• International Journal of Automotive Technology
• /
• 제8권4호
• /
• pp.521-531
• /
• 2007

Measurement of the vibration transmitted through rotating shafts such as half shafts in vehicles is of interest in applications such as noise transfer analysis and the study of operating deflections. Vibration signals transmitted through a rotating shaft usually include six degree-of-freedom components, thus making the measurement of vibration a challenging task. In the present work, a new measurement method is presented, one that resolves the minimum of only two one-axis accelerometer signals into all components of vibration with reasonable accuracy. The method utilizes the Dopplerized signals obtained from accelerometers attached to a rotating shaft and a Void-Kalman order tracking filter to decompose signals into orders of different vibration components. The new method proposed in the present work is verified by simulated run-up test data and applied to an experimentally obtained data set.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.73-77
• /
• 2002

The requirements for higher productivity call for high speed of the machine tool axes. Iron core type linear DC motor is growly accepted far a viable candidate of the high speed machine tool feed unit. LDM, however, has inherent disturbance force components: cogging and force ripple. These disturbance force directly affects tracking accuracy of the carrage and must be eliminated or reduced. Reducing motor ripple, this paper adapted the feed forward compensation method and neural network control. Experiments carried 7ut on the linear motor test setup show that this control methods is usable in order to reduce the motor ripple.

• 한국항공우주학회지
• /
• 제35권2호
• /
• pp.171-176
• /
• 2007

이동체와의 통신은 항상 안테나가 이동체의 방향을 지향하고 있어야 한다. 본 연구에서는 안테나가 이동체를 지향하기 위해서 사용되는 방식중 이동체의 위치를 측정하여 이동체와 안테나 사이의 기하학적 위치관계로부터 안테나의 지향각을 결정하는 방법을 사용하였다. 안테나와 무인항공기에 각각 GPS를 설치하여 각각의 위치를 측정하고 계산된 지향각을 향하도록 안테나를 구동하였다. 안테나의 지향각과 일치시켜 설치한 카메라를 사용하여 무인항공기를 촬영하여 추적 안테나 시스템의 성능을 검증하였다

• 한국산학기술학회논문지
• /
• 제11권2호
• /
• pp.644-650
• /
• 2010

본 본 연구에서는 교량의 동적거동에 미치는 영향을 분석하기 위한 교량-차량거동을 파악 하고자 실험적 연구를 수행하였다. 이를 위하여 차량 교량 간 상호작용이 포함된 이동질량 형 윤하중 시험기를 조립식 프리캐스트 패널형식의 단순교량에 적용하여 이동질량 반복주행실험을 수행하였다. 실험분석 결과 차량-교량간 상호작용은 교량의 동적거동에 예측 가능한 거동뿐 아니라 상반거동 및 반전현상등의 추가적인 다양한 거동을 발생시킴을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.540-542
• /
• 1999

We propose the digital range tracking algorithm for a tracking radar. The proposed digital range tracker are designed and implemented. Simulation results are presented for demonstrating the performance of the proposed range tracker. According to our field test results, the implemented digital range tracker performs well even in the real environments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.525-528
• /
• 2005

The tracking antenna system must be always pointed to target moving vehicle. Especially, for an antenna mounted on a movable vehicle, it needs the stabilized antenna system. In this paper, two types of fuzzy controller were derived and applied to a data link antenna system and the altitude control of unmanned helicopter, respectively. A simplified Fuzzy-PID controller was designed for 2-axes antenna stabilization and tracking system and the performance was verified by simulations and experiments. Computer simulations were performed by Matlab and SIMULINK. A 2-Axes antenna (SeaTel 1898 model) was selected as test platform of this research. The antenna was modified by using two Blushless Direct Current motors and an embedded DSP controller. To verify the performance of designed antenna servo control system, the performance of the conventional PID controller and that of the Fuzzy-PID controller, designed by the same PID control gains, were compared.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1404-1406
• /
• 1998

The outdoor polymeric insulating materials such as silicone rubber, ethylene propylene diene monomer(EPDM), ethylene vinyl acetate(EVA) and epoxy are aged by various natural environment with the long-term performance in outdoor. In this paper, the effects of UV-ray on surface of silicone rubber were investigated by using the weather-Ometer. The accelerated aging stresses were simulated by UV radiation. high temperature and humidity as well as water spray. These the aging characteristics were examined through contact angle measurements, tracking resistance test, FT-IR and SEM/EDS analysis. the experimental results showed that tracking resistance decreases with increase in the UV-ray irradiation period. But the surface of silicone rubber kept hydrophobicity. It is found that the inorganic filler such as $Al(OH)_3$ improves tracking resistance and the $TiO_2$ is very effective in preventing degradation of silicone rubber surface from UV-ray.

• 대한전자공학회논문지SP
• /
• 제41권5호
• /
• pp.193-202
• /
• 2004

본 논문에서는 이동 카메라로부터 획득한 컬러 영상에서 다수의 보행자를 검출하고 추적하기 위한 히스토그램과 컬러 정보기반 알고리즘을 제안하였다. 제안한 알고리즘은 RGB 컬러 히스토그램 기법을 이용하여 인접한 보행자를 검출하고 검출된 보행자는 RGB 평균값을 이용하여 추적하였다. 따라서 보행자가 서로 인접해 있거나 약간 겹쳐진 경우에도 검출할 수 있고 보행자의 형태가 변하는 경우에도 효율적으로 추적하였다. 제안된 알고리즘에 대하여 비디오 카메라로 녹화한 영상을 컴퓨터에서 입력받아 보행자 검출과 추적 실험을 수행하여 제안한 알고리즘의 우수성을 입증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.71-73
• /
• 2001

The requirements for higher productivity call for high speed of the machine tool axes. Iron core type linear DC motor is growly accepted for a viable candidate of the high speed machine tool feed unit. LDM, however, has inherent disturbance force components: cogging and force ripple. These disturbance force directly affects the carrage tracking accuracy and must be eliminated or reduced. Reducing motor ripple, this paper adapted the feed forward compensation method. Experiments carried out on the linear motor test setup show that this compensation method is usable in order to reduce the motor ripple.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권1호
• /
• pp.31-35
• /
• 2005

Higher productivity requires high-speed motion of machine tool axes. The iron core linear DC motor (LDM) is widely accepted as a viable candidate for high-speed machine tool feed unit. LDM, however, has two inherent disturbance force components, namely cogging and thrust force ripple. These disturbance forces directly affect the tracking accuracy of the feeding system and must be eliminated or reduced. In order to reduce motor ripple, this research adapted the feedforward compensation method and neural network control. Experiments carried out with the linear motor test setup show that these control methods are effective in reducing motor ripple.