• 한국통신학회논문지
• /
• 제24권7A호
• /
• pp.1005-1015
• /
• 1999

본 논문에서는 BPSK (binary shift keying) 방식을 사용하고 IFFT (inverse fast Fourier transform)와 FFT를 이용하여 기저 대역 변조기 및 복조기를 디지털로 구현한 MC-CDMA (multi carrier-code division multiple access) 시스템과 동일한 비트오율 (bit error rate) 성능을 갖고, 계산량과 대역폭을 줄이는 IFFT/FFT 기반의 새로운 디지털 구현 알고리즘 및 제안된 알고리즘에 적용되는 등화기 구조를 제안한다. 제안된 방법은 2개의 N/2-point 실수신호를 N/2-point IFFT와 FFT를 이용하여 동시에 변환하고 다시 복원할 수 있는 변형된 FFT 알고리즘에 기반을 두고 있다. 제안된 방법의 성능은 부가성 백색 가우시안 잡음 채널과 주파수 선택적 페이딩 채널 하에서 equal gain combiner와 maximal ratio combiner 등화기에 의한 다이버시티를 이용하여 수신했을 경우에 대한 모의실험을 통해 확인하였다.

• 한국연소학회지
• /
• 제9권2호
• /
• pp.38-44
• /
• 2004

The evolution of incipient soot particles has been examined by high resolution electron microscopy (HRTEM) and elemental analyzer in ethylene-air inverse diffusion flames. Laser Induced Incandescence(LII) and laser scattering methods were introduced for examining the soot volume fraction and morphological properties in combustion generated soot qualitatively. Soot particles, collected by thermophoretic sampling, were analyzed by using HRTEM to examine the nano structure of precursor particles. HRTEM micrographs apparently reveal a transformation of condensed phase of semitransparent tar-like material into precursor particles with relatively distinct boundary and crystalline which looks like regular layer structures. During this evolution histories, C/H analysis was also performed to estimate the chemical evolution of precursor particles. The changes of C/H ratio of soot particles with respect to residence time can be divided into two parts: one is a very slowly increasing regime where tar-like materials are transformed into precursor particles (inception process) the other is an increasing region with constant rate where surface growth affects the increase of C/H ratio dominantly (surface growth process). These results provide a clear picture of a transition to mature soot from precursor materials.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1170-1180
• /
• 2009

Recently this country has carried out the coast reclamation centering on the west and south coast for effective practical use of a country, considering purchase of materials and environmental problem, most reclaiming work is processing to spoil reclamation which is easy to secure the amount of materials. In case of weak ground that is formed by spoil reclamation like this, initial moisture content is high, as slurry state that is rarely revealed ground strength, compressibility and water permeability have been shown nonlinear change by compaction progress. Analysis of weak ground is unreasonable because the existing Terzaghi compaction theory analyzes compaction fixed number to regular invariable number for prediction of compaction state. This study computes the relation with void ratio-effective pressure and void ratio-finite transformation which is the most basic matter to predict finite strain compaction state of the south coast spoil, and analyze the basic feature to predict compaction feature of the south coast spoil reclaimed ground.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.517-520
• /
• 2004

Concrete Filled steel Tube pipe structure is a rational type of structure that maximizes performance by combining the strong points of steel frame and concrete. In the structure, the confining effect of steel pipes increases the bearing power of infilled concrete and the strengthening of local bucking of steel pipes by infilled concrete increases the bearing power of members. and these result in the reduction of cross-sectional area and high transformation capacity. Moreover. the structure is economically efficient and widely applicable that it is used from super-high buildings to residential, business and apartment buildings. It enables the construction of multi-story buildings with long spans using columns of small cross-sectional area. In case of diaphragm, however, it is difficult to confirm the compactness of the closed inside of steel pipes. The present study examined the properties of super-high strength concrete over 80MPa by comparing it with 40MPa concrete through heat conductivity and length change tests based on a mixture ratio satisfying the mixture goal presented in the guideline for the design and construction of concrete-filled steel pipe structure. and evaluated the performance of super-high strength concrete according to the shape and size of the aperture ratio of diaphragm.

• Journal of Information Processing Systems
• /
• 제14권4호
• /
• pp.941-947
• /
• 2018

Since the amplitudes of spin echo train in nuclear magnetic resonance logging (NMRL) are small and the signal to noise ratio (SNR) is also very low, this paper puts forward an improved de-noising algorithm based on wavelet transformation. The steps of this improved algorithm are designed and realized based on the characteristics of spin echo train in NMRL. To test this improved de-noising algorithm, a 32 points forward model of big porosity is build, the signal of spin echo sequence with adjustable SNR are generated by this forward model in an experiment, then the median filtering, wavelet hard threshold de-noising, wavelet soft threshold de-noising and the improved de-noising algorithm are compared to de-noising these signals, the filtering effects of these four algorithms are analyzed while the SNR and the root mean square error (RMSE) are also calculated out. The results of this experiment show that the improved de-noising algorithm can improve SNR from 10 to 27.57, which is very useful to enhance signal and de-nosing noise for spin echo train in NMRL.

• Journal of Welding and Joining
• /
• 제22권1호
• /
• pp.77-82
• /
• 2004

The effect of bonding condition on tensile properties of joints diffusion bonded spheroidal graphite cast iron, FCD60 to Cr-Mo steel, SCM 440 was investigated. Diffusion bonding was performed with various temperatures, holding times, pressures and atmospheres. All tensile specimens were fractured at the bonding interface. The tensile strength and elongation was increased with increasing bonding temperature. Especially, tensile strength of joints bonded at 1123K was higher than that of a raw material, FCD60, and tensile strength of joints bonded at 1173K was equal to that of a raw material, SCM440, but elongation of all joints was lower than those of raw materials. There was little the effect of holding time on the tensile properties. In comparison with bonding atmosphere, the difference of tensile strength was not observed, but elongation of joint bonded at vacuum(6.7mPa and 67mPa) was higher than that of Ar gas. Higher the degee of vacuum, elongation increased. Tensile properties of diffusion bonds depended on microstructures of cast iron at the interface and void ratio. Microstructures of cast iron at interface changed with temperature, because decarburizing and interdiffusion at the interface occurs and transformation of austenite-1 ferrite + graphite occurs on the cooling process. The void ratio decreased with increasing temperature, especially, effected on the elongation.

• 한국식생활문화학회지
• /
• 제20권3호
• /
• pp.299-304
• /
• 2005

This study investigated the feasibility of the bread making process with the mixture of the functional rice flour. The bread was manufactured with 20, 30 or 40% functional rice flour with increasing and wheat flour. Gelatinization characteristics of the rice starch was examined by differential scanning calorimetry(DSC). Coated with soluble dietary fiber rice showed the highest gelatinization enthalphy among functional rices and other functional rices were similar to normal rice. in the viscosity point of view. generally the viscosity related to the addition ratio. The most viscose case was 30% Sangwhang rice but in fermented with monascus ruber rice case, viscosity was low even with 40% case because of the transformation of the starch granules. In sensory evaluation, the highest sensory scores for the uniformity of pore size and flavor were obtained when sangwhang rice flour content was 20%. The textual study was mainly focused on the hardness, cohesiveness, adhesiveness, springiness, chewiness. Textural characteristics of functional rice bread crumb bakedwith 20% coated with soluble dietary fiber rice, 20% sangwhang was low in hardness, chewiness and gumminess. Therefore, Sangwhang rice flour 20%, Monascous ruber 20% and Coated soluble dietary fiber rice 20% were considered to be the most suitable addition ratio for the rice breads.

• 대한금속재료학회지
• /
• 제50권6호
• /
• pp.419-425
• /
• 2012

The purpose of this research was to develop a low Ni austenitic cast iron through replacing Ni by Cu and Mn because they are cheaper than Ni. The effect of the Cu content (6-12 wt%) on the microstructure characteristics was investigated in Fe-3%C-16%(Ni+Cu+Mn) cast iron. Contrary to general effect of the Cu on cast iron, the result of the microstructure analysis indicated that bainite and cementite were formed in high Cu content (>8 wt%Cu). A crystallized Cu-solution (Cu-Mn) phase and MnS in the Cu-solution were formed. The quantity of those phases increased as the Cu content increased. Consequently, the high Cu content in the composition ratio (Ni+Cu+Mn=16%) caused the formation of Cu-Mn/MnS and those phases decreased the effect of Cu and Mn on austenite formation. For this reason, bainite and cementite were formed in high Cu content.

• Smart Structures and Systems
• /
• 제13권2호
• /
• pp.319-341
• /
• 2014

A family of smart tuned mass dampers (STMDs) with variable frequency and damping properties is analyzed under harmonic excitations and ground motions. Two types of STMDs are studied: one is realized by a semi-active independently variable stiffness (SAIVS) device and the other is realized by a pendulum with an adjustable length. Based on the feedback signal, the angle of the SAIVS device or the length of the pendulum is adjusted by using a servomotor such that the frequency of the STMD matches the dominant excitation frequency in real-time. Closed-form solutions are derived for the two types of STMDs under harmonic excitations and ground motions. Results indicate that a small damping ratio (zero damping is the best theoretically) and an appropriate mass ratio can produce significant reduction when compared to the case with no tuned mass damper. Experiments are conducted to verify the theoretical result of the smart pendulum TMD (SPTMD). Frequency tuning of the SPTMD is implemented through tracking and analyzing the signal of the excitation using a short time Fourier transformation (STFT) based control algorithm. It is found that the theoretical model can predict the structural responses well. Both the SAIVS STMD and the SPTMD can significantly attenuate the structural responses and outperform the conventional passive TMDs.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권5호
• /
• pp.453-460
• /
• 1997

In order to investigate the electrical conduction properties of polyethylene thin film for power cable with manufacturing methods, the thickness of specimen was the 30, 100[${\mu}{\textrm}{m}$] of LDPE and 200[${\mu}{\textrm}{m}$] of XLPE were manufactured. The experimental condition for conduction properties was measured until the breakdown occurs at temperature ranges from 30 to 110[$^{\circ}C$] and the electric field from 1$\times$10$^3$to 5$\times$10$^{6}$ [V/cm]. As for increase of temperature, the current density of LDPE was increased with constant ratio in low field, but changes with exponential function in high electric field. The tunnel current of pre-breakdown region is shifted toward low field as much as thermal excitation energy. At low electric field, the XLPE showed dominant electrical conduction properties by thermal excitation, and transformation of the electron was resisted by the crystal at high electric field.