• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.2
• /
• pp.18-28
• /
• 2008

In inverse acoustic problem with nearfield sources, it is important to separate multiple acoustic sources and to measure the position of each target. This paper proposes a new algorithm by applying MUSIC(Multiple Signal Classification) to the outputs of discrete wavelet transformation with sub-band selection based on the entropy threshold, Some numerical experiments show that the proposed method can estimate the more precise positions than a conventional MUSIC algorithm under moderately correlated signal and relatively low signal-to-noise ratio case.

• Journal of Korea Multimedia Society
• /
• v.7 no.12
• /
• pp.1745-1753
• /
• 2004

A method of estimating the pose of a three-dimensional object from a set of two-dimensioal images based on parametric eigenspace method is proposed. A Gaussian blurred edge image is used as an input image instead of the original image itself as has been used previously. The set of input images is compressed using K-L transformation. By comparing the estimation errors for the original, blurred original, edge, and blurred edge images, we show that blurring with the Gaussian function and the use of edge images enhance the data compression ratio and decrease the resulting from smoothing the trajectory in the parametric eigenspace, thereby allowing better pose estimation to be achieved than that obtainable using the original images as it is. The proposed method is shown to have improved efficiency, especially in cases with occlusion, position shift, and illumination variation. The results of the pose angle estimation show that the blurred edge image has the mean absolute errors of the pose angle in the measure of 4.09 degrees less for occlusion and 3.827 degrees less for position shift than that of the original image.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.388-393
• /
• 1988

New circuit D-Q transformation concept is introduced to analyze AC converters such as inverters, rectifiers and cyclo-converters with ease. The equivalent linear time invariant circuit is obtained by substituting switches with equivalent turn-ratio variable transformers and changing balanced AC reactors into equivalent DC reactors combined by gyrators. This circuit enables us to utilize the powerful linear system analysis techniques such as Laplace transform otherwise which could not be applied to the time varying switching systems. Direct substitution of switches of DC converters with transformers is shown as a preliminary. Then the modeling procedure is shown for a controlled rectifier-inverter circuit. Finally an analysis example is proposed for a buck-boost inverter and the result is compared with the conventional approach. This approach is applicable to all AC converter families to determine the AC transfer functions and the DC operating points. It is identified that the switching systems are equivalent to the RLC filter circuits with transformers and gyrators.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.6
• /
• pp.1013-1019
• /
• 1987

This paper proposes the four directional line segmentation method to transform the size of dot patterns such as character dot patterns, line drawings and so on, while maintaining the quality of original pattern. At the first, this method extracts three kinds of line segmentm, namely horizontal, vertical line and slant line, and then transforms dot patterns using the each rules which are appricable to each kind of extracted line segments. Our experimental results show that transformation of dot patterns can be succeed in good quality without implementing some kinds of smoothing processes, covering the continuous transforming ratio of 0.5 to N times.

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.2
• /
• pp.65-69
• /
• 2002

$Llo{\rightarrow}Ni_5Al_3$ reordering and related properties in Ni-Al alloys consisting of 64-65at%Ni are characterized by X-ray diffraction, shape memory effect and damping capacity. Formation of $Ni_5Al_3$ takes place by simple ordering of atoms with a continuous increase in c/a ratio. As a result, degradation of shape memory effect and damping capacity is observed after short time annealing at $200-300^{\circ}C$.

• Transactions of Materials Processing
• /
• v.8 no.3
• /
• pp.221-221
• /
• 1999

Warm deep drawability in a square cup drawing was investigated using a newly developed high-strength steel sheet with retained austenite that was transformed into martensite during formation. For this investigation, six different temperatures between room temperature and 250℃, and five different drawing ratios ranging from 2.2 to 2.6 were considered. The results showed that the maximum drawing force and the drawing depth were affected by the change in temperature, and a more stable thickness strain distribution was observed at elevated temperatures. However, blue shortness occurred at over 200℃. FEM analysis using the LS-DYNA code was used to compare the experimental results with the numerical results for the thickness strain distribution.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.8
• /
• pp.99-108
• /
• 1994

In this paper an image compression technique based on fractal theory using iterated contractive transformation is analysed and an improved image coder is suggested. Existing methods used the classifier proposed by Ramamurthi and Gersho which utilize the properties of neighboring pixels in the spatial domain. In this paper DCT-based classification is applied to 512$\times$512 images and PSNR improvement of 0.4~2.7 dB is obtained at lower bit rate over conventional algorithms. In addition the effect of varying the domain block size and quantization step size of the luminance shift parameter on the compression ratio and the image quality is compared and analysed.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.469-470
• /
• 2006

[ $TiO_2$ ] nanoparticle was synthesized by the flame method, which was controlled by varying the ratio and flow rate of gas mixtures consisting of oxygen (oxidizer), methane (fuel) and nitrogen (carrier gas). The crystalline phases of $TiO_2$ nanoparticle depended strongly on the temperature distribution in the flame, whereas the morphology was not sensitive. We proved that the anatase phase formed without the phase transformation in the flame and the rutile phase generated through several phase transformations.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.17 no.4
• /
• pp.473-488
• /
• 1988

This paper is concerned with the prediction of two dimensional turbulent flows in the parallel plate with the repeated cylindrical blockages. The purpose of this paper is to find the effect of the eccentricity and the pitch of the repeated cylindrical blockages on the flow field, heat transfer coefficients and friction factors. A special technique is developed for the solution of the fully developed turbulent recirculating flow, in which the flow field varies periodically. A non-othogonal coordinate transformation is employed to solve the momentum and the energy equations. The results show that the pitch ratio or the eccentricity of the repeated blockages become smaller, or the Reynolds number of the flow larger, friction factors and heat transfer coefficients increase.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.1-7
• /
• 2019

Previously, parallel computing was mainly used in areas requiring high computing performance, but nowadays, multicore CPUs and GPUs have become widespread, and parallel programming advantages can be obtained even in a PC environment. Various parallel programming frameworks using multicore CPUs such as OpenMP and PPL have been announced. Nvidia and AMD have developed parallel programming platforms and APIs for program developers to take advantage of multicore GPUs on their graphics cards. In this paper, we develop digital image transformation programs that runs on each of the major parallel programming frameworks, and measure the execution time. We analyze the characteristics of each framework through the execution time comparison. Also a constant K indicating the ratio of program execution time between different parallel computing environments is presented. Using this, it is possible to predict rough execution time without implementing a parallel program.