• Journal of the Korean Ceramic Society
• /
• v.27 no.7
• /
• pp.841-850
• /
• 1990

The electrical conductivity of SrTiO3 thick films, which has been prepared by screen printing and sintering on polycrystalline Al2O3 substrates, was determined as a function of oxygen partial pressure and temperature. The data showed that electrical conductivity was proportional to the -1/4th power of the oxygen partial pressure for the oxygen partial pressure range from 10-4-10-8 to 10-20 atm and proportional to Po2+1/4 for the oxygen partial pressure range from 10-6-10-4 to 1atm. And then n-p transition region of electrical conductivity moved to lower oxygen partial pressure region as the sintering temperature of thick film specimens increased under about 140$0^{\circ}C$. These data were consistent with the presence of small amounts of acceptor impurities in SrTiO3 thick film which have been diffused from Al2O3 substrate in the range of solid solubility limit.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.1
• /
• pp.9-18
• /
• 2003

An experimental study was performed to investigate the turbulence intermittency measuring methods across the boundary layer in the transition region. A single type hot-wire probe was used to measure instantaneous streamwise velocities in laminar, transitional and turbulent boundary layer To estimate wall shear stresses on the flat plate, near wall mean velocities are applied to the principle of CPM. Distribution of intermittency factor is obtained by dual-slope method and compared to the results of four methods,$\'{u},\;\{U}$, TERA and M-TERA method. In these methods, M-TERA shows a good agreement in the near wall region. However, the result of M-TERA method shows that intermittency factor is underestimated in the outer part and outside of the boundary layer and the dimensional constant of M-TERA method should be changed appropriately depending on measuring point.

• Journal of the Korean Society for Precision Engineering
• /
• v.5 no.4
• /
• pp.24-31
• /
• 1988

The Upper Bound Solution has been used to investigate the effect of the various parameters on the floating-plug tube-drawing precess. A kinematically admissible velocity field considering the change of the tube thickness is proposed for the deformation process. Taking into account the position of the plug in the deforming region, shear energy at entrance and exit, friction energy on contact area, homogeneous energy are calculated. The theoretical values in proposed velocity field are good agreement with experimental values, It is investigated that the tube thickness in the deforming region is changed slightly toward minimization of deforming energy and then the drawing stress in lower than the crawing stress in the velocity field that the tube thickness is uniform.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.72.1-72.1
• /
• 2010

We present infrared and millimeter observations of the active star-forming complex W51. A $1.25\;deg\times1.00\;deg$ region that includes the W51 complex was covered in the J = 2 - 1 transition of the $^{12}CO$ and $^{13}CO$ molecules with the University of Arizona Heinrich Hertz Submillimeter Telescope. We use a statistical equilibrium code to estimate physical properties of the molecular gas. Using Spitzer data we identify young stellar objects (YSOs) and fit model spectral energy distributions to these sources and constrain their physical properties. We compare the molecular cloud morphology with the distribution of infrared and radio continuum sources and find associations between molecular clouds and YSOs. We estimate that about 1% of the cloud mass is currently in YSOs.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1472-1475
• /
• 1996

D-E hysteresis loops have been measured for the 65/35 mole % copolymer of vinylidene fluoride and trifIuoroethyIene over wide temperature range. The results were analyzed and discussed. The remanent polarization and the coercive field at room termperature were estimated to be 75 $mC/m^3$ and 55 MV/m respectively. D-E hysteresis loops were observed even below the glass transiation temperature$-20^{\circ}C$) and the remanent polarization and the coercive field were larger than larger, as the temperature lower. It seems that the remanent polarization and the coercive field depend on the amorphous region as well as crystalline region in this copolymer. And the ferroelectric-to-paraelectric phase transition was observed at $90^{\circ}C$ on heating and $80^{\circ}C$ on cooling. Double hysteresis loops were observed at the temperature($85^{\circ}C$) of paraelectric phase.

• Journal of Surface Science and Engineering
• /
• v.29 no.6
• /
• pp.660-665
• /
• 1996

Thin films of indium oxide and indium tin oxide have been prepared by d.c. magnetron sputtering onto the fused silica substrates kept at 90, 200 and $300^{\circ}C$. In order to elucidate the optical absorption process in low energy region below 3 eV, we have analyzed the absorption coefficients obtained from reflectance and transmittance measurements for these films based on the Lucovsky model. It has been found for the first time that a defect center in the band gap is located at 0.8~1.4 eV below the Fermi level in all films and arises from oxygen vacancies in their films. The optical absorption in low energy region is explained to be dominated by the transition of electrons trapped at the positively charged (+2e) oxygen vacancies with s-like nature to the conduction band formed from the 5s-orbit in indium atoms.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.527-532
• /
• 1997

Design strength of structural members could be determined by applying a strength reduction factor to nominal strength. At the beginning point of the transition region for the strength reduction factor, P=0.1$\sigma$$_{ck}A_g$, only sectional area and concrete strength are adopted as the variables of P=0.1$\sigma$$_{ck}A_g$. Therefore, P=0.1$\sigma$$_{ck}A_g$ is the empirically adopted which does not consider steel ratio, steel yielding stress, and steel arrangement. So, this research was perpormed the computer program for the analysis of axial force-moment-curvature relationship of reinforced concrete columns by sectional behaviour nonlinear analysis using a concrete compressive stress-strain curve, in order to investigate the ductility of reinforced concrete columns. As a result, ductility indicies of axial force, P=0.1$\sigma$$_{ck}A_g$, represented the lack of consistency of the indicies value for the various sections.

• Journal of ILASS-Korea
• /
• v.9 no.2
• /
• pp.41-49
• /
• 2004

Liquid breakup under the variation of AC frequency has been studied experimentally in the electrohydrodynamic atomization. The effect of parameters such as charging voltage, flow rate, nozzle tip inner diameter and power frequency have been considered. This work was performed to investigate the experimental analysis for the effect of AC frequency on breakup process, the mapping of occurrence of disintegration region, and the relationship between the applied power and the droplet radius. The experimental results show that the increase of applied voltage in a certain frequency band leads to a reduction in the droplet size within the limits from 50Hz to 400Hz. The transition phenomena from dripping mode to spindle mode were observed under the band of sudden fall of droplet radius changing ratio, and the synchronous region were produced within the range of applied voltage from 5kV to 6kV.

• YAKHAK HOEJI
• /
• v.49 no.3
• /
• pp.205-211
• /
• 2005

The 3' UTR (3' untranslated region) plays important roles in controlling gene expression through regulating 3' polyadenylation, mRNA export, subcellular localization, translational efficiency, and mRNA stability. Changes in the 3' UTR sequence in an expressed transcript can result in functional changes of the genes that are expressed in pathological conditions compared with those genes expressed in normal physiologic conditions. A genome-wide survey of 3' UTR variation was performed for the genes expressed during hematopoietic differentiation from CD34+ stem/progenitor cells to CD 15 + myeloid progenitor cells. Wide-spread differential usage of the 3' UTR was observed from the genes expressed during this cellular transition. This study implies that the 3' UTR can be a highly coordinated region for post-transcriptional regulation of the function of expressed genes.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.24.4-25
• /
• 2009

We have investigated the radiational fields through a hydrodynamical stellar model atmosphere. Stellar convection zone is the extremely turbulent region composed of partly ionized compressible gases in high temperature. Moreover, super-adiabatic layers are the transition region in energy transport from convection to radiation. Therefore, opacities and thermodynamic properties due to interaction of matter and radiational fields vary significantly with depth. In order to describe radiational fields accurately, the Opacity Distribution Function (ODF) and the Accelerated Lambda Iteration (ALI) have been applied to hydrodynamic medium. As the first result of our radiative transfer, we present time-dependant variation of radiational fields and thermodynamic structures. Our non-gray transfer model has been compared with the conventional Eddington Approximation. Detailed information of radiational fields and thermodynamic properties will provide deeper insight of physical processes inside stellar atmospheres.