• Journal of computational fluids engineering
• /
• v.16 no.1
• /
• pp.53-59
• /
• 2011

In this study, steady and unsteady aerodynamic analyses of a huge rocket configuration have been conducted in a transonic flow region. The launch vehicle structural response are coupled with the transonic flow state transitions at the nose of the payload fairing. Before performing the coupled fluid-structure transonic aeroealstic simulations transonic aerodynamic characteristics are investigated for the pitching motions of the rocket at finite angle-of-attack. An unsteady CFD analysis method with a moving grid technique based on the Reynolds-averaged Navier-Stokes equations with the k-w SST transition turbulence model is applied to accurately predict the transonic loads of the rocket at pitching motion. It is shown that the fluctuating amplitude of the lateral aerodynamic loads imposed on the rocket due to the pitching motion can be significantly increased in the transonic flow region.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.2
• /
• pp.135-140
• /
• 2003

The difference in lattice parameter and thermal expansion coefficient between GaN and Si which results in many defects into the grown GaN is larger than that between GaN and sapphire. In order to obtain high quality GaN films on Si substrate, it is essential to understand growth characteristics of GaN. In this study, GaN layers were grown on Si(111) substrates by MOCVD at three different GaN growth temperatures ($900^{\circ}C$, $1,000^{\circ}C$ and $1,100^{\circ}C$), using AlN and LT-GaN buffer layers. Using TEM, we carried out the comparative investigation of growth characteristics of GaN by characterizing lattice coherency, crystallinity, orientation relationship and defects formed (transition region, stacking fault, dislocation, etc). The localized region with high defect density was formed due to the lattice mismatch between AlN buffer layer and GaN. As the growth temperature of GaN increases, the defect density and surface roughness of GaN are decreased. In the case of GaN grown at $1,100^{\circ}$, growth thickness is decreased, and columns with out-plane misorientation are formed.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.310-314
• /
• 2002

The exact pitch (fundamental frequency) extraction is important in speech signal processing like speech recognition, speech analysis and synthesis. However the exact pitch extraction from speech signal is very difficult due to the effect of formant and transitional amplitude. So in this paper, the pitch is detected after the elimination of formant ingredients by flattening the spectrum in frequency region. The effect of the transition and change of phoneme is low in frequency region. In this paper we proposed the new flattening method of log spectrum and the performance was compared with LPC method and Cepstrum method. The results show the proposed method is better than conventional method.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.78.1-78.1
• /
• 2014

An ionization front (IF) surrounding an H II region is a sharp interface through which a cold neutral gas makes transition to a warm ionized phase by absorbing UV photons from central massive stars. We investigate the structure and instability of a plane-parallel D-type IF threaded by magnetic fields parallel to the front. We find that magnetic fields increase the maximum propagation speed of the IFs, while reducing the expansion factor, defined as the density ratio of neutral to ionized phases. IFs become unstable to distortional perturbations due to gas expansion across the fronts, exactly analogous to the Darrieus-Landau instability of ablation fronts in terrestrial flames. The growth rate of the IF instability is proportional linearly to the perturbation wavenumber as well as the upstream flow speed. The IF instability is stabilized by gas compressibility and becomes completely quenched when the front is D-critical. The instability is also stabilized by magnetic pressure when the perturbations propagate in the direction perpendicular to the fields. When the perturbations propagate in the direction parallel to the fields, on the other hand, it is magnetic tension that reduces the growth rate, completely suppressing the instability when ${\beta}$ < 1.5, with ${\beta}$ denoting the square of the ratio of the sound speed to the Alfven speed in the pre-IF region. When the front experiences an acceleration, the IF instability cooperates with the Rayleigh-Taylor instability to make the front more unstable. We discuss potential effects of IF instability on the evolution and dynamics of IFs in the interstellar medium.

• Journal of the Korean Ceramic Society
• /
• v.24 no.6
• /
• pp.561-571
• /
• 1987

In case of glass ceramics and powder preparation from the metalakoxide solutions, metalakoxide solutions with a various species of alkoxy groups have unique characteristics. Therefore, in this study, the mixing ability of homogeneous sol, gel morphology and physical properties of gels were investigated by the changes in terms of the different four alkoxy groups, CH3-, C2H5-, i-C3H7-n-C4H9-, along with the catalyst for the purpose of the observation about the homogenous transition range from sol to gel. As a result, when the fixed condition was mol ratio of H2O/Si(OR)4=2.0 and variables were batch composition and addition amount of catalyst, the characteristics of Tetra-normal-Butoxysilane and Tetra-iso-propoxysilane systems had very narrow sol-gel conversion region than Tetramethoxysilane and Tetraethoxysilane system. And silicon-alkoxide, systems having narrow sol-gel conversion region were enlarged by addition of catalyst. In viewpoint of the weight loss of gel produced by hydrolysis of silicon alkoxide systems with different four alkoxy groups, the amounts of weight loss of gel containing large molecular alkoxy groups were much more than those of small molecular alkoxy group.

• Speech Sciences
• /
• v.10 no.2
• /
• pp.85-95
• /
• 2003

In speech signal processing, it is very important to detect the pitch exactly in speech recognition, synthesis and analysis. If we exactly pitch detect in speech signal, in the analysis, we can use the pitch to obtain properly the vocal tract parameter. It can be used to easily change or to maintain the naturalness and intelligibility of quality in speech synthesis and to eliminate the personality for speaker-independence in speech recognition. In this paper, we proposed a new pitch detection algorithm. First, positive center clipping is process by using the incline of speech in order to emphasize pitch period with a glottal component of removed vocal tract characteristic in time domain. And rough formant envelope is computed through peak-fitting spectrum of original speech signal infrequence domain. Using the roughed formant envelope, obtain the smoothed formant envelope through calculate the linear interpolation. As well get the flattened harmonics waveform with the algebra difference between spectrum of original speech signal and smoothed formant envelope. Inverse fast fourier transform (IFFT) compute this flattened harmonics. After all, we obtain Residual signal which is removed vocal tract element. The performance was compared with LPC and Cepstrum, ACF. Owing to this algorithm, we have obtained the pitch information improved the accuracy of pitch detection and gross error rate is reduced in voice speech region and in transition region of changing the phoneme.

• Electrical & Electronic Materials
• /
• v.10 no.3
• /
• pp.210-216
• /
• 1997

The th ermal and optical properties of multicomponent oxide glass optical fiber by adding heavy metal oxide Ga$_{2}$O$_{3}$(0-20wt%) were investigated. The fiber samples were made by the method of rod in tube. The optical loss of fiber was measured in 0.3-1.8.mu.m wavelength region. As Ga$_{2}$O$_{3}$ increased up to 20wt%, the transition and softening temperature of bulk glass were increased from 495.deg. C to 579.deg. C and from 548.deg. C to 641.deg. C, respectively. Whereas the thermal expansion coefficient was decreased from 102 to 79.1x10$^{-7}$ /.deg. C. The refractive index was increased from 1.621 to 1.665, and IR cut-off wavelength was enlarged from 4.64.mu.m to 6.1.mu.m. The optical loss of fiber was remarkably decreased in 1.146.mu.m-1.8.mu.m wavelength region.

• Journal of Energy Engineering
• /
• v.12 no.2
• /
• pp.131-138
• /
• 2003

This paper considered the structural mechanism of transitional boundary layer by the experimental approach. In order to measure the turbulence quantity in the boundary layer, we made a wind tunnel with 400${\times}$190${\times}$2500 mm test section and a flat plate with well fabricated leading edge. Hot wire anemometer was used for acquiring the continuous turbulence signal which is processed by special software. The results of experiment show that the region where turbulence spot is dominant moves from near wall to overall layer and thus the anisotropy of velocity fluctuation shows so large value. Also the turbulence energy originally contained in low frequency band comes up to the high frequency band. Finally the turbulence model needs minimum two length scales to consider the pre-transition region.

• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.9-14
• /
• 2004

Recently, various bulk metallic glasses (BMG's) having good mechanical and chemical properties were developed. BMG's can easily be deformed in the supercooled liquid region, via viscous flow mechanism. By using the viscous flow, the very low pressure is needed to deform the materials. In this study, we investigated the structural transition and deformation behavior of Vitreloy 1 (Zr/sub 41.2/Ti/sub 13.8/Cu/sub 12.5/Ni/sub 10/Be/sub 22.5/) using TMA and DSC. We applied the results to the micro forming process. The forming condition was chosen based on the viscosity data from TMA, and Si wafer with micro patterns on the surface was used as a forming die. The deformed surface was analyzed by SEM and 3D Surface Profiling System. The alloy showed good replication of the patterns. Quantitative measurement of roughness was useful to evaluate the replication. Surface condition of the deformed surface was determined by the initial surface condition.

• Journal of The Korean Astronomical Society
• /
• v.40 no.4
• /
• pp.133-135
• /
• 2007

A survey project of TRAO with the fifteen beam array receiver system is presented. A multibeam array receiver system has been purchased from FCRAO, and is being installed on TRAO 14m telescope. The target region of the survey is from ${\iota}=120^{\circ}{\sim}137^{\circ},\;b=-1^{\circ}{\sim}+ 1^{\circ}$, and velocity resolution would be 1 km/sec after smoothing from the original resolution of $0.64km\;s^{-1}$ in the transition of J = 1-0 of $^{13}CO$. The survey region is a part of the $^{12}CO$ Outer Galaxy Survey(OGS), and would be an extension of the Bell Laboratories $^{13}CO$ Galactic Plane Survey. By combining with the existing $^{12}CO$ database of the Outer Galaxy Survey, we will derive physical properties of identified molecular clouds and will conduct and statistical analysis of the Outer Galalxy molecular clouds. Reduction process and analysis methods will be introduced.