• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.217-219
• /
• 2006

This study focused an water quality response to land-based pollution loads and the appropriate pollutant load reduction in Chinhae Bay using an eco-hydrodynamic model. Land-based discharge foam urban areas, industrial complex and sewage treatment plant was the greatest contributor to cause red-tide blooms and summer hypoxia. Tidal currents velocity af the ebb tide was about 10 cm/s stronger than that of the flood tide. A residual current was simulated to. have a slightly complicated pattern with ranging from 0.1 to. 2.7 cm/s. In Masan Bay, pollutant materials cannot flaw from the inner to the outer bay easily because af residual currents flaw southward at surface and northward at the bottom. The simulation results of COD distribution showedhigh concentrations aver 3 mg/L in the inner part of Masan Bay related pollutant discharge, and charge, and lower levels less than 1.5mg/L in the central part of Chinhae Bay. For improvement water quality in Chinhae Bay, it is necessary to reduce the organic and inorganic loads from paint sources by mare than 50% and ameliorate severe polluted sediment.

• Environmental Analysis Health and Toxicology
• /
• v.20 no.2 s.49
• /
• pp.167-178
• /
• 2005

This study was carried out to evaluate the temporal, spatial, and seasonal variations of VOC, and to characterize the VOC concentrations in two large industrial complexes located in Pohang and Gumi cities. Twenty -four hours continuous sampling of selected VOC was made with STS 25 sequential tube samplers and double-bed adsorbent tubes. Air samples were collected every three hour interval for 7 consecutive days in each site during summer and winter. VOC were determined by thermal desorption coupled with GC/MS. A total of 27 VOCs of environmental concern were determined, including aliphatic, aromatic and halides. Generally. concentrations of toxic VOC were higher in Gumi than Pohang, and VOC levels in industrial areas were typically several-fold higher than those in residential areas. The most abundant VOC appeared to be toluene for both cities. However, chlorinated VOC were higher in Gumi than Pohang, while aromatic VOC were more abundant in Pohang than in Gumi. Two cities showed relatively different variations of VOC concentrations within a day. It is likely that traffic related sources are major factors affecting the VOC in Pohang, and industrial solvents usages are important sources in Gumi. These results imply that the occurrence and levels of atmospheric VOC are strongly dependent on the type of industries in each city. Therefore, in order to develop any control strategies or to establish the priority rankings for VOC in large industrial complexes, the type of industries and the occurrence of VOC in the atmosphere should be taken into consideration.

• Particle and aerosol research
• /
• v.7 no.1
• /
• pp.21-30
• /
• 2011

The spatial distributions of air pollutants, in particular, ultrafine particles near traffic congestion roads at urban areas need to reduce human exposure levels for protecting public health. In this study, the number concentrations of ultrafine particles larger than 5 nm were measured every second during driving on the major roads of Nowon-gu, Seoul for 1.6 h using a mobile emission laboratory on October 5, 2010. The ultrafine particle number concentrations ranged from 7,009 to $265,600particles/cm^3$ with an average of $55,570particles/cm^3$, and these levels were comparable to concentrations of ultrafine particles larger than 3 or 7 nm on the arterial roads at urban areas in Los Angeles, USA and Zurich, Switzerland. It was frequently observed that the ultrafine particle number increased rapidly when vehicle speed was accelerated and it decreased sharply when vehicle speed was decelerated. The high peak events of ultrafine particle concentration larger than $200,000particles/cm^3$ were observed seven times during the measurement period. From the three repeated measurements during the short period of 50 min, it was concluded that the ultrafine particle number concentration on the road was significantly time-dependent. This on-road measurement approach can be utilized to manage vehicle-related air pollution in urban.

• Advances in aircraft and spacecraft science
• /
• v.3 no.3
• /
• pp.243-257
• /
• 2016

The increase of air traffic volume has brought an increasing amount of issues related to carbon and NOx emissions and noise pollution. Aircraft manufacturers are concentrating their efforts to develop technologies to increase aircraft efficiency and consequently to reduce pollutant discharge and noise emission. Ultra High By-Pass Ratio engine concepts provide reduction of fuel consumption and noise emission thanks to a decrease of the jet velocity exhausting from the engine nozzles. In order to keep same thrust, mass flow and therefore section of fan/nacelle diameter should be increased to compensate velocity reduction. Such feature will lead to close-coupled architectures for engine installation under the wing. A strong jet-wing interaction resulting in a change of turbulent mixing in the aeroacoustic field as well as noise enhancement due to reflection phenomena are therefore expected. On the other hand, pressure fluctuations on the wing as well as on the fuselage represent the forcing loads, which stress panels causing vibrations. Some of these vibrations are re-emitted in the aeroacoustic field as vibration noise, some of them are transmitted in the cockpit as interior noise. In the present work, the interaction between a jet and wing or fuselage is reproduced by a flat surface tangential to an incompressible jet at different radial distances from the nozzle axis. The change in the aerodynamic field due to the presence of the rigid plate was studied by hot wire anemometric measurements, which provided a characterization of mean and fluctuating velocity fields in the jet plume. Pressure fluctuations acting on the flat plate were studied by cavity-mounted microphones which provided point-wise measurements in stream-wise and spanwise directions. Statistical description of velocity and wall pressure fields are determined in terms of Fourier-domain quantities. Scaling laws for pressure auto-spectra and coherence functions are also presented.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.4
• /
• pp.422-434
• /
• 2016

This study was conducted to understand roles of $NO_x(=NO+NO_2)$ on high $O_3$ episodes at an urban monitoring station in Seoul. Concentrations of NO, $NO_2$, $NO_y$ and $O_3$ were measured intensively at KIST monitoring station which located at urban center in Seoul metropolitan area during May 18~June 13, 2015. Sampling period was planed because high $O_3$ and PM occurred frequently during from late spring to early summer months in Seoul. The experimental site locates in NW from center of Seoul and is surrounded by residential area. Belt highway of the city runs from north to west side nearby experimental site. Vehicle exhaust emissions due to heavy traffic influenced $NO_x$ concentration at the site during northwesterly wind. Specific $NO_2$ concentration was measured by Blue Light photolytic converter, and it was compared to $NO_2$ concentration measured by molybedenum converter. $[NO_2]_{phtolysis}$ was usually lower than $[NO_2]_{molybedenum}$ during the experiment period; however their diurnal variations were very similar. The linear relationship between these $NO_2$ concentrations was found to be $[NO_2]_{phtolysis}$=0.64 $[NO_2]_{molybedenum}$ - 2.6, $r^2$=0.83 during May 16~8, 2015. The difference between $NO_2$ by molybdenum converter and by photolytic converter (${\Delta}NO_2=[NO_2]_{molybedenum}-[NO_2]_{phtolysis}$) accounted for residual $NO_y$ which can represent $NO_z$ (=$NO_y-NO_x$). $O_3$ concentration showed typical daily trend which has maximum at late afternoon and minimum during the night. $O_3$ increased at a rate of 7 ppb/hr since 8 am. and reached the maximum concentration (~80 ppb) at 3 pm.. The diurnal pattern of $O_3$ was inversely related with that of $NO_2$, suggesting that the formation of $O_3$ was the result of photochemical activity of $NO_2$.

• Economic and Environmental Geology
• /
• v.25 no.3
• /
• pp.317-336
• /
• 1992

The garden soils, main road dusts, residential road dusts, and playground soils/dusts of Seoul, Geumsan, Onsan, and Taebaek areas were analyzed in order to investigate the level of heavy metal pollution by urbanization and industrialization. The soil pH is in the range of 5.48~8.40 and was generally neutral. The color of soils and dusts is mainly Raw Umber to dark greyish Raw Umber. Some samples from Taebaek city, a coal mining area, showed a deep black color due to contamination by coal dusts. Major minerals of the dusts and soils are quartz, feldspars, and micas, reflecting the composition of the parent rocks. However, pyrite was found as a major mineral in the samples of industrial road dusts of Onsan, a smelting area, and resicential road dusts of Taebaek. Thus, the high level of heavy metals in mining and smelting areas can be explained with the sulfide minerals. The mode of occurences of heavy metals in Seoul, a comprehensive urbanized area, were related to the metallic pollutants and organic materials through observation by scanning eletron microscopy. In main road and residential road dusts of Onsan area, Cd, Zn, and Cu were extremely high. Some industrial road and residential road dusts of Seoul area showed high Cu, Zn, and Pb contents, wereas some garden soils and residential road dusts of Taebaek area were high in As content. In general, the heavy metal contents in dust samples were two to three times higher than those in soil samples. Main road dust samples were the most reflective from the discriminant analysis of multi-element data. Cadmium, Sb, and Se in Onsan area, As in Taebaek area, Pb and Te in Seoul area were most characteristic in discriminating the studied areas. Therefore, Cd in smelting areas, As in coal mining areas, and Pb in metropolitan areas can be suggested as the characteristic elements of each pollution pattern. The dispersion of heavy metal elements in urban areas tends to orignate in main roads and deposit in garden soils through the atmosphere and residential roads. The heavy metal contamination in Seoul is characteristic in areas with high population, factory, road, and traffic decsities. Heavy metal contents are high in the vicinity of smelters in Onsan area and are decayed to background levels from one kilometer away from the smelters.

• Journal of Korean Society of Transportation
• /
• v.34 no.5
• /
• pp.377-393
• /
• 2016

Vehicle emissions have been known as a critical factor to give a negative impact on the public health. In particular, particulate matters(PM) and NOx are highly related with respiratory diseases such as asthma. This study aimed at analyzing spatio-temporal patterns of PM and NOx generated from urban freeway traffic. MOVES, which is a well-known emission analysis tool presented by US Environmental Protection Agency(EPA), was applied to estimate PM and NOx based on traffic volume and speed data obtained from Seoul Outer Ring Expressway during January~June, 2012. K-means clustering analysis was used for categorizing the Level of Vehicle Emissions(LOVE) to support more systematical identification of the significance of emissions. Then, spatio-temporal analyses of estimated emissions were conducted by LOVE. Finally, this study proposed a set of strategies to reduce both PM and NOx to enhance public health based on analysis results.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.543-553
• /
• 2010

Almost five million citizens a day are using subways as a means of traffic communication in the Seoul metropolitan. As the subway system is typically a closed environment, indoor air pollution problems frequently occurs and passengers complain of mal-health impact. Especially $PM_{10}$ is well known as one of the major pollutants in subway indoor environments. The purpose of this study was to compare the indoor air quality in terms of $PM_{10}$ and to quantitatively compare its source contributions in a Seoul subway platform before and after installing platform screen doors (PSD). $PM_{10}$ samples were collected on the J station platform of Subway Line 7 in Seoul metropolitan area from Jun. 12, 2008 to Jan. 12, 2009. The samples collected on membrane filters using $PM_{10}$ mini-volume portable samplers were then analyzed for trace metals and soluble ions. A total of 18 chemical species (Ba, Mn, Cr, Cd, Si, Fe, Ni, Al, Cu, Pb, Ti, $Na^+$, $NH_4^+$, $K^+$, $Mg^{2+}$, $Ca^{2+}$, $Cl^-$, and ${SO_4}^{2-}$) were analyzed by using an ICP-AES and an IC after performing proper pre-treatments of each sample filter. Based on the chemical information, positive matrix factorization (PMF) model was applied to identify the source of particulate matters. $PM_{10}$ for the station was characterized by three sources such as ferrous related source, soil and road dust related source, and fine secondary aerosol source. After installing PSD, the average $PM_{10}$ concentration was decreased by 20.5% during the study periods. Especially the contribution of the ferrous related source emitted during train service in a tunnel route was decreased from 59.1% to 43.8% since both platform and tunnel areas were completely blocked by screen doors. However, the contribution of the fine secondary aerosol source emitted from various outside combustion activities was increased from 14.8% to 29.9% presumably due to ill-managed ventilation system and confined platform space.

• Journal of Korean Elementary Science Education
• /
• v.35 no.1
• /
• pp.26-38
• /
• 2016

The purpose of this study was to grasp the characteristics of composition regarding the material-centered integrated unit of environmental and natural studies, a science subject in Finland, to investigate a need for applying the material-centered integrated unit to the science curriculum of Korea. For the purpose, the study made an analysis on contents, inquiry activities, and visual materials (the most important in the elementary science curriculum and textbook composition), and it brought following results: First, as a result of analyzing the area of contents, the bicycle material-centered integrated unit comprised a large proportion of 44 pages (25.3%) of the whole 174 pages from the environmental and natural studies textbook for the third grade. The contents included such various concepts as traffic rules, safety, environmental protection and pollution, recycling and separate collection, tubes and triangular structures, wedges and screws, leverage, wheels, axles, gears, elasticity (spring), friction, and so on. Second, as a result of analyzing contents related to the thinking ability of inquiry activities, "expecting or confirming expectations" and "application" are included in every lesson, and one lesson is composed in such a way that students can study on bicycles as a practical material for their daily life and they can improve various thinking abilities. Third, as a result of analyzing the circumstances of inquiry activities, daily circumstances made up eight lessons (80.0%) and technical and social circumstances made up two lessons (20.0%) by focusing on bicycles, a material related to students' daily life. Fourth, as a result of analyzing visual materials, the percentage of pictures and photos was high at 53.4% and 45.2% respectively. As a result of analyzing the role of visual materials, the percentage of the illustrative role and explanatory-complementary role was high at 52.1% and 47.9% respectively. Lastly, as a result of analyzing from the epistemological view to interpret the relation between visual materials and students and the position of visual materials, the visual textbook materials were provided toward a way that students can decrease their feeling of epistemological separation in the three fields of ideational metafunction, interpersonal metafunction, and textual metafunction.

• Korean Journal of Environmental Agriculture
• /
• v.10 no.1
• /
• pp.1-10
• /
• 1991

The object of this stduy was to investigate the pollution of Pb in paddy field soil with different distance from roadside and to find out the relationship between the ratio of chemical fractions of total Pb and soil characteristics. Lead from automobiles is exhausted as particulates composed primarily of halide compounds (PbBrCl, $PbBr_2$, $PbCl_2$). The samples of soil were collected directly from the paddy fields with different distance from the roadside of highway and expressway which are located in Kyungpook province. A sequential extraction procedure was used to fractionate Pb in paddy field soil into the disignated forms of water soluable, exchangeable, organically bounded, carbonate, sulfide, and residual Pb. Results obtained are summerized as follows. 1. The content of Pb in paddy field soil was the highest in Chungdo, 30.0 ppm, the lowest in Koryung, 14.8 ppm, and the total average content was 21.9 ppm. The effect of traffic volume was not clear, but a slight difference according to the order of opened year of roads was showed. 2. The effect of distance from roadside was not clear. The content of Pb in paddy field soil with different distance from roadside was 22.2 ppm within l0m, 22.1 ppm in 10∼30m, 22.2 ppm in 30∼50m. and 21.3 ppm beyond 50m. 3. The distribution of Pb fractions in soil showed a wide difference depending on soil properties. The average content of exchangeable. organically bounded, carbonate, sulfide, and residual Pb was 8.6%, 33.6%, 29.8%, 21.5%, and 6.7%, of total Pb in the soil, respectively. 4. The content of organically bounded Pb in soil showed highly positive correlation with organic matter and CEC, while the content of exchangeable Pb was highly negative correlation. 5. With higher soil organic matter and CEC, organically bounded Pb fraction tend to be higher but exchangeable Pb fraction tend to be lower. Other forms of Pb showed no difference with soil organic matter contend and CEC. The distribution of Pb fraction related to CEC showed similiar tendency with that of organic matter content.