• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.1
• /
• pp.43-50
• /
• 2014

This paper introduces a robot platform which can do weeding while traveling between rice seedlings stably against irregular land surface of a paddy field. Also, an autonomous navigation technique that can track on stable state without any damage of the seedlings in the working area is proposed. Detection of the rice seedlings and avoidance knocking down by the robot platform is achieved by the sensor fusion of a laser range finder (LRF) and an inertial measurement unit (IMU). These sensors are also used to control navigating direction of the robot to keep going along the column of rice seedling consistently. Deviation of the robot direction from the rice column that is sensed by the LRF is fed back to a proportional and derivative controller to obtain stable adjustment of navigating direction and get proper returning speed of the robot to the rice column.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.1
• /
• pp.7-13
• /
• 2015

Unmanned air vehicles (UAVs) are getting popular not only as a private usage for the aerial photograph but military usage for the surveillance, reconnaissance and supply missions. For an UAV to successfully achieve these kind of missions, geolocation (localization) must be implied to track an interested target or fly by reference. In this research, we adopted multi-sensor fusion (MSF) algorithm to increase the accuracy of the geolocation and verified the algorithm using two multicopter UAVs. One UAV is equipped with an optical camera, and another UAV is equipped with an optical camera and a laser range finder. Throughout the experiment, we have obtained measurements about a fixed ground target and estimated the target position by a series of coordinate transformations and sequential Kalman filter. The result showed that the MSF has better performance in estimating target location than the case of using single sensor. Moreover, the experimental result implied that multi-sensor geolocation algorithm is able to have further improvements in localization accuracy and feasibility of other complicated applications such as moving target tracking and multiple target tracking.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2357-2360
• /
• 2002

For the satisfying performance of a oil lubricator, design of a oil controller for the system which meets the required specifications and its supporting hardware that keep their functioning is important. Among the hardware of a control system, oil system are most vulnerable to malfunction. Thus it is necessary to keep track of accurate and reliable oil readings for good fusion oil lubricator performance. In case of oil lubricator, data loss, ssr trigger error faults, they are detected by examining the data system output values and the major values of the system, and then the faults are recognized by the analysis of symptoms of faults. If necessary electronic-sensor values are synthesized according to the types of faults, and then they are used for the controller instead of the raw data. In this paper, a fast-32bit cpu microprocessor applied to the control of flexible link system with the sensor fault problems in the error modulo for exact positioning to show the applicability. It is shown that the fusion oil lubricator can provide a satisfactory loop performance even when the sensor faults occure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.137-140
• /
• 2002

For the satisfying performance of a oil lubricator, design of a oil controller for the system which meets the required specifications and its supporting hardware that keep their functioning is important. Among the hardware of a control system, oil system are most vulnerable to malfunction. Thus it is necessary to keep track of accurate and reliable oil readings for good fusion oil lubricator performance. In case of oil lubricator, data loss, ssr trigger error faults, they are detected by examining the data system output values and the major values of the system, and then the faults are recognized by the analysis of symptoms of faults. If necessary electronic-sensor values are synthesized according to the types of faults, and then they are used for the controller instead of the raw data. In this paper, a fast-32bit cpu micorprocessor applied to the control of flexible link system with the sensor fault problems in the error module for exact positioning to show the applicability. It is shown that the fusion oil lubricator can provide a satisfactory loop performance even when the sensor faults occure

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.98-103
• /
• 2010

In this paper, imaging processing study obtained from CCD image and thermography image was performed in order to treat easily thermographic data without any risks of personnels who conduct the condition monitoring for the abnormal or failure status occurrable in industrial power plants. This imaging processing is also applicable to the predictive maintenance. For confirming the broad monitoring, a methodology producting single image from the panorama technique was developed no matter how many cameras are employed, including fusion method for discrete configuration for the target. As results, image fusion from quick realtime processing was obtained and it was possible to save time to track the location monitoring in matching the images between CCTV and thermography.

• Tribology and Lubricants
• /
• v.36 no.1
• /
• pp.47-54
• /
• 2020

In this study, the effects of ultrasonic nanocrystal surface modification (UNSM) treatment at room and high temperatures (RT and HT of 400℃) on friction and wear behavior of Ti-6Al-4V alloy prepared by selective laser melting (SLM) were investigated. The objective of this study is to improve the mechanical properties and frictional behavior of Ti-6Al-4V alloy by UNSM treatment. Dry friction and wear tests were conducted using a ball-on-disk method at RT with a bearing steel as the counter ball. Due to the high HT and UNSM treatment, the surface hardness tended to increase and surface roughness tended to reduce. X-ray diffraction (XRD) analysis showed that nanocrystallization structure and compressive residual stress were formed at the surface layer after UNSM treatment at both RT and HT. After UNSM treatment, it was observed that the wear rate was reduced by about 6% for the specimen treated at RT and a 28% reduction for the specimen treated at HT in comparison with the untreated one. Based on scanning electron microscope (SEM) images showed that the damage caused by fatigue wear occurred in the wear track of the heat-treated specimen, and it is believed to be the cause of the highest wear rate. Mechanical properties and wear resistance of Ti-6Al-4V alloy were improved and prospect of industrial application was confirmed. Further research is still required to improve the characteristics of SLM Ti-6Al-4V alloy to the level of wrought Ti-6Al-4V alloy.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.159-166
• /
• 2012

There are several ways such as GPS(Global Positioning System) and INS (Inertial Navigation System) to track the location of moving vehicle. The GPS has the advantages of having non-accumulative error even if it brings about errors. In order to obtain the position information, we need to receive at least 3 satellites information. But, the weak point is that GPS is not useful when the 혠 signal is weak or it is in the incommunicable region such as tunnel. In the case of INS, the information of the position and posture of mobile with several Hz~several hundreds Hz data speed is recorded for velocity, direction. INS shows a very precise navigational performance for a short period, but it has the disadvantage of increasing velocity components because of the accumulated error during integration over time. In this paper, sensor fusion algorithm is applied to both of INS and GPS for the position information to overcome the drawbacks. The proposed system gets an accurate position information from experiment using SVD in a non-accessible GPS terrain.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2019-2023
• /
• 2005

In this paper, an autonomous omni directional cleaning robot which recognizes an obstacle and a battery charger is introduced. It utilizes a robot vision, ultra sonic sensors, and infrared sensors information along with appropriate algorithm. Three omni-directional wheels make the robot move any direction, enabling a faster maneuvering than a simple track typed robot. The robot system transfers command and image data through Blue-tooth wireless modules to be operated in a remote place. The robot vision associated with sensor data makes the robot proceed in an autonomous behavior. An autonomous battery charger searching is implemented by using a map-building which results in overcoming the error due to the slip on the wheels, and camera and sensor information.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.174-177
• /
• 1995

Detecting a small threat object either fast moving or floating on shallow water presents a formidable challenge to shipboard sensor systems, which must determine whether or not to launch defensive weapons in a timely manner. An integrated multisensor concept is envisioned wherein the combined use of active and passive sensor is employed for the detection of short duration targets in dense ocean surface clutter to maximize detection range. The objective is to develop multisensor integration techniques that operate on detection data prior to track formation while simultaneously fusing contacts to tracks. In the system concept, detections from a low grazing angle search radar render designations to a sensor-search infrared sensor for target classification which in turn designates an active electro-optical sensor for sector search and target verification.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.1
• /
• pp.73-81
• /
• 2003

An autonomous stair robot recognizing the stair, and climbing up and down the stair by utilizing a robot vision, photo sensors, and appropriate climbing algorithm is introduced. Four arms associated with four wheels make the robot climb up and down more safely and faster than a simple track typed robot. The robot can adjust wheel base according to the stair width, hence it can adopt to a variable width stair with different algorithms in climbing up and down. The command and image data acquired from the robot are transferred to the main computer through RF wireless modules, and the data are delivered to a remote computer via a network communication through a proper data compression, thus, the real time image monitoring is implemented effectively.