• 전력전자학회논문지
• /
• 제27권6호
• /
• pp.455-463
• /
• 2022

This study proposes a receiving pad identification coil for wireless charging of electric vehicles. The proposed coil identifies the shape of the receiving pad through magnetic coupling with the receiving pad. Therefore, the shape of the coil is designed to show the different magnetic properties of each receiving pad. The accuracy of this design is verified through finite element method simulation. Furthermore, the operation method of the secondary pad identification circuit is described, and the appropriate magnitude and length of the pulse voltage applied to this circuit for receiving pad identification are derived through simulation. The performance of the proposed identification coil set is verified by the experimental results.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권7호
• /
• pp.696-701
• /
• 2015

본 연구에서는 깊이 0.2 mm, 폭 0.45 mm, 길이 60mm 그리고 채널의 개수는 15개인 마이크로 채널에서 이상 유동비등에 관한 실험을 수행하였다. 작동유체로는 FC-72가 사용되었으며, 실험은 질량유속과 열유속 각각 $200-400kg/m^2s$, $5-40kW/m^2$ 범위와 증기 건도 0.1-0.9 범위에서 수행되었다. 열전달 계수는 낮은 열유속에서는 급격하게 감소하였으며, 일정 열유속 이상에서는 거의 일정하게 유지되었다. 측정된 열전달 계수로부터 기존의 방법을 이용하여 기포류, 슬러그류, 천류 그리고 파형/환상류의 유동양식으로 분류하였다. 또한 분류한 유동양식의 결과를 파형/환상류 영역으로의 천이 기준과 비교하였다. 하지만 기존의 천이 기준으로는 본 연구의 실험결과를 만족스럽게 예측하지 못하였다.

• 한국지반공학회논문집
• /
• 제23권11호
• /
• pp.49-58
• /
• 2007

침투그라우팅시 미세입자의 이동 메카니즘과 미세입자들의 간극 충진 후 강도증가 상태를 파악하기 위해 PFC3D를 이용한 수치해석을 수행하였다. 해석을 위하여 업스케일링 기법을 이용하였으며 연구를 통해 다음과 같은 사실들이 관찰되었다. 첫째, 토층 입자에 대한 그라우팅 미세 입자의 상대적 크기가 0.05배에서 0.25배로 증가하면서 입자의 이동이 제한을 받게 된다. 특히, 0.20배 또는 0.25배의 그라우팅 미세입자의 경우, 토층 입자들 간의 공극이 하나 또는 다수의 미세입자들에 의해 막히기 때문에 미세입자의 이동이 거의 없다. 또한 0.05배와 0.10배의 경우, 입자의 이동량이 거의 유사하므로 입자 크기가 감소되어도 그라우팅 효과의 증진은 한계가 있다. 둘째, 침투그라우팅 전과 후의 수치시료에 대한 물성 실험을 한 결과 점착력과 마찰계수가 증가함이 확인되었다.

• 한국의류학회지
• /
• 제30권1호
• /
• pp.157-166
• /
• 2006

The human body, which is composed of concave and convex curvatures, makes it difficult to transfer into 2D patterns directly from 3D data. In previous studies. Jeong, et al.(2004) suggested the block method was fester and easier when dealing with the triangular patches of male's upper dress form. Although the block method is useful to make a pattern, the information(area, length, etc.) from a 2D pattern would be different depending on the direction of the block method. As a result horizontal and diagonal block methods were suggested as optimal methods for 2D tight-fitting patterns. These block methods were closer to the original area of the 3D scan data than the vertical block method. The total area of the 2D pattern obtained by the horizontal and diagonal block methods showed little differences. In case of the horizontal and diagonal block methods, the total error of the 2D pattern area ranged from $0.01\%\~0.25\%$. In comparing the length of the 2D pattern with that of the 3D scan data, the obtained 2D pattern was $0.1\~0.2cm$ shorter than the 3D scan data, which was within the acceptable range of errors in making clothes. 3D space distribution images between the body surface and the experimental clothing were also measured and $3\%$ enlargement of the original pattern was verified as the adequate adjustment.

• 한국수정란이식학회지
• /
• 제31권3호
• /
• pp.249-254
• /
• 2016

It is imperious to know the reproductive parameters of the subsisting swine breed for profitable farming in Bangladesh. This study was designed to compare the reproductive parameters of sows at hilly areas between the local and crossbred at farm and backyard level. A total of 116 breedable sows were included. The data on age at puberty, litter size, birth weight, weaning weight, gestation length, interval between farrowing and number of piglets born per sow in local and crossbred sows were determined and direct questionnaire method was used for data collection. The present study revealed that age at puberty between farm and backyard system of crossbred sows was $8.88{\pm}0.153$ and $9.85{\pm}0.221$ months, respectively. The farrowing interval was shorter in crossbred sows which were kept in farming system rather than backyard system. The interval between farrowing and onset of estrus was shorter in crossbred sows. The gestation length was almost similar between backyard and farm condition. The number of litter size per sow per farrowing was $8.45{\pm}0.41$ in crossbred and $7.17{\pm}0.250$ in local pigs at backyard system. The birth weight and weaning weight were more in farm conditions than backyard system. The age at puberty in local breed was lower than the crossbred and litter size was $8.45{\pm}0.407$ in crossbred which was higher than local breed $7.17{\pm}0.250$ in backyard system. These results suggest that reproductive parameters of local sow need to be improved for better production and crossbred sows should be reared for obtaining desired productivity.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권7호
• /
• pp.339-345
• /
• 2000

This paper deals with the displacement estimation of magnetically suspended simple 1 DOF(degree of freedom) system without the displacement sensor. Inherently electro-magnet for control has two natural feedback loops. One is the transfer function which represents the dependance of the amount of the magnetic flux on the gap displace-ments. The other is the transfer function expressing the properties that the back electromotive force is derived from the time derivative of the magnetic flux. Through these two feedback loops, information about the gap length can be represented by the magnetic flux and the coil current. This means that the gap length can be detected from these two states variables of the electromagnet without a displacements sensor(self-sensing). The displacement can be estimated with the magnetic flux subtracted by the coil current. In this paper we use a balance beam in order to deal with the displacement sensorless estimation of the magnetic bearing system. For the stable estimation of the gap displacements by using the method of self-sensing simple PD controller is used. We first show the mathematical model of the balance beam, and then we show the effectiveness of the current and flux feedback for making stable estimation of the gap displacements for the balance beam. Simulation results show the effectiveness of the current and flux feedback for good estimation of the displacement without using displacement sensor.

• 대한토목학회논문집
• /
• 제28권5A호
• /
• pp.747-756
• /
• 2008

본 논문에서는 전달길이에 영향을 미치는 인자에 따라 프리텐션 부재가 받는 동적 충격에 의한 영향을 실험적으로 고찰하였다. 이를 위해 긴장재의 직경, 콘크리트의 피복 두께, 구속 철근과 비부착 구간의 유무, 긴장력 도입 방식을 변수로 한 10개의 프리텐션 콘크리트 부재를 제작하고, 긴장재에 부착한 전기 저항식 변형률 게이지를 통하여 부재에 긴장력 도입 시 변형률 변화를 동적으로 측정하였다. 실험 결과, 순간 전달 방식으로 긴장력을 도입할 때 절단단부에서 큰 동적 효과가 발생하는 것을 확인할 수 있었다. 또한, 변형률 변화량으로 각 부재의 긴장력을 비교한 결과, 각 인자에 따라 차이가 존재하는 것을 확인했다. 직경 15.2 mm 강선보다 12.7 mm 강선의 잔류 긴장력 비율이 더 컸으며, 75 mm의 콘크리트 피복 두께만으로도 충분한 구속 효과를 기대할 수 있는 것으로 판단된다. 구속 철근의 영향은 미미했고, 비부착 구간의 영향으로 잔류 긴장력이 향상되었다. 순간 전달 방식보다 지연 전달 방식으로 긴장력을 도입할 때 긴장력 손실이 적은 것으로 확인되었다.

• 대한치과보철학회지
• /
• 제34권3호
• /
• pp.501-532
• /
• 1996

This study investigated the effects of cantilever length, location and load condition on stress distribution developed in the implants, prostheses and supporting tissues. The osseointegrated prostheses with two 10mm Branemark implants at 2nd premolar and 1st molar sites with cantilever extensions at 1st premolar, 2nd and 3rd molar sites were constructed. Under 100N, 200N of vertical and $45^{\circ}$ oblique loads at the cantilever pontics, stress distribution patterns and displacement were analyzed with three dimensional finite element method. The results were as follows : 1. The stress was concentrated at the joint of the cantilever pontic and implant superstructure, the neck of implant and the ridge crest near the cantilever But there was little load transfer to the lower supporting tissues of implants. 2. The implant near the cantilever was displaced inferiorly while the implant far from the cantilever was displaced superiorly. In horizontal direction the implants were displaced to the direction where the loads were applied, except the apexes of the implants. 3. In case of anterior cantilever, the stress and displacement were higher than the prosthesis connected with natural tooth. 4. The stress developed in the posterior cantilevered type was higher than in the anterior cantilevered type. The greastest stress was concentrated at the ridge crest near the posterior cantilever. 5. The longer the cantilever, the more the stress was developed and was concentrated at the joint of the cantilever pontic and implant superstructure. 6. Under oblique load, the stress was concentrated at the necks of implants and the ridge crests, but decreased at the joint of the cantilever pontic and implant superstructure than under vertical load.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1421-1430
• /
• 2022

The computation of the solid angle and the detector efficiency is considering to be one of the most important factors during the measuring process for the radioactivity, especially the cylindrical γ-ray NaI(Tl) detectors nowadays have applications in several fields such as industry, hazardous for health, the gamma-ray radiation detectors grow to be the main essential instruments in radiation protection sector. In the present work, a generic numerical simulation method (NSM) for calculating the efficiency of the γ-ray spectrometry setup is established. The formulas are suitable for any type of source-to-detector shape and can be valuable to determine the full-energy peak and the total efficiencies and P/T ratio of cylindrical γ-ray NaI(Tl) detector setup concerning the truncated conical radioactive source. This methodology is based on estimate the path length of γ-ray radiation inside the detector active medium, inside the source itself, and the self-attenuation correction factors, which typically use to correct the sample attenuation of the original geometry source. The calculations can be completed in general by using extra reasonable and complicate analytical and numerical techniques than the standard models; especially the effective solid angle, and the detector efficiency have to be calculated in case of the truncated conical radioactive source studied condition. Moreover, the (NSM) can be used for the straight calculations of the γ-ray detector efficiency after the computation of improvement that need in the case of γ-γ coincidence summing (CS). The (NSM) confirmation of the development created by the efficiency transfer method has been achieved by comparing the results of the measuring truncated conical radioactive source with certified nuclide activities with the γ-ray NaI(Tl) detector, and a good agreement was obtained after corrections of (CS). The methodology can be unlimited to find the theoretical efficiencies and modifications equivalent to any geometry by essential sufficiently the physical selective considered situation.

• 한국지반공학회논문집
• /
• 제25권9호
• /
• pp.5-17
• /
• 2009

재하 하중에 의해 압밀 되는 지반에 관입 된 말뚝의 지지력을 예측하고자 MATLAB을 이용한 GUI환경에서 Pile NSF(Pile Negative Skin Friction)프로그램이 개발되었다. 본 연구에서 제안된 방법은 일차원 유한변위 압밀이론이 적용될 수 있도록 비선형 하중 전이법에 의한 일차원 토질-말뚝 모델 프로그램인 OpenSees 를 확장하였다. 개발된 프로그램은 압밀과정 중에 발생하는 토질-말뚝의 경계면 변화는 물론 유한 점토층의 저감이 고려되는 Mikasa의 유한변위이론을 융합하는 특성을 가지고 있다. 더 나아가 말뚝 타설 후에 재하성토에 의해 발생하는 지반의 압밀상태도 해석시에 고려할 수 있는 특징을 지니고 있다. 본 연구에서 제안된 방법에 의한 프로그램 해석은 부마찰력이 발생하는 말뚝에 대하여 말뚝 장기시험 사례 결과와 비교하여 타당성이 검증되었고, 압밀침하를 반영한 말뚝의 부마찰력 예측치는 측정된 결과와 잘 일치하고 있음을 보여주고 있다.