• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.3B
• /
• pp.165-173
• /
• 2012

In this paper, we propose a random backoff scheme for Emergency Warning Messages (EWMs) in the vehicle-to-vehicle environment. The EWMs are disseminated from a vehicle that detects an emergency situation to other vehicles in a multi-hop fashion. Since the vehicle-to-vehicle communication based on IEEE 802.11 adapts CSMA/CA, the density of vehicles increase the probability of collisions between transmissions. Moreover, in the presence of background traffic, the EWM should have a higher priority than that of other messages in neighboring vehicles. To that end, we propose the Distant-Dependent Adaptive Backoff (DDAB) scheme, which set a different contention window for random backoff depending on the distance from the sender to the receiver. In the case when a vehicle is expected to located in the outskirts of the communication boundary, the proposed scheme makes the contention window size small in order to compete the background traffic transmission. Otherwise the contention window is set to a large number to reduce the collision possibility among the EWM transmissions. Via simulations, we show that the proposed scheme performs better than the previous schemes for EWM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.2
• /
• pp.99-113
• /
• 1992

In general, TDMA and FDMA have been used for multiple access communication methods. Recently. However, ALOHA and CSMA protocols came to exist as new schemes for VSAT data networks and LANs, respectively. These schemes are proven to be effective for packet switched communication systems that has bursty traffic but packet collisions. In this paper we analyze capture statistics arising from fading channels in packet radio communication systems in the context of ALOHA protocol. We derive general results of the exact form of capture probabilities and present numerical data for wide range of fading parameters. Since the capture probabilities are found to approach zero when the number of transmitted signals become larger, we are able to determine the achievable channel throughput by a least squares fitting of an exponential-type function to the probabilities.

• Journal of Communications and Networks
• /
• v.14 no.5
• /
• pp.524-532
• /
• 2012

In this paper, we present the performance evaluation of the reliable cooperative media access control (RCO-MAC) protocol, which has been proposed in [1] by us in order to enhance system throughput in bad wireless channel environments. The performance of this protocol is evaluated with computer simulation as well as mathematical analysis in this paper. The system throughput, two types of average delays, average channel access delay, and average system delay, which includes the queuing delay in the buffer, are used as performance metrics. In addition, two different traffic models are used for performance evaluation: The saturated traffic model for computing system throughput and average channel access delay, and the exponential data generation model for calculating average system delay. The numerical results show that the RCO-MAC protocol proposed by us provides over 20% more system throughput than the relay distributed coordination function (rDCF) scheme. The numerical results show that the RCO-MAC protocol provides a slightly higher average channel access delay over a greater number of source nodes than the rDCF. This is because a greater number of source nodes provide more opportunities for cooperative request to send (CRTS) frame collisions and because the value of the related retransmission timer is greater in the RCO-MAC protocol than in the rDCF protocol. The numerical results also confirm that the RCO-MAC protocol provides better average system delay over the whole gamut of the number of source nodes than the rDCF protocol.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.338-347
• /
• 2024

This paper deals with the study of bird collision avoidance measures in UAM operations from an operator's perspective. Urban air traffic is defined as a next-generation transportation system that uses environmentally friendly electric vertical take-off and landing (eVTOL) aircraft to provide transportation services between key points within and around urban centers. For the successful establishment of the UAM industry, it is necessary to ensure safety issues that determine public acceptance. Among the hazards that can occur in aviation operations, preventing bird collisions in urban environments is a measure that can greatly secure operational safety and public acceptance. In addition to physical measures, procedural control measures are required to prevent bird strikes. In order to ensure the safety of UAM operations, this study aims to provide a direction for the establishment of UAM bird collision prevention measures by categorizing bird collision prevention measures into physical and procedural methods and flight sections such as takeoff, landing, and corridor sections. Through this, we hope to contribute to the improvement of the safety of the urban air traffic operation system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.539-546
• /
• 2011

Traffic accident collision interpretation is composed of various shapes, and speed variations working to the vehicle during collision are utilized as a very important factor in evaluating collision degrees between vehicles and safety of passengers who got in the vehicle. So, methods of interpreting results on speed variations utilizing simulation programs on the collision interpretation become necessary. By the way, reliability evaluation on each program is being required because various collision interpretations simulations are spread widely. This study utilized collision interpretation programs such as EDSMAC and PC-CRASH adopting completely different physical approaches, and then carried out collision experiments of one-dimensional front and two-dimensional right angle while changing values of a lot of collision factors such as vehicle's weight, center of gravity, rolling resistance, stiffness coefficient, and braking forces among early input conditions. Also, the study recognized effects of collision factors to speed variations as output results during crashing. As a result of this research, two simulation programs showed same speed variations together on the vehicle's weight, center of gravity, and braking forces. Stiffness coefficient of the vehicle reacted to EDSMAC only, and rolling resistance coefficient did not affect any particular influences on speed variations. However, there appeared a bit comparative differences from the speed variation's values, and this is interpreted as responding outcomes by applying fixed properties values to each simulation program plainly. Therefore, reliability on analysis of traffic accident collisions shall be improved by doing speed analysis after taking the fixed value of simulation programs into consideration.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.2
• /
• pp.191-195
• /
• 2008

This paper proposes a technique for improving IEEE 802.11e EDCA's performance by dynamically adjusting each class's contention window size based on each class's traffic amount. For providing differentiated service differently from 802.11, 802.11e EDCA maintains four classes each of which specifies different static minimum and maximum contention window sizes. Since the initial window sites significantly affect the 802.11e performance, several window adjustment schemes have been proposed. One of the schemes known as CWminAS (CWmin Adaptation Scheme) dynamically and synchronously determines the four windows' site based on the periodically measured collision rate. This method, however, can lower the send probability of high priority classes since it can't differentiate their collisions from those of low priority classes, leading to the channel underutilization. For solving this problem, we propose ACATICT(Adaptive Contention-window Adjustment Technique based on Individual Class Traffic) algorithm which adapts each class window size based on each individual collision rate rather than one average collision rate. Our simulation experiments show that ACATICT achieves better utilization by around 10% at maximum.

• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.478-487
• /
• 2015

This study proposed a Variable Speed Limits(VSL) algorithm to use traffic information based on Cumulative Demand-Capacity Analysis and evaluated its performance. According to the analysis result, the total of delay consisted of 3 separate parts. There was no change in total travel time although the total of delay decreased. These effects was analysed theoretically and then, evaluated through VISSIM, a microscopic simulator. VISSIM simulation results show almost same as those of theoretical analysis. Furthermore in SSAM analysis with VISSIM simulation log, the number of high risk collisions decreased 36.0 %. However, the total delay decrease effect is not real meaning of decrease effect because the drivers' desired speed is same whether the VSL model is operated or not. Nevertheless this VSL model maintains free flow speed for longer and increases the cycle of traffic speed fluctuation. In other words, this is decrease of delay occurrence and scale. The decrease of speed gap between upstream and downstream stabilizes the traffic flow and leads decrease number of high risk collision. In conclusion, we can expect increase of safety through total delay minimization according to this VSL model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.555-564
• /
• 2016

This paper proposes a time slot allocation scheme for military patrol environments. This proposal comes from analysis of traffic properties in a military patrol environment. In the near future, robots are expected to explore enemy grounds and measure threat, taking the place of human patrol. In order to control such robots, control messages must be extremely accurate. One mistake from the control center could cause a tragedy. Thus, high reliability must be guaranteed. Another goal is to maintain a continual flow of multimedia data sent from patrol robots. That is, QoS (Quality of Service) must be guaranteed. In order to transmit data while fulfilling both attributes, the per-path based centralized TDMA slot allocation scheme is recommended. The control center allocates slots to robots allowing synchronization among robots. Slot allocation collisions can also be avoided. The proposed scheme was verified through the ns-3 simulator. The scheme showed a higher packet delivery ratio than the algorithm in comparison. It also performed with shorter delay time in the downlink traffic transmission scenario than the algorithm in comparison.

• Journal of the Korea Computer Graphics Society
• /
• v.17 no.4
• /
• pp.23-30
• /
• 2011

We propose an intelligent ribbon road network for automatic vehicle simulation, and a real-time algorithm for large-scale, realistic traffic simulation based on artificial energy functions. Our method reconstructs a road network automatically from both GIS (Geographic Information System) real-world data and synthetic models. Such automatic road network helps us to easily simulate almost every possible scenario such as intersections, ramps, etc. In order to simulate agents' movement, we design car-environment interaction energy and car-car interaction energy functions. Car agents move along the road network according to the proposed energy functions while avoiding collisions with other car agents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.8
• /
• pp.3654-3659
• /
• 2011

The MAC protocol of HiperLAN/2 is based on TDMA/TDD. The radio channels are assigned by AP(Access Point) that is centrally operated. Mobile terminal that data transmission is necessary to uplink requests radio resource to AP through RCH channels. The changing number of RCHs in each MAC frame is important because too many RCHs may result in a waste of radio resources and too few RCHs may result in many access collisions and prolong time that connect to AP. Therefore, number of RCH should be allocated properly according to traffic. From these viewpoints, this paper proposes an advanced scheme that dynamically changed the number of RCH which is based on the number of success and collision of RR message in previous MAC frame. To prove efficiency of proposed scheme, lots of simulations are conducted and analyzed.