• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.1
• /
• pp.30-38
• /
• 2003

This paper presents an efficient region-based motion segmentation method for segmenting of moving objects in a traffic scene with a focus on a Video Monitoring System (VMS). The presented method consists of two phases: motion detection and motion segmentation. Using the adaptive thresholding technique, the differences between two consecutive frames are analyzed to detect the movements of objects in a scene. To segment the detected regions into meaningful objects which have the similar intensity and motion information, the regions are initially segmented using a k-means clustering algorithm and then, the neighboring regions with the similar motion information are merged. Since we deal with not the whole image, but the detected regions in the segmentation phase, the computational cost is reduced dramatically. Experimental results demonstrate robustness in the occlusions among multiple moving objects and the change in environmental conditions as well.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.825-831
• /
• 2020

In modern society, automobiles have become an essential means of transportation. It is the only consumable that is worn by contacting the ground among automobile parts. If the tyres are severely worn, the tyres may be break, presenting a risk of a serious accident to the driver. To avoid this risk, drivers should check tyre pressure and tread condition before driving a car. Tyre inflation pressure can be easily measured by TPMS, but in the case of tyre tread conditions, it can be cumbersome when the driver measures it directly using a coin or vernier caliper. This hassle can expose the driver to traffic accidents due to tyre breakage by neglecting to measure the condition of the tyre tread. In this paper, we introduce the contents of research to design an IoT service-based system that can automatically measure automobile tyres, and we verified the possibility of realizing the system by actually implementing and testing some components of the system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.1-11
• /
• 2009

TCS Data imply characteristics of traffic conditions. However, there are outliers in TCS data, which can not represent the travel time of the pertinent section, if these outliers are not eliminated, travel time may be distorted owing to these outliers. Various travel time can be distributed under the same section and time because the variation of the travel time is increase as the section distance is increase, which make difficult to calculate the representative of travel time. Accordingly, it is important to grasp travel time characteristics in order to compute the representative of travel time using TCS Data. In this study, after analyzing the variation ratio of the travel time according to the link distance and the level of congestion, the outlier elimination model and the smoothing model for TCS data were proposed. The results show that the proposed model can be utilized for estimating a reliable travel time for a long-distance path in which there are a variation of travel times from the same departure time, the intervals are large and the change in the representative travel time is irregular for a short period.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.2
• /
• pp.503-512
• /
• 2017

Over the past few years, as maritime trade and traffic were highly expanding, problem of invasive species via ballast water have been raised. In 1988, Canada and Australia had firstly experience that unexpected and hazardous species were observed on their own sea, they have issued the problem to MEPC under the IMO. At the end of many years of discussion, on the diplomatic conference in 13 Feb. 2004, "International Convention for the Control and Management of Ballast Water and Sediments of the Ship" was adopted. Requirements for entering into force of this Convention is that 30 countries ratify and world merchant marine fleet is more than 35% and BWM Convention will be effected after 12months from date satisfying conditions. With Finland ratifying the BWM Convention on 8 Sep. 2016, the fleet amounted to 35.1441% and ratification country became 52 countries. Therefore, after 12month, BWM Convention will be formally effected on 8 Sep. 2017. Ballast Water Treatment System is to be fitted in new ships as well as existing ships. Thus, there are concerns of ship owners to be suitably installed a variety typed BWTS in many kinds of vessels. As approaching for resolving these problems, engineering analysis was carried out research studies and detailed design to analyze to optimal installation space for retrofitting a BWTS using 3D Scanning method, targeting representative DWT 180K Bulk carrier of dry cargo vessels charged more 40% on worldwide vessel and mainly two type BWTS as electrolysis treatment type and ultra violet treatment type. Optimal design of 3D Scanning technology was applied to analyze four step process and the overall conclusion was described in this paper.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.79-88
• /
• 2015

This paper introduces surveillance equipment "ADS-B", the core subject of traffic control system and study of ADS-B 1090ES ground receiver. The standard is set not only for functional but also its reliability by analyzing international standard documents and existing products. The Bias circuit is designed for less power consumption, low noise and high gain for RF module. The signal processing is capable of overcoming its bad conditions. MCU part is configured with the latest CPU for high speed communication with external parts and SNMP is selected for remote control communication. The performance of developed receiver satisfies national and international standards and its functions are more advanced compared to foreign receivers.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.9
• /
• pp.55-69
• /
• 2013

An alternative design method of existing methods based on elastic theory the design method of roadbed considering plastic deformation of roadbed and stress-strain at roadbed materials with the cyclic loading of trains passing. The characteristics of the developed design method considering traffic load, number of cyclic loading and resilience modulus of roadbed materials can evaluate elastic strain as well as plastic settlement with allowable design criteria. The proposed design method is applied to standard roadbed section drawing of HONAM high-speed railway considering design conditions such as allowable elastic and plastic settlement, train speed, the tonnage of trains. As a result, required levels of resilience modulus model parameter ($A_E$), unconfined compressive strength, types of soil material were evaluated.

• Convergence Security Journal
• /
• v.11 no.1
• /
• pp.11-18
• /
• 2011

Wireless mesh network technology with transmission speeds similar to wired and wireless technology means to build, compared with wired networks, building a more efficient network to provide convenience and flexibility. The wireless mesh network router nodes in the energy impact of the mobility is less constrained and has fewer features entail. However, the characteristics of various kinds due to network configuration settings and the choice of multiple paths that can occur when the system overhead and there are many details that must be considered. Therefore, according to the characteristics of these network routing technology that is reflected in the design and optimization of the network is worth noting. In this paper, a multi-path setting can be raised in order to respond effectively to the problem of the router node data loss and bandwidth according to traffic conditions and links to elements of the hop count evaluation by using a genetic algorithm as a workaround for dynamic routing the routing metric for wireless mesh network scheme is proposed.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.15 no.2
• /
• pp.23-30
• /
• 2009

The purpose of this study is to suggest planning directions of architectural integrates model by analysing the foreign case of integrated services for the aged and the disabled. For this study, we have researched on three different aspects. Three aspects are the element of barrier-free, architectural planning, information technology and operation. Based on the analysis of overseas examples, the good circumstance for both the disabled and the elder as one of member in the local societies could be defined like the following conditions: that is, (1) IT technology facilitates both barrier-free architecture and life to be easier and safer, and (2) both the disabled and the elder in local societies live together with the non-disabled in the same community. To realize this purpose, for a short-term plan, the system of feedback, examining the results of the research through the examples of housing plan, should be improved. In addition to, the system of public service, such as introducing the institutes for social educations, should be developed to result in the change of social insight. For a long-term plan, the whole society should have the research and plan of the unified model in a dimension of cities, where the network of public welfare is deeply associated with the system of the architecture, traffic, streets, and living-supporting information.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.2
• /
• pp.184-191
• /
• 2017

This paper presents cluster based hybrid spectrum sensing system for M2M services. For each cluster, secondary nodes within the transmission radius of the primary node use hard decision method through local spectrum sensing to determine whether the primary node exists. And the other secondary nodes and the secondary nodes having poor radio channel conditions judge the existence of the primary node through the soft decision method of the values obtained by performing the cooperative spectrum sensing. In the proposed hybrid spectrum sensing system, the performance according to the number of secondary nodes is analyzed with the conventional system over Rayleigh fading channel. As the number of cooperative sensing users increased to 2, 3 and 4, the cluster error probability decreased to 0.5608, 0.5252 and 0.4001 at SNR of -10[dB] respectively. Since the proposed system uses less overhead traffic, it is found that it is more effective in terms of frequency usage than the conventional system using soft decision-soft decision and soft decision-hard decision methods.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.230-239
• /
• 2006

The depth, width and alignment of fairway that are main port water facilities should be designed considering the various elements including particulars of design ships, weather and sea conditions around fairway and method of ship-handling. However not only the existing Japanese design standard for fairway and also those of other countries do not take into consideration of such kind of elements and no design standard is made by quantitative analysis. In this circumstance the new design standard (Approach Channels, A Guide for Design) depending on classified various elements and quantitative analysis was proposed in 1997 by PIANC and IAPH. But it was proved that calculated values according to this standard were unfounded and had some problems to output the discontinuous value by small difference of calculation condition because the each value fur each element was simply added. And also it is hard to apply this standard to the design of port water facilities in Japan because this [A Guide for Design] is the design standard for long channels in European port. The proposal of more reasonable Japanese standard will be expected by applying the study result of naval architecture and navigation and by the cooperation of ship operators to use fairway, naval architects to built ships and civil engineers to dredge fairway. The concept of a fairway in 'Design standard fur fairway in next generation' is defined as passage for approach channel) and traffic lane designated by light buoys as navigable water for safe navigation. In 'Design standard for fairway in next generation' depth, width and alignment are picked up among many design elements of a fairway. Design method for those elements is shown based on design ships and navigational environments. This standard shows the method of design for each dimension depending on characteristic on design ship and weather and sea condition. On the other hand, in case of existing fairway, it is possible to decide the size of ship and navigation criteria by opposite analysis.