• 대한기계학회논문집B
• /
• 제29권1호
• /
• pp.80-86
• /
• 2005

This study presents numerical solutions of the two-dimensional Navier-Stokes equations for supersonic unsteady flow in a convergent-divergent nozzle with heat addition. The TVD scheme in generalized coordinates is employed in order to calculate the moving shock waves caused by thermal choking. We discuss on transient characteristics, start and unstart phenomena, fluctuations of specific thrust caused by thermal choking and viscous effects. We prove that the control of separation of boundary layer is the most important key problem to prevent the thermal choking.

• KSBB Journal
• /
• 제6권4호
• /
• pp.385-388
• /
• 1991

자란(B. striata)의 미성숙종자로 부터 유도한 embryogenic callus를 현탁배양하고 이와같은 embryogenic cell suspensions로부터 분리한 원형질체에 electroporation 방법을 사용하여 reporter genes이 들어있는 pBI121 plasmid DNA 를 도입하고 그 발현을 확인하였다. 배양된 세포에 있어서 GUS의 활성은 plasmid DNA양의 증가와 함께 높게 나타났으며, 200-300 voltage/1180 uF에서 GUS의 활성 및 원형질체의 생존율(viability)이 가장 좋았다.

• 태양에너지
• /
• 제2권1호
• /
• pp.9-16
• /
• 1982

The problem of transient laminar natural convection in compressible fluid in a rectangular enclosure is considered. The upper and lower boundaries of the enclosure are thermally insulating and the side boundaries are maintained at fixed temperatures. The fluid is considered to be a perfect gas with constant viscosity and thermal conductivity and the formulation differs from the boussinesq simplification in that the effects of variable density are completely retained. The motions are restricted to two dimensions. For incompressible fluid, the natural convection is driven mainly by buoyancy force. But the solutions show that for compressible fluid, the natural convection is driven by pressure and buoyancy forces and the thermally induced motion is acoustic in nature.

• Journal of Pharmaceutical Investigation
• /
• 제36권4호
• /
• pp.223-229
• /
• 2006

[ $PGE_1$ ]-ethyl ester intraurethral solutions were prepared in ethanol/propylene glycol mixture with penetration enhancer and viscosity-enhancing agent. The stability of $PGE_1$-ethyl ester in intraurethral solution was investigated at various temperature. Simultaneous determination of $PGE_1$-ethyl ester and $PGE_1$ was performed using a validated HPLC technique. In pentobarbital anesthetized cats, increase in intracavernous pressure(ICP), increase in penile length and duration of erectile response were determined after intraurethral application of $PGE_1$-ethyl ester solutions. $PGE_1$-ethyl ester solutions, when instilled into the eyes of rabbits, produces no noticeable irritation, or slight transient conjunctival irritation. From these results, ocular irritation of this solutions was judged as practically non-irritating. The stability study indicates that the therapeutically effective content in solution is well maintained for 46 weeks or longer when they are stored at $4^{\circ}C$. After intraurethral application of $PGE_1$-ethyl ester, ICP was increased and penile erection was induced. $PGE_1$-ethyl ester intraurethral solutions for erectile dysfunction could be developed and evaluated by employing feline erection model.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.293-302
• /
• 2005

In this paper, the thick-walled laminated, orthotropic as well as bimaterial, composite hollow spheres under impact pressure are analyzed in detail by using the semi-discrete finite element method with the Houbolt time-integration scheme which results in unconditionally stable transient numerical results. Numerical results are obtained by using the self-constructed spherically symmetric (one-dimensional) and axially symmetric (two-dimensional) finite element programs, and compared with the previous solutions by other researchers, being shown some of which are incorrect. The finite element package Nastran is also adopted for numerical comparison.

• 대한기계학회논문집A
• /
• 제29권4호
• /
• pp.578-583
• /
• 2005

This paper introduces a fast Fourier transform (FFT)-based spectral dynamic analysis method for the transient responses as well as the steady-state responses of the linear discrete systems subject to non-zero initial conditions. The forced vibration of a viscously damped three-DOF system is considered as the illustrative numerical example. The proposed spectral analysis method is evaluated by comparing its results with the exact analytical solutions and the numerical solutions obtained by the Runge-Kutta method.

• Journal of Mechanical Science and Technology
• /
• 제16권3호
• /
• pp.395-402
• /
• 2002

This paper shows how to formulate the transient analysis of 2-dimensional Hagen-Poiseuille flow using smoothed particle hydrodynamics (SPH). Treatments of viscosity, particle approximation and boundary conditions are explained. Numerical tests are calculated to examine effects caused by the number of particles, the number of particles per smoothing length, artificial viscosity and time increments for 2-dimensional Hagen-Poiseuille flow. Artificial viscosity for reducing the numerical instability directly affects the velocity of the flow, though effects of the other parameters do not produce as much effect as artificial viscosity. Numerical solutions using SPH show close agreement with the exact ones for the model flow, but SPH parameter must be chosen carefully Numerical solutions indicate that SPH is also an effective method for the analysis of 2-dimensional Hagen-Poiseuille flow.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.617-624
• /
• 1997

This Paper Presents an effective and simple procedure for the simulation of the motion of the solid-liquid interfacial boundary and the transient temperature field during phase change process. To accomplish this purpose, an iterative implicit solution algorithm has been developed by employing the dual reciprocity boundary element method. The dual reciprocity boundary element approach provided in this paper is much simpler than the usual boundary element method applying a reciprocity principle and an available technique for dealing with domain integral of boundary element formulation simultaneously. The effectiveness of the present analysis method have been illustrated through comparisons of the calculation results of an example with its semi-analytical or other numerical solutions where available.

• 대한조선학회지
• /
• 제12권1호
• /
• pp.9-22
• /
• 1975

As a second step of a thermal stress analysis in a watertight bulkhead plate during welding of a spool type penetration piece, is idealized as a thin circular disk with a clamped boundary. The exact solution for the transient temperature distribution and associated quasi-static thermal stresses which arise in a circular disk subjected to an instantaneous point source of heat acting in its interior has been obtained. And the solutions have been extended to the case of moving source of heat with the aid of the Duhamel's superposition integral and the results finally derived have been compared with the other results from the typical cases. The solutions can be applied to the problem such as a welding of a penetration piece on the watertight bulkhead and also applicable to the problems which occur in cutting or welding.

• 대한조선학회지
• /
• 제12권1호
• /
• pp.1-8
• /
• 1975

As a first step of a thermal stress analysis in a watertight bulkhead plate during welding of a spool type penetration piece, the bulkhead plate has been idealized as infinite plate with a circular hole. The exact solution for the transient temperature distribution and the associated quasi-static thermal stress which arise in a infinite plate subjected to an instantaneous point source of heat acting on the periphery of the circular hole. And the solutions have been extended to the case of a moving heat source with the aid of the Duhamel's superposition integral. The solutions can be applied to the problems such as a circular cutting or welding of a plate.