• Journal of Korean Society of Transportation
• /
• v.33 no.6
• /
• pp.509-519
• /
• 2015

In spite of the efforts to reduce traffic accidents of commercial vehicles, the number of driving under the influence (DUI) of commercial drivers has been increasing. This study examines the effect of stress coping style of commercial drivers on driving behaviors. Specifically, this research aims to find the role of life stress as a mediator in the relationships between the stress coping style and problematic drinking behaviors. 1308 licensed commercial vehicle drivers participated in this research. Results showed that life stress mediated the relationships between problem focused strategies, wishful thinking strategies, passive avoidance strategies and problematic drinking behaviors. These findings indicate that educating drivers to change their stress coping styles would be helpful to inhibit them from being involved in drunken driving.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.113-124
• /
• 2009

This paper suggests a new approach for providing information for driver safety at signalized intersections. Particularly dangerous situations at signalized intersections such as red-light violations, accelerating through yellow intervals, red-light running, and stopping abruptly due to the dilemma zone problem are considered in this study. This paper presents the development of a dangerous vehicle determination algorithm by collecting real-time vehicle speeds and times from multiple point detectors when the vehicles are traveling during phase-change. For an evaluation of this algorithm, VISSIM is used to perform a real-time multiple detection situation by changing the input data such as various inflow-volume, design speed change, driver perception, and response time. As a result the correct-classification rate is approximately 98.5% and the prediction rate of the algorithm is approximately 88.5%. This paper shows the sensitivity results by changing the input data. This result showed that the new approach can be used to improve safety for signalized intersections.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.125-134
• /
• 2009

Recently, as IT technology and the ubiquitous environment have diffused, the application of these techniques are being attempted in the field of traffic operations and management. Therefore, it is necessary to develop data collection systems and signal control strategies that are suitable in the ubiquitous environment and that will improve efficiency and safety of signalized intersections. The authors conducted a study on the Wireless Sensor Network (WSN) signal control strategy using a wireless communication network between individual vehicles and a signal-control system and full actuated signal control technique to propose a new signal control strategy in the ubiquitous environment. The WSN was defined to evaluate the algorithm used with PARAMICS API simulation. The simulation produced results that the WSN signal control is more effective than other signal control methods. The WSN signal control could reduce vehicle delay time to a maximum of 64% in comparison with other signal control methods in low and near saturation flow conditions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.3
• /
• pp.196-200
• /
• 2010

The number of railway tunnels has been increasing rapidly. Although fires in long railway tunnels are rare, the consequences can be devastating. Prior to this study, there were no adequate time-temperature curves for the fire safety assessment of Korean railway tunnels. We studied a standard foreign time-temperature curve for which the heat rate is based on the traffic and the types of vehicles. We then proposed a hydrocarbon curve as a fire design model for railway tunnels in Korea. We examined the implications of this proposed model on railway tunnel structures using numerical analysis.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.2
• /
• pp.74-84
• /
• 2016

After installing roundabouts, changes of travel behaviour in the vicinity of roundabouts can cause increasing traffic volumes and unbalanced flow conditions. In that cases, the efficiency of roundabouts as a whole intersections can drop due to the insufficient gap between vehicles in the circulating lanes. The purpose of this study is developing a dynamic signal metering operation method for roundabouts in which a real time Signal Metering operation algorithm is suggested and its performance is tested by using VISSIM COM Interface(Visual Basic Application). The results of the real time Signal Metering operation show that there is a substantial delay improvements when two adjoined approaches are combined together and the flows of metering approach are less than controlling approach. Especially, the total entering flow is around 1,600 vehicle/h gives the delay reduction per vehicle of 70.9~102.2(73.8~77.8%) seconds for four-lane-approach with one-lane roundabouts.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.57-62
• /
• 2014

Recently, research activities to develop services for providing safety information to the drivers in fast moving vehicles based on various wireless network technologies such as DSRC (Dedicated Short Range Communication), IEEE 802.11p WAVE (Wireless Access for Vehicular Environment) are widely being carried out. This paper presents a proof-of-concept model based on a robot-car for Dilemma Zone Decision Assistant Service using the wireless LAN technology. The proposed model system consists of a robot-car based on an embedded Linux OS equipped with a WiFi interface and an on-board unit emulator, an Android-based remote controller to model a human driver interface, a laptop computer to run a model traffic signal controller and signal lights, and a WiFi access point to model a road-side unit.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.780-783
• /
• 2009

The application of MOST150 technology has been required to satisfy the demand for the automotive infotainment system and the higher bandwidth requirements caused by the increase of the multimedia processing capacity. The Ethernet technology applied gateway was implemented for an efficient transmission of multimedia, a vehicle diagnosis, an external communication, a data processing between the MOST150 and the CAN communication method applied to many existing vehicles. The new algorithm and application were suggested in order to efficiently perform the data processing between other types of communication systems. The existing MOST150 frame is mainly composed of the Control Channel, the Legacy Packet Channel(async) and the Synchronous /Isochronous Channels and performs the data processing through these sequential channels. With the sense of this process, this study suggested the new algorithm that the Mapping method of the IETF's QoS Management was applied to the MOST150 technology for the efficient QoS.

• Structural Monitoring and Maintenance
• /
• v.2 no.3
• /
• pp.283-300
• /
• 2015

Visual condition inspections remain paramount to assessing the current deterioration status of a bridge and assigning remediation or maintenance tasks so as to ensure the ongoing serviceability of the structure. However, in recent years, there has been an increasing backlog of maintenance activities. Existing research reveals that this is attributable to the labour-intensive, subjective and disruptive nature of the current bridge inspection method. Current processes ultimately require lane closures, traffic guidance schemes and inspection equipment. This not only increases the whole-of-life costs of the bridge, but also increases the risk to the travelling public as issues affecting the structural integrity may go unaddressed. As a tool for bridge condition inspections, Unmanned Aerial Vehicles (UAVs) or, drones, offer considerable potential, allowing a bridge to be visually assessed without the need for inspectors to walk across the deck or utilise under-bridge inspection units. With current inspection processes placing additional strain on the existing bridge maintenance resources, the technology has the potential to significantly reduce the overall inspection costs and disruption caused to the travelling public. In addition to this, the use of automated aerial image capture enables engineers to better understand a situation through the 3D spatial context offered by UAV systems. However, the use of UAV for bridge inspection involves a number of critical issues to be resolved, including stability and accuracy of control, and safety to people. SLAM (Simultaneous Localisation and Mapping) is a technique that could be used by a UAV to build a map of the bridge underneath, while simultaneously determining its location on the constructed map. While there are considerable economic and risk-related benefits created through introducing entirely new ways of inspecting bridges and visualising information, there also remain hindrances to the wider deployment of UAVs. This study is to provide a context for use of UAVs for conducting visual bridge inspections, in addition to addressing the obstacles that are required to be overcome in order for the technology to be integrated into current practice.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.314-324
• /
• 2021

Competition between ports around the world is intensifying to attract transshipment cargo. However, recently, there have been concerns about the departure of transshipment cargo volume at Busan Port, such as the lifting of the cabotage policy in China's shipping sector and the implementation of a safe fare system. In terms of operation, terminal congestion and vehicle waiting time are seriously occurring due to imbalance in the transshipment volume of each terminal and vehicles concentrated in a specific time period. In this paper, we propose a method of inter-terminal transportation (ITT) using buffer space to solve the problem caused by inefficient ITT systems and presented a mixed integer programming (MIP) for the problem. The effect of using the buffer space was analyzed for various work volumes and capacity fluctuation ranges by applying the terminal congestion pattern and ITT vehicle in/out pattern based on the Busan New Port data.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.3
• /
• pp.68-83
• /
• 2019

The number of pedestrian traffic accident fatalities is three times the number of car accidents in South Korea. Serious accidents are caused especially at intersections when the vehicle turns to their right. Various pedestrian collision warning services have been developed, but they are insufficient to prevent dangerous pedestrians. In this study, P2CWS is developed to warn approaching vehicles based on the pedestrians' characteristics. In order to evaluate the performance of the service, actual pedestrian data were collected at the intersection of Daejeon, and comparative analysis was carried out according to pedestrian characteristics. As a result, the performance analysis showed a higher accordance when the characteristics of the pedestrian is considered. Accordingly, we can conclude that identifying pedestrian characteristics in predicting the pedestrian crossing is important.