• 한국항공운항학회지
• /
• 제14권1호
• /
• pp.70-74
• /
• 2006

Cospas-Sarsat, an international satellite system for search and rescue, started operating in early 1980's and has been credited with saving thousands of lives since then. Hundreds of thousands of aviators, mariners and land users worldwide are equipped with Cospas-Sarsat distress beacons, which could help save their lives in emergency situations anywhere in the world. This paper outlines the evolution of the system and describes how satellites are constantly circling the globe monitoring for rescue signals, while tracking stations on six continents receive the satellite signals, compute the locations of the distress events and forward the calls for help to the appropriate rescue authorities. Therefore, this paper points out the importance of developing of technologies of Hybrid Aviation Wireless SAR Equipment and also proposes to make it localized.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권5호
• /
• pp.3323-3329
• /
• 2013

Background: The Global Adult Tobacco Survey (GATS) was carried out for systematically monitoring tobacco use and for tracking key tobacco control indicators. Materials and Methods: A total of 70,802 households, including 42,647 in rural areas and 28,155 in urban areas, were covered with a three stage sampling design. Data were collected on sociodemographic characteristics, knowledge, attitude and practices of tobacco consumption.Results: GATS-India highlighted that total tobacco use among its residents is overall 34.6%, varying for males (47.9%) and females (20.7%). The rural areas of the country exhibit comparatively higher prevalence rates (38.4%) in comparison to urban areas (25.3%). Overall, Khaini, a smokeless tobacco product (12.0%), is the most popular form of tobacco use among males and females, followed by bidi smoking (9.0%). Conclusion: Results of GATS data can be used as baseline for evaluation of new tobacco control approaches in India integrating culturally acceptable and cost effective measures.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1438-1440
• /
• 2005

A power control and distribution unit(PCDU) plays roles of protection of battery against overcharge by active control of solar array generated power, distribution of unregulated electrical power via controlled outlets to bus and instrument units, distribution of regulated electrical power to selected bus and instrument units, and provision of status monitoring and telecommand interface allowing the system and ground operate the power system, evaluate its performance and initiate appropriate countermeasures in case of abnormal conditions. In this work, we perform the preliminary design of a PCDU scheme for the small LEO Satellite applications. The main constitutes of the PCDU are the battery interface module, the auxiliary supply modules, solar array regulators with maximum power point tracking(MPPT) technology, heater power distribution modules, internal converter modules for regulated bus voltage generation. and instrument power distribution modules.

• 반도체디스플레이기술학회지
• /
• 제18권2호
• /
• pp.32-37
• /
• 2019

In this paper, we have designed a solar photovoltaic system to attach solar photovoltaic modules to each module and develop the best efficiency in each module. The efficiency of the designed solar panel optimizer was more than 99.27% and MPPT efficiency of 99.66%. In addition, the monitoring of power generation and abnormal operation phenomenon in each optimum period and tracking for failure location of specific photovoltaic module have improved the utilization rate of photovoltaic power generation. Wired and wireless communication methods has been proposed to monitor the power generation and operation status of the solar panel optimizer. For this purpose, the RS485 communication was used for wire communication and Zigbee communication was used for wireless communication to monitor the status of each module in real time. It is shown that communication redundancy can be achieved through the proposed method, and the possibility of commercialization is suggested.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.90-94
• /
• 2007

건설 현장의 자재 위치 추적 기술은 건설 프로젝트의 생산성을 극대화시킬 수 있는 중요한 기술로서 현재 국내외적으로 많은 연구가 수행 중에 있다. 최근 들어 RFID(Radio Frequency Identification) 시스템을 이용하여 공급 사슬망 전반에 걸친 건설 자재에 대한 실시간 위치 추적에 대한 연구가 각광을 받고 있다. 그러나 짧은 인식거리, 저조한 인식율등의 문제로 바코드 대체 수준으로 그 활용이 미비한 상황이다. 본 논문에서는 인식거리르 보다 길게 하는 900MHz 대역의 RFID 시스템과 인식된 데이터를 무선 통신(Zigbee)을 사용하여 전달하는 RFID/USN 연동시스템 개발과 그 활용 방안을 제안한다. RFID/USN 연동 시스템을 건설현장의 자재관리에 시험적으로 적용, 실중 테스트를 수행함으로써 첨단 센싱 기술 및 전파식별 기술에 대한 현장 활용 가능 여부, 실증 테스트 시 발생하는 기술적 애로 사항 및 다양한 활용 방안을 도출하는 것을 목적으로 한다. 또한 원격지에 있는 현장 관리자를 위하여 기존 인프라네트워크를 이용하여 실시간 자재 및 장비의 위치 데이터를 관리자가 원할 경우 언제 어디서든 실시간으로 전달 가능하도록 이동통신망(CDMA: Code Division Multiple Access)과의 연동 시스템을 현장에서 적용 및 점검한다.

• Journal of Positioning, Navigation, and Timing
• /
• 제6권1호
• /
• pp.9-15
• /
• 2017

In this paper, results of a jammer detection and localization system operation are given. The system consists of receiver stations, a central tracking station, and a monitoring station and it was developed by our institute in 2014. Through real-time tests, it is confirmed that the developed system has an ability to estimate the location of interference sources with an accuracy of 50 m (CEP) even they was 10 km away. After verification, this system was installed in Incheon International Airport and operating results are being monitored by the airport and our institute continuously. In this year, there were some events that jamming signals were received from North Korea, so the data were analyzed and given here.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.974-977
• /
• 2003

본 연구는 무선 영상 송수신기와 제어용 데이터 송수신기를 이용하여 특정 지역에 대해 인터넷 망과 연동하여 무인 원격 감시 및 제어 망을 구축한다. 시스템의 구성은 CCTV카메라에 의한 영상 정보 수집과 목표물 자동추적장치, 무선 영상 송신기, 제어용 데이터 송수신기, 원격 제어 및 모니터부 그리고 인터넷 망으로 구성된다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.161-164
• /
• 2007

The paper studies in the wide-angle lens and distortion tendency and employs the correction techniques suitable to the fish-eye lens using the existing photographic survey methods. After carrying out the calibration of the the fish-eye lens, we calculated the correction parameters, and then developed the method that convert the original image-point to new image-point correcting distortion. The objectives of suggested calibration method in this paper are to calibrate the image of the the fish-eye lens used in the computer-vision and the control-instrumentation field widely. The proposed technique expects to improve the accuracy of the image of the fish-eye lens in the indoor tracking and monitoring field. Also the referenced cross point auto-extraction program is embodied for improving efficiency of the lens correction techniques. Consequently, this calibration method would be applied to the automated distorting correction method on not only the fish-eye lens also general lens.

• International journal of advanced smart convergence
• /
• 제6권2호
• /
• pp.72-81
• /
• 2017

The developments in mobile technology and the increase in the production of smartphones have led to the growth of the mobile healthcare market. Moreover, the number of mobile healthcare apps is on the rise, and users are benefiting from using healthcare, exercise tracking, and body monitoring apps, as well as they have been searching for health information through mobile health apps. This paper evaluated the usability of a symptom checker application that provides information on diseases, treatment methods, and related hospitals through self-diagnosis of symptoms. Symptom checkers are currently being developed, and are widely used overseas. This paper sought to evaluate the usability of a symptom checker app, and suggested ways to introduce enhancements.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2008년도 한국컴퓨터종합학술대회논문집 Vol.35 No.1 (A)
• /
• pp.261-262
• /
• 2008

Due to technological advances, the manufacturing of small and low cost of sensors becomes technically and economically feasible. In recent years, an increasing interest in using Wireless Sensor Network (WSN) in various applications, including large scale environment monitoring, battle field surveillance, security management and location tracking. In these applications, hundreds of sensor nodes are left to be unattended to report monitored data to users. Since sensor nodes are placed randomly and sometimes are deployed in underwater. It is impossible to replace batteries often when batteries run out. Therefore, reducing energy consumption is the most important design consideration for sensor networks.