step, where a shortest path is used in general. The shortest path, however, normally uses the nodes near the center area, which causes a high traffic load in that area and reduces the message transmission reliability. We propose a stable routing protocol considering the remaining energy of nodes. Our protocol uses ETX as a link performance estimator and tries to avoid the nodes with smaller energy. By doing this, we can reduce the route failure probability and packet loss. We have evaluated the performance of the proposed protocol using QualNet and compared with AODV and MRFR protocols. The simulation result shows that our protocol has a similar performance as MRFR in terms of end-to-end message reception ratio, average message delay and delay jitter, but outperforms MRFR in terms of traffic load distribution.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.2
• /
• pp.220-224
• /
• 2015

The DCF (Dcistributed Coordination Function) and PCF (Point Coordination Function) are the basic MAC (Medium Access Control) protocols of IEEE 802.11 wireless LANs. According to the DCF, each node performs the exponential backoff algorithm before the transmission of its data frame. Each node doubles the backoff waiting time before the transmission of its data frame whenever it detects the transmission collision with other nodes. Therefore, as the number of the active nodes having the data frames to transmit increases, the overall MAC performance of the DCF decreases. On the other hand, according to the PCF, each node is granted the transmission opportunity by which the PCF transmission is possible without the collision with other nodes. Therefore, as the number of the active nodes increases, the MAC performance of the PCF increases, In this paper, considering the tradeoff of MAC performance between the DCF and PCF, a hybrid MAC protocol is proposed to enhance the performance of IEEE 802.11 wireless LANs.

• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1460-1465
• /
• 2016

In this paper, we propose an energy efficient and multimedia traffic friendly MAC protocol (EEMF-MAC) that controls sender's wakeup period based on the data packet's transmission urgency and the receiver's wakeup periods based on the received data packet traffic loads. The protocol is useful for applications such as object tracking, real time data gathering, in which priority-based packet transmission is required. The basic idea of EEMF-MAC is that it uses the priority concept with transmission urgency of sender's data packet to reduce the transmission delay of the urgent data and it also uses duty cycling technique in order to achieve energy efficiency. EEMF-MAC showed a better performance in energy efficiency and packet transmission delay compared to existing protocols, RI-MAC and EE-RI-MAC.

• International journal of advanced smart convergence
• /
• v.7 no.4
• /
• pp.197-205
• /
• 2018

Nowadays, wireless sensor networks (WSNs) have been widely adopted in structural health monitoring (SHM) systems for social overhead capital (SOC) public infrastructures. Structural health information, environmental disturbances and sudden changes of weather conditions, damage detections, and external load quantizing are among the capabilities required of SHM systems. These information requires an efficient transmission with which an efficient mobility management support for wireless networks can provide. This paper deals with the analysis of mobility management schemes in order to address the real-time requirement of data traffic delivery for critical SHM information. The host-based and network-based mobility management protocols have been identified and the advantages of network mobility (NEMO) enabled Proxy Mobile Internet Protocol version 6 (PMIPv6) have been leveraged in order to address the SHM information transmission needs. The scheme allows an efficient information transmission as it improves the handover performance due to shortened handover latency as well as reduced signaling overhead.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.98.2-98
• /
• 2001

It is necessary to have enough transmission capacity for advanced internet techniques and various digital home appliances networking. Home appliances interface IEEE1394 technique has much wealthy transmission skill. IEEE1394 is using home appliances through various information form image and voice change data real time print out. In this paper, AVC CTS technology and IEEE1394 technology are introduced. Digital Video Camera includes compression format using DV. System composition control is consisted of protocols like IEC-61883 and AV/C command set standard.