• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.5
• /
• pp.67-73
• /
• 2013

The conversion of solar radiation into electrical energy by Photo-Voltaic (PV) effect is a very promising technology, being clean, silent and reliable, with very small maintenance costs and small ecological impact. The output power produced by the PV panels depends strongly on the incident light radiation. The continuous modification of the sun-earth relative position determines a continuously changing of incident radiation on a fixed PV panel. The point of maximum received energy is reached when the direction of solar radiation is perpendicular on the panel surface. Thus an increase of the output energy of a given PV panel can be obtained by mounting the panel on a solar tracking device that follows the sun trajectory. Tracking systems that have two axes and follow the sun closely at all times during the day are currently the most popular. This paper presents research conducted into the performance of Solar tracking system with photosensors. The results show that an optimized dual-axis tracking system with photosensor performance and analysis. From the obtained results, it is seen that the sun tracking system improves the energy and energy efficiency of the PV panel.ti-junction CPV module promises to accelerate growth in photovoltaic power generation.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.2
• /
• pp.17-22
• /
• 2019

This paper describes the tracking algorithm performance evaluation for autonomous vehicle using a safety envelope based path. As the level of autonomous vehicle technologies evolves along with the development of relevant supporting modules including sensors, more advanced methodologies for path generation and tracking are needed. A safety envelope zone, designated as the obstacle free regions between the roadway edges, would be introduced and refined for further application with more detailed specifications. In this paper, the performance of the path tracking algorithm based on the generated path would be evaluated under safety envelop environment. In this process, static obstacle map for safety envelope was created using Lidar based vehicle information such as current vehicle location, speed and yaw rate that were collected under various driving setups at Seoul National University roadways. A level of safety was evaluated through CarSim simulation based on paths generated with two different references: a safety envelope based path and a GPS data based one. A better performance was observed for tracking with the safety envelop based path than that with the GPS based one.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.10
• /
• pp.982-990
• /
• 2010

In a target tracking system using image information from a CCD (Charged Couple Device) or an IIR (Imaging Infra-red) sensor, occluded targets can result in track losses. If the target is occlued by background objects such as buildings or trees, probability of track existence will be reduced sharply and track will be terminated due to track maintenance algorithms. This paper proposes data association algorithm based on target existence for the robust tracking performance. we suggest the HPDA (Highest Probability Data Association) algorithm based on target existence and the tracking performance is compared with the established method based on target perceivability. Image tracking simulation that utilizes virtual 3D images and real IR images is employed to evaluate the robustness of the proposed tracking algorithm.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.1
• /
• pp.102-109
• /
• 2015

In Korea, Lunar exploration program has been prepared with the aim of launching in the 2020's. As a part of it, a lunar lander demonstrator was developed, which was the model for verifying the system such as structure, propulsion, and control system, before launching into the deep space. This paper deals with the path tracking performance of the lunar lander demonstrator with respect to the thruster controller based on Pulse Width Pulse Frequency Modulator (PWPFM) and Pulse Width Modulator (PWM). First, we derived equations of motion, considering the allocation of the thrusters, and designed the path tracking controller based on Euler angle. The signal generated from the path tracking controller is continuous, so PWPFM and PWM modulator are adopted for generating ON/OFF signal. Finally, MATLAB simulation is performed for evaluating the path tracking ability. We compared the path tracking performances of PWPFM and PWM based thrust controller, using performance measures such as the total impulse and the position error with respect to the desired path.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.11
• /
• pp.591-598
• /
• 2000

In this thesis, a digital tracking controller is proposed for multi-axis position control system. Tracking and contouring error exist when the machine tool moves along a trajectory in multi-axis system. The proposed scheme enhances the tracking and contouring performance by reducing the errors. Also, an optimal tracking controller reduces the tracking error by the state feedback and the feedforward compensator reduces the effects of a nonlinear disturbance such as friction or dead zone. The proposed control scheme reduces the contour error which occurred when the tool tracks the reference trajectory. Finally, the performance of the proposed controller is exemplified by some simulations and by applying the real XY servo system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.8
• /
• pp.739-745
• /
• 2006

This paper presents performance improvement of the INS velocity-adided GPS carier tracking loop. To this end, INS velocity-aided GPS carrier tracking loop was modeled as a feedfoward and a feedback loop system. In the phase tracking loop, it was shown that the tracking error caused by the dynamic motion of the vehicle can be compensated with the aiding of the INS information irrespective of the loop order and bandwidth. However, the signal trcking error increases as the INS error increases. It was also shown that in order to remove the tracking error caused by INS bias error, more than or equal to 2nd order PLL should be used. Experiments were carried out and the experimental results were compared with the analysis results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.3
• /
• pp.349-359
• /
• 1998

A robot control scheme for specific application a line-tracking system is newly presented. To improve the performance of line-tracking, robot arm dynamics and torque constraints are incorporated into the control scheme. The tracking problem for the workpiece on a variable-speed conveyor is formulated as an optimal tracking problem with specific criteria. Dividing the conveyor speed into the nominal term and the perturbed term, a two-stage control strategy is employed to cope with the nonlinearity and uncertainty of the robot-conveyor system. Simulation results are given to verify good tracking performance with fast cycle time and high accuracy in a robotic workcell.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.12
• /
• pp.1256-1260
• /
• 2006

This paper presents an enhanced ${\alpha}-{\beta}$ tracking filter whose ${\alpha}-{\beta}$ gains are updated by an approximation method at every scan to account for the transition of measurement dependent observation error variance in two-dimensional Cartesian coordinates. The approximate ${\alpha}-{\beta}$ gains are calculated from the amount of the change in the tracking index and the partial derivatives of the ${\alpha}-{\beta}$ gains with respect to a nominal tracking index. It is shown via simulation that the proposed tracker provides improved performance compared to the conventional ${\alpha}-{\beta}$ tracking filter.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.3 s.22
• /
• pp.24-32
• /
• 2005

This paper describes the tracking filter performance for Naval Gun Ballistic Computation Unit(BCU). BCU needs tracing filter for gun firing. Using data of tracking sensor, BCU calculates the future position of Target and Gun order in the time of flight. In this paper, tracing filter is designed with interacting multiple model(IMM). The tracking algorithm based on the IMM requirers a considerable number of sub-model for the various maneuvering target in order to have a good performance. But, in the case of ship target, the maneuvering is restricted compared with the air target. Considering the maneuvering properties and adjusting the mode transition probabilities and the process noise of sub-model, We designed the IMM3 algorithm for Naval tracking filter with three sub-model.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.3
• /
• pp.107-110
• /
• 2009

In this paper, a PN code tracking loop with extended Kalman filter (EKF) is proposed for a direct-sequence spread-spectrum. EKF is used to estimate amplitude and delay in a multipath. fading channel. It is shown that tracking error performance is significantly improved by EKF compared with a conventional tracking loop.