• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.281-292
• /
• 2019

This paper proposed a new technology to control a path forging parts in limited narrow space of manufacturing process automation for smart factory. In the motion control, we adapted the obstacle avoidance technology based on ultrasonic sensors. The new motion control performance test for a mobile robot is experimented in narrow space environments. The travelling path control is performed by a fuzzy control logic. which plays a role for selecting an appropriate behavior in accordance with the situation in the vicinity of the mobile robot. Ultrasonic sensors installed at the front face of the mobile robot are used. In order to update the current position and heading angle of the mobile robot, a new approch is adapted. The reliability is illustrated by simulation and experiments.

• 한국ITS학회 논문지
• /
• 제7권3호
• /
• pp.1-14
• /
• 2008

국내는 정보통신(IT) 기술의 발달을 기반으로 BIS, BMS, CNS 등을 통해 교통정보가 실시간적으로 제공되고 있어 유비쿼터스 기반의 첨단 통신기술이 정착되게 되면 개인의 취향에 적합한 맞춤형 (대중)교통정보가 가능할 것으로 전망된다. 대중교통 통행정보는 경로탐색알고리즘으로 구현되는데, 대중교통망은 일반 가로망과는 달리 환승과 운행시간 특성을 포함하며 통행자가 경로를 선택하는 과정에서 통행시간, 환승횟수, 환승시간과 같은 복수의 제약 또는 목적의 고려가 요구된다. 본 연구에서는 사용자에게 영향을 미칠 수 있는 요인들을 복수의 목적으로 고려하여 경로를 탐색하며 탐색된 경로에 대하여 자의적으로 선택해 나가는 기법을 제안한다 본 연구는 복합대중교통망을 대상으로 통행시간, 환승횟수, 환승시간등과 같은 통행목적에 대하여 계층별로 별도의 다목적 경로를 탐색하는 방안을 강구하여 계층별로 적용 가능한 사용자 맞춤형 정보제공체계의 기본적인 접근이론을 개발한다. 제안된 다수단, 다계층, 다목적 경로탐색알고리즘은 링크표지에 근거하여 구축되어 복합교통망에 효율적으로 구동할 수 있으며, 수도권 도시철도의 실제 대규모 교통망에 적용한 사례연구를 통하여 다양한 계층을 고려한 경로계획모형(Path Planning)으로 활용될 수 있는 가능성을 예시하였다.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.46-52
• /
• 2012

A PAEM(Pneumatic Active Engine Mount) system has been developed to improve NVH performance of a SUV in idle state. Control objective to attenuate the vibration of a vehicle should be determined prior to the design of control algorithm. This study presents the correlation analysis of output variables of PAEM system by means of TPA(Transfer Path Analysis) using experimental data obtained by vehicle test. The analysis results show that the vibration of vertical direction is more serious than those of longitudinal and lateral direction of the vehicle, and that the correlation between the vibration of front seat rail and that of steer wheel is highest. In conclusion, the vibrations of front seat rail and steer wheel in vertical direction should be considered as the control objectives of the PAEM.

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1837-1843
• /
• 1997

This study experimentally demonstrates the use of active muffler attached to the automotive exhaust system to reduce exhaust noise. For improving the signal to noise ratio in the process of estimation of secondary path transfer functions, the on-line algorithm that conventional inverse modeling is combined with adaptive line enhancer is used as the control algorithm. Active muffler is designed that the primary noise and the control sound are propagated as a plane wave in the outlet. Therefore, the error microphone could be placed out of the tail pipe center of a high temperature and the radiation noise to the outside could be reduced in the whole area around the outlet. The control experiment for reducing exhaust noise with active muffler is implemented during run-up at no load. From the experimental results presented, compared with the conventional off-line method, the proposed on-line method is capable to acquire a reduction of exhaust noise above 5 dB in overall sound power level.

• 한국소음진동공학회논문집
• /
• 제11권4호
• /
• pp.5-12
• /
• 2001

This paper presents the simulation methodology of the interior noise of vehicle using the frequency response function based hybrid modeling of the system which consists of multi-subsystem models obtained by the test or analysis. The complex systems such as a trimmed body of high modal density and a powertrain were modeled by using experimental data, and a sub-frame of a vehicle of low modal density was modeled by finite element data. Modeling of the whole system was executed and validated in the two stages. The first stave is combining the trimmed body and the sub-frame, and the second stage is attaching the powertrain, which is a exciting source, to the combined model of the first stage. The input force to the system was modeled as an equivalent force in the virtual space, which was obtained from impedance method using the FRFs of the powertrain and the responses. The interior noise predicted by the proposed method was very close to the direct measurement, which showed feasibility of the proposed modeling procedure. Since the methodology is easily applied to both the transfer path analysis of structure-borne noise and the analysis of noise contribution of a sub-system, it is expected to be a strong tool for design change of a vehicle in the earlier stare.

• 제어로봇시스템학회논문지
• /
• 제13권8호
• /
• pp.783-789
• /
• 2007

In this paper, firstly, we propose a generating method of the 3-D obstacle map using ultrasonic sensors. Secondly, we try to find the necessary stimulation conditions of compact tactile display device for effective transfer of obstacle information. The final goal of this research is the development of a walking guide system for the blind to walk safely. The walking guide system consists of a guide vehicle for the obstacle detection and a tactile display device for the transfer of the obstacle information. The guide vehicle, located in front of the walking blind, detects the obstacle using ultrasonic sensors. The processed information makes an obstacle map and transmits safe path and emergency situation to the blind by the tactile display. The tactile display device, located in the handle which is connected with the guide vehicle by cane, offers the processed obstacle information such as position, size, moving, shape of obstacle and safe path, etc. The concept of a walking guide system with tactile display is introduced, and experiments of 3-D obstacle detection and tactile perception are carried out and analyzed.

• 한국항해항만학회지
• /
• 제30권9호
• /
• pp.773-777
• /
• 2006

Significant increase of container flows in the marine terminals requires more efficient port equipments such as logistic and transfer systems. This paper presents collision avoidance and routing approach based on dynamic programming (DP) algorithm for a linear motor based shuttle car which is considered as a new transfer system in the port terminals. Most of routing problems are focused on automatic guided vehicle (AGV) systems, but its solutions are hardly utilized for LM based shuttle cars since both are mechanically different. Our proposed DP is implemented for real-time searching of an optimal path for each shuttle car in the Agile port terminal located at California in USA.

• Structural Engineering and Mechanics
• /
• 제63권3호
• /
• pp.293-302
• /
• 2017

This study deals with a numerical investigation of load transfer along interfaces of jacketed columns using finite element models. Appropriate plasticity and constitutive models are used to simulate the response of concrete and steel bars. Experimental data were used to calibrate the simulation of mechanical characteristics. The different compressive strength of core and jacket concrete, the confinement ratio, the dowels' diameter size and the load pattern shapes were considered. The path diagrams along the interfaces elucidate the areas around the dowel bars where due to stress concentration plastic hinges and intense discontinuities are created. The stress flow also depicts the contribution of confinement of the jacketed area to the overall resonant load capacity of the core column. The scope of the research is to identify and quantify the shear transfer along the interfaces of strengthened elements.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1306-1311
• /
• 2004

The performance test apparatus of liquid-phase plate heat exchanger was installed and the computer program for design was developed in this study. The detail temperature distribution of hot and cold fluids in each path of heat exchanger was calculated by numerical method and the correlation for the heat transfer coefficient was defined. The heat transfer coefficients were measured using the working fluids of water and glycerine to investigate the effect of fluid viscosity. The measured heat transfer coefficients were compared with the calculated values obtained from the computer program and it was shown that error of the calculated values was generally less than 5%.

• Transactions on Electrical and Electronic Materials
• /
• 제8권1호
• /
• pp.21-25
• /
• 2007

A two-dimensional TCAD MEDICI simulator was used to examine the voltage transfer characteristics, on-off switching properties and latch-up of a CMOS inverter as a function of the n-channel length and doping levels. The channel in a LDMOSFET encloses a junction-type source and is believed to be an important parameter for determining the circuit operation of a CMOS inverter. The digital logic levels of the output and input voltages were analyzed from the transfer curves and circuit operation. The high and low logic levels of the input voltage showed a strong dependency on the channel length, while the lateral substrate resistance from a latch-up path in the CMOS inverter was comparable to that of a typical CMOS inverter with a guard ring.