• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.1
• /
• pp.25-30
• /
• 2020

Three-phase multi-layer high temperature superconducting coaxial (TPMHTSC) cable is being actively studied due to advantages such as the reduction of the amount of superconducting wire usage and the miniaturization of the cable. The electrical characteristics of TPMHTSC cables differ from those of conventional superconducting cables, so sufficient analysis is required to apply them to the actual system. In this paper, the authors modeled 22.9 kV, 60 MVA TPMHTSC cable and analyzed the transient characteristics using a PSCAD/EMTDC-based simulation. As a result, when a fault current flows in TPMHTSC cable, most of the fault current is bypassed through the copper former layers. At this time, the total cable temperature increased by about 5 K. Through this study, we can verify the reliability of the TPMHTSC cable against the transient state, and it can be helpful for the practical application of the cable in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.482-487
• /
• 2014

This study is to investigate the effects of testosterone on adipogenesis and its molecular mechanism using RT-PCR analysis and transient transfection assays. Castrated(CAST) mice treated with testosterone had lower white adipose tissue weights and expression of adipocyte-specific genes($PPAR{\gamma}$ and aP2) than CAST control mice. Consistent with the in vivo data, testosterone treatment inhibited triglyceride accumulation and expression of adipocyte-specific genes($PPAR{\gamma}$ and aP2) in differentiated 3T3-L1 cells compared with control group. Testosterone-activated androgen receptor(AR) repressed the luciferase reporter gene activity induced by $PPAR{\gamma}$ transfection. Thus, these results suggest that testosterone downregulates the actions of $PPAR{\gamma}$ on adipogenesis through AR.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.815-818
• /
• 1998

The Insulated Gate Bipolar Transistor has the characteristics of MOSFET and BJT. The characteristics of proposed device exhibit high speed switching, the voltage controlled property, and the low ON resistance. This hybrid device has been used and developed continuously in the power electronic engineering field. We can simulate many IGBT circuits, such as the motor drive circuit, the switching circuits etc, with PSpice. However, some problems in PSpice is that the IGBT is old-fashioned and is very difficult to get it. In this paper, the IGBT in PSpice is considered as the basic structure. We changed the valuse of base width, gate-drain overlaping area, device area, and doping concentration, then calculated MOS transconductance, ambipolar recombination lifetime etc. Using this resultant parameter, we could predict the transient response characteristicsof IGBT, for examplex, voltage overshoot, the rising curve of voltage, and the falling curve of current.

• Journal of the Korean Ceramic Society
• /
• v.42 no.1
• /
• pp.11-15
• /
• 2005

The configuration of the main components and the physical structure of the Taguchi sensor, the first ceramic gas sensor mass produced, has remained virtually unaltered since its appearance 40 years ago. This device owns an excellent combination of the quality factors but is non-selective. The research efforts carried out to enhance the selectivity in this resistive gas sensor are briefly reviewed. A novel design, Capillary-attached Gas Sensor (CGS), is introduced, which employs the same ceramic components used for the fabrication of a classical Taguchi sensor but in altered geometries. CGS presents remarkable advantages from the view point of selectivity over the original design. While the steady state response of a CGS has the same significance as that of the Taguchi sensor, its transient response presents valuable diagnostic information. Fabrication and test of a prototype CGS is reported.

• Journal of the Korean Magnetic Resonance Society
• /
• v.18 no.1
• /
• pp.1-4
• /
• 2014

It is generally understood that protein-protein interactions proceed via transient encounter complexes that rapidly evolve into the functional stereospecific complex. Direct detection and characterization of the encounter complexes, however, been difficult due to their low population and short lifetimes. Recent application of NMR paramagnetic relaxation enhancement first visualized the structures of the encounter complex ensemble, and allowed the characterization of their physicochemical properties. Further, rational protein mutations that perturbed the encounter complex formation provided a clue to the target search pathway during protein-protein association. Understanding the structure and dynamics of encounter complexes will provide useful information on the mechanism of protein association.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.78-81
• /
• 2003

In this paper, we analyze the transient electromagnetic response from three-dimensional dielectric bodies using a time-domain PMCHW (Poggio, Miller, Chang, Harrington, Wu) formulation. The time-domain unknown coefficients of the equivalent currents are approximated by a set of orthonormal basis functions that are derived from the Laguerre polynomials. Numerical results computed by the proposed method are presented.

• Steel and Composite Structures
• /
• v.8 no.3
• /
• pp.201-216
• /
• 2008

The Eurocode system provides limited information regarding the structural fire design of external steel structures. Eurocode 1 provides thermal action for external member but only in steady-state conditions. On the other hand, Eurocode 3 provides a methodology to determine heat transfer to external steelwork, but there is no distinction in cross section shapes and, in addition, the calculated temperature distribution is assumed to be uniform in the cross section. This paper presents the results of a research carried out to develop a new transient heat transfer model for external steel elements to improve the current approach of the Eurocodes. This research was carried out as part of the project EXFIRE "Development of design rules for the fire behaviour of external steel structures", funded by the European Research Programme of the Research Fund for Coal and Steel (RFCS).

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2616-2618
• /
• 2005

Time-frequency analysis (TFA) method was applied to identify the integrity of the internal local surface of a pipe where some chemical corrosions are likely to occur by acid mixed in the coolant of nuclear power plants. The spalling out of internal material pieces by corrosion induces some transient signals and the change of structural vibration of a local point in the pipe. It is therefore possible to detect the corrosion detachment through the measurement of the transient acoustic signals or the vibration signals. In this presentation, the TFA was configured on the vibrational signal data of the pipe and it is identified that the TFA can Provide an important information, i.e., the amplitude fluctuations in the instantaneous frequency of each characteristic frequency.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.4 no.4
• /
• pp.253-262
• /
• 1992

A numerical procedure is introduced to calculate local ventilation effectiveness using the definitions of local decay rate and local mean age. A low Reynolds number $k-{\varepsilon}$ model is implemented to calculate steady state turbulent velocity distributions, and a step-down method is used to calculate transient concentration distributions. Simulations are carried out for several different values of air change rates and several different diffuser angles in a two-dimensional model of a half scale office room. The results show that the local ventilation effectiveness within a room could vary significantly from one location to another. The nominal air change rate based on the assumption of complete mixing of room air does not provide the local ventilation effectiveness information. It is numerically proved that the local mean age distribution obtained from the transient calculation is equivalent to the steady state concentration distribution with homogeneously distributed contaminant sources.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.885-886
• /
• 2008

This paper presents a reference template design method for frame-based classification of underwater transient signals. In the proposed method, framebased feature vectors of each reference signal are clustered by using LBG clustering algorithm to reduce the number of feature vectors in each class. Experimental results have shown that drastic reduction of the reference database can be achieved while maintaining the classification performance with LBG clustering algorithm.