• Laser Solutions
• /
• v.2 no.1
• /
• pp.22-29
• /
• 1999

This work was carried out as a fundamental experiment to fabricate a Graded-Boundary Ni/Steel material using a laser beam. A Ni sheet was placed on a steel substrate, and then a series of high power $CO_2$ laser beams were irradiated on the surface in order to produce a homogeneous alloyed layer. The processing parameters were : 4 ㎾ laser power, 2m/min traverse speeds, -2mm defocuing, 17 l/min sheiding gas flow rates. The sequential repetition of the laser surface alloying treatment up to 4 times, resulted in about 5mm thick of fair compositional gradient systems. In order to determine the microstructure, phase and compositional profiles in this material, optical microscopy, XRD and EDS were used. The compositions varied from 66% to 0% for Ni and 34% to 100% for Fe in this material The microstructures were typical morphologies of rapid solidification and solid-state cooling. Since compressive stress was formed in the heat affected region due to martensitic transformation, while relative tensile stress was developed in the alloyed region, cracks were formed between the alloyed region and the substrate region.

• Journal of Information Processing Systems
• /
• v.14 no.5
• /
• pp.1293-1300
• /
• 2018

For the disadvantages of multi-scale geometric analysis methods such as loss of definition and complex selection of rules in image fusion, an improved multi-focus image fusion method is proposed. First, the initial fused image is quickly obtained based on the lifting stationary wavelet transform, and a simple normalized cut is performed on the initial fused image to obtain different segmented regions. Then, the original image is subjected to NSCT transformation and the absolute value of the high frequency component coefficient in each segmented region is calculated. At last, the region with the largest absolute value is selected as the postfusion region, and the fused multi-focus image is obtained by traversing each segment region. Numerical experiments show that the proposed algorithm can not only simplify the selection of fusion rules, but also overcome loss of definition and has validity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.240-243
• /
• 2002

In this paper, we propose a face region detection based on skin-color distribution and facial feature extraction algorithm in color still images. To extract face region, we transform color using general skin-color distribution. Facial features are extracted by edge transformation. This detection process reduces calculation time by a scale-down scanning from segmented region. we can detect face region in various facial Expression, skin-color deference and tilted face images.

• SUVANNABHUMI
• /
• v.9 no.2
• /
• pp.35-49
• /
• 2017

This paper will concentrate on how various particular Southeast Asian conditions created a distinct Southeast Asian cultural identity despite a very challenging geographical and historical diversity in the region. The paper will argue that Southeast Asians demonstrate an ability to adapt to changes and new values but also exhibit fatalism through a very high degree of passive acceptance to political and other changes that affect their society. The paper identifies a degree of environmental and geographical uniqueness in Southeast Asia that shapes context and gives rise to very distinct cultural traits. The historical transformation in the region brought about by colonialism and nationalism, combined with this geographical and political make-up of the region, had an immense impact on Southeast Asian society as it fostered adaptability. Finally, the political transitions brought about by various conflicts and wars that continued to affect the area in rapid succession all throughout the 20^th century likewise contributed immensely to a local Southeast Asian fatalistic response towards change. Historically, Southeast Asia demonstrated these socio-cultural responses to such an extent that these are argued to permeate the region forming a distinct aspect of Southeast Asian culture.

• The Plant Pathology Journal
• /
• v.20 no.2
• /
• pp.158-163
• /
• 2004

Chlorella is a eukaryotic microalgae which shares metabolic pathways with higher plants. These charac-teristics make chlorella a potential candidate for eukaryotic overexpression systems. Recently, a foreign flounder growth hormone gene was stably introduced and expressed in transformed Chlorella ellipsoidea by using a modified plant transformation vector that contains cauliflower mosaic virus (CaMV) 35S pro-moter and the phleomycin resistant Sh ble gene as a selection marker. In this study, this same vector was modified by incorporating a promoter and a 3' UTR region of the 33kDa peptide gene from a chlorella virus that was isolated in our laboratory. The 33kDa gene promoter was used to replace the 35S promoter and the 3' UTR was introduced to separate the target gene and downstream Sh ble gene. Three different chlorella transformation vectors containing human erythropoietin (EPO) gene were constructed. The mp335EPO vector consists of a promoter from the 33kDa peptide gene, whereas the mp3353EPO vector contains the same promoter from the 33kDa peptide gene and its 3' UTR. The mp35S33pEPO vector contains the 35S promoter and the 3' UTR from the 33 kDa peptide gene. There was no significant difference in the expression levels of EPO protein in chlorella cells transformed with either of three of the transformation vectors. These data indicate that the promoters from the chlorella virus are comparable to the most common CaMV 35S promoter. Furthermore, these data suggest that other promoters from this virus can be used in future construction of chlorella transformation system for higher expression of target proteins.

• BMB Reports
• /
• v.40 no.3
• /
• pp.404-411
• /
• 2007

Transformation of cantaloupes with the coat protein (cp) gene of papaya ringspot virus type W (PRSV-W), Thai isolate, was used to introduce virus resistance. Binary vectors containing either the full length coat protein coding region under control of the 35S CaMV promoter(pSA1175), or the inverted-repeat of a coat protein coding region (pSA1304), were constructed and used for Agrobacteriummediated transformation of cotyledonary explants of the cantaloupe cultivar Sun Lady. Four independent transgenic lines were obtained using pSA1304 and one using pSA1175. Integration of the PRSV-W cp gene into the genome of these transgenic lines was verified by PCR amplification, GUS assays and Southern blot hybridization. In vitro inoculation of these lines with PRSV-W revealed that whereas the line containing pSA1175 remained sensitive, the four lines containing pSA1304 were resistant. The presence of small RNA species, presumably siRNA, corresponding to regions of the viral cp gene in transgenic lines resistant to PRSV-W supports the involvement of post-transcriptional gene silencing in the establishment of resistance.

• Journal of Information Processing Systems
• /
• v.14 no.5
• /
• pp.1150-1166
• /
• 2018

This paper presents a physical storage design method for image access structures using transformation techniques of multidimensional file organizations in image information systems. Physical storage design is the process of determining the access structures to provide optimal query processing performance for a given set of queries. So far, there has been no such attempt in the image information system. We first show that the number of pages to be accessed decreases as the shape of the given retrieval query region and that of the data page region become similar in the transformed domain space. Using these properties, we propose a method for finding an optimal image access structure by controlling the shapes of the page regions. For the performance evaluation, we have performed many experiments with a multidimensional file organization using transformation techniques. The results indicate that our proposed method is at least one to maximum five times faster than the conventional method according to the query pattern within the scope of the experiments. The result confirms that the proposed physical storage design method is useful in a practical way.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.2 no.2
• /
• pp.75-82
• /
• 1990

A Wave transformation including wave breaking in shallow water region is a non-linear and discontinuous Phenomenon. Therefore, a so-called individual wave analysis (or a wave by wave analysis) rather than spectral approach seems to be adequate to investigate the wave transformation in such regions. In this study, a theoretical joint distribution of wave height, period and wave direction of zero-down crossing waves, which is required in the individual wave analysis in the shallow water region, is derived based on the hypothesis that sea surface is a Gaussian stochastic process and that a band-width of energy spectra is sufficiently narrow. The derived i oint distribution is found to be an effective measure to investigate characteristics of three-dimensional random wave field in shallow water through field measurements.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.1
• /
• pp.42-51
• /
• 1995

In order to establish a theoretical basis for the analyses of transient behaviors in stratified thermal storage tanks, analytical approaches to an improved one-dimensional model are made. In the present model the storage tank is treated as a finite region with an adiabatic tank exit, whereas it has been considered as a simple semi-infinite region previously. Application of the Laplace transformation and the Inversion theorem to the governing equations makes it possible to obtain an exact infinite-series solution, which is convergent only at sufficiently large time. Accordingly a complementary solution which is available for short times, i.e., the time range of this study is sought by an approximate method. The approximate solution which is rigorously validated through the examination of neglected terms in the solution procedure agrees quite well with the exact one. Moreover, it is simpler to use and more convenient to interpret the physical meaning of the solution. Comparison of the present solution with the previous ones shows relatively large difference near the tank bottom, which results from the more realistic boundary condition adopted in the present model. Some representative results by the approximate solution including effects of the Peclet number on temperature distrbutions are illustrated to show the utility of this study. In consequence, it is expected that the present results based on the improved model replace the foregoing ones as a new theoretical reference for studies of thermal stratification fields.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.4
• /
• pp.88-97
• /
• 1989

This paper proposes an efficient switch-box router which consists of two parts ; greedy poly-jog router and via minimizer. The greedy switch-box router of Luk, routes not only metal wires at horizontal tracks and poly-silicon wires at vertical tracks but also poly-siliocon wires ar horizontal tracks if necessary. The via minimizer reduces the number of vias and the wire length by fipping of each corner, parallel moving of wire segment, transformation metal into poly-silicon, and transformation poly-silicon into metal. The result is generated through the column-wise scan across the routing region. The expected time complexity is O(M(Nnet)). Where M, N, and Nnet are respectively the number of columns, rows, and nets in the routing region.