• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2352-2356
• /
• 2008

Heat transfer and performance characteristics have been investigated for a rectangular wavy duct with dimple or protrusion arrays. The test duct was 15mm in height and 105mm wide. The print diameter of the dimple/protrusion wall was 12.99mm and the depth/height of the dimple/protrusion was 3.75mm. Local heat transfer coefficients on the dimple/protrusion wall were measured using a transient TLC technique. The Reynolds number was varied from 3,000 to 10,000. For the wavy duct tested in this study, adverse static pressure characteristics occurred at turning region of the wavy duct due to secondary flows. For the wavy duct with protrusion array, higher heat transfer enhancement level of 7.4 times than smooth straight case in maximum was obtained at low Reynolds number due to the high heat transfer enhancement by vortex flows. Also, the protrusion array increased the performance level of 3.0 at low Reynolds number of 3,000.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.33.2-33.2
• /
• 2005

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.22-29
• /
• 2006

Gas turbine engine among Principal internal combustion engines has been mainly applied as an aero and industrial Power plant. In order to increase its thermal efficiency. it has been raised their pressure ratio of compressor and the turbine inlet temperature. To operate above the limit temperature of turbine material, turbine nozzle vanes should be cooled. For this the cooling air is bled from the compressor section of 9as turbine. Meanwhile, to keep high thermal efficiency of 9as turbine, turbine vanes are to be cooled by using small cooling air Therefore, the complex cooling passages are requested to be designed and evaluated the effectiveness of vane cooling by measuring turbine vane temperature. But it is very difficult or impossible for us to measure local turbine temperatures at actual temperature When local heat transfer coefficients are known these can be calculated, therefore this study has been investigated on obtaining these coefficients of turbine vane at room temperature using TLC.

• Microbiology and Biotechnology Letters
• /
• v.32 no.4
• /
• pp.347-351
• /
• 2004

Hydrolysis of manno-oligosaccharides and galactomannan was studied with the purified Bacillus subtilis WL-7 mannanase from recombinant Eschericoli. The predominant products of hydrolysis were mannose, mannobiose and mannotriose. The enzyme could hydrolyze $\beta$-1 A-linked manno-oligosaccharides larger than mannobiose, but was not active on mannobiose. When the mannanase hydrolyzed manno-oligo saccharides of degree of polymerization(DP) 4-6, it was more active on the substrate of higher DP. Based on analysis of transient reaction products by TLC, the enzyme was found to have a preference for internal $\beta$-IA-mannosidic linkages, which are the central mannosidic bond of mannotetraose and the two middle mannosidic bonds of mannopentaose. The $\beta$-l A-mannosidic bonds situated at the second and fourth positions from the nonreducing end of mannohexaose were preferenhydrolyzed by the mannanase. Locust bean gum(LBG) was enzymatically hydrolyzed with higher efficiency than guar gum, resulting that amount of reducing sugars was liberated more efficiently from LBG than guar gum with same activity of mannanase.