• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.1
• /
• pp.9-19
• /
• 2012

A set of equations of motion is derived for vibratory motions of an underwater cable connected to a moving vehicle at one end and with drogues at the other end. From the static analysis, cable configurations are obtained for different vehicle speeds and towing pretensions are determined by fluid resistance of drogues. Also the dynamic analysis is required to predict its vibratory motion. Nonlinear fluid drag forces greatly influence the dynamic tension. In this study, a numerical analysis program was developed to find out the characteristic of cable behaviour. The motion is described in terms of space and time coordinates based on Chebyshev polynomial expansions. For the spatial integration the collocation method is employed and the Newmark method is applied for the time integration. Dynamic tensions, displacements, velocities, accelerations were predicted in the time domain while natural frequencies and transfer functions were obtained in the frequency domain.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.6
• /
• pp.489-495
• /
• 2003

Single towed line array receiver contains an ambiguity on conjugate bearings because of lacking aperture in transverse direction. To solve the left/right bearing ambiguity of line array receiver this paper proposed using single line array with fixed cardioid beam. Fixed cardioid beam has problem about back beam gain exists for steering beam inherent. Back beam is makes form on direction that is different from actually source so that reduced the performance of left/right bearing discrimination. In this paper, line way with adaptive cardioid beam for resolve problem of back beam gain is proposed. So the proposed method has more improved left/right bearing discrimination than fixed cardioid beam, Simulation results show the performance of the proposed method.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.255-262
• /
• 2020

In modern passive sonar systems, a towed array sensor is used to minimize the effects of own ship noise and to get a higher SNR. The thin and long towed array sensor can be guided in a non-linear form according to the maneuvering of tow-ship. If this change of the array shape is not considered, the performance of beamformer may deteriorate. In order to properly beamform the elements in the array, an accurate estimate of the array shape is required. Various techniques exist for estimating the shape of the linear array. In the case of a method using a heading sensor, the estimation performance may be degraded due to the effect of heading sensor noise. As means of removing this potential error, weighted polynomial fitting technique for estimating array shape is developed here. In order to evaluate the performance of proposed method, we conducted computer simulation. From the experiments, it was confirmed that the proposed method is more robust to noise than the conventional method.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.2E
• /
• pp.78-86
• /
• 2003

We analyzed the measured acoustic field to explore the characteristics of a horizontal coherence in shallow water. Signal spatial coherence data were obtained in the continental shelf off the east coast of Korea using a horizontal line array. The array was deployed on the bottom of 130 m water depth and a sound source was towed at 26 m depth in the source-receiver ranges of 1-13 ㎞. The source transmitted 200 ㎐ pure tone. Topography and temperature profiles along the source track were measured to investigate the relationship between the horizontal coherence and environment variations. The beam bearing disturbance and array signal gain degradation is examined as parameters of horizontal coherence. The results show that the bearing disturbance is about ± 8° and seems to be affected by temporal variations of temperature caused by internal waves. The array signal gains show degradation more than 5㏈ by the temporal and spatial variations of temperature and by the down-sloped topography.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.228-236
• /
• 2014

Towed array SONAR is deformed because it operates in fluid such as an ocean. It especially undergoes significant change in shape as a towing vessel takes a turn. In this case, beam pattern synthesis of the line array is limited, resulting in degradation in quality such as signal-to-noise ratio. This paper presents a modified two-step least squares algorithm based on the two-step least squares method. The shape of the sea-operated line array formation with the towing vessel changing course(angle) was modeled and the algorithm was subsequently applied. While changing course and location of the main lobe in beam pattern was altered, signal-to-noise ratio of steering beam pattern synthesis was analyzed by algorithm (proposed and others). As a result, the proposed algorithm presented improvement in performance by 2dB compared to other algorithms while forming relatively constant beam pattern.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.367-370
• /
• 2000

Various methods of enhancing the performance of passive range sonar arrays have been discussed, triangulation, wavefront curvature method etc. But they are not appropriate to the methods because of very low SNR in underwater environment. We made appropriate sub-arrays in a linear array and applied to the beamformers such as a minimum variance with null constraints.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.6
• /
• pp.427-435
• /
• 2016

Array Gain (AG) is a metric to measure the performance of an array of acoustic sensors. AG is affected by the configuration of array, frequency and array element spacing, and the directivity of the ambient noise. In this paper, an algorithm to calculate AG based on the spatial coherence is used, and the results are verified through sea-going experiment. The method using the spatial coherence can be used to consider the arbitrary shape of an array and directionality of ambient noise. In the sea-going experiment, the towed source was used to transmit the Continuous Wave (CW), and was received at the horizontal line array on the seabed. The ambient noise was measured between the source transmission. The experimental AG was calculated from the SNR (Signal to Noise Ratio) of single sensor and an array of sensors. Finally, the predicted AG is shown to agree with the experimental value of AG.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.2
• /
• pp.32-42
• /
• 1998

본 논문은 비균일 분포 수동형 견인 배열 센서를 사용하여 입사각 추정은 물론, 도 플러 주파수를 동시에 추정해내기 위한 기법을 제안한다. 균일 선형 센서 배열을 사용하는 전통적인 수동형 견인 센서 배열 처리기법은 센서간의 등 간격 구조 및 단순한 표본 과정에 기인하여 활용 분야의 한계성을 가지며, 주된 응용 분야가 방사된 음향신호의 입사각을 추 정하는데만 국한되어 사용될 수 있다는 문제점을 내포하고 있다. 이러한 사실 때문에, 수중 천해 환경 하에서 견인함의 등속 이동에 의해 발생하는 도플러 주파수들에 대한 정보는 목 표물에 대한 식별이나 음향신호 전달 경로의 모델링에 중요한 매개변수로 작용하며, 일반적 인 수동형 견인 센서 배열의 사용에 의한 처리 방식으로는 이러한 매개변수의 추출이 불가 능하게 된다. 본 논문은 이러한 제한성을 극복하고 방사 신호들의 개별적인 입사각 및 도플 러 주파수의 동시 추정을 가능케하도록 비균일 분포의 선형 센서 배열과 Sample Skipping 기법(Sample Skipping Technique;SST)을 적용한 새로운 형태의 수동형 견인 배열 센서 처 리 기법을 제안한다.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.546-554
• /
• 2021

In the signal processing of synthetic aperture sonar, it is subject that the platform in which the sensor array is installed moves along the straight line path. In practical operation in underwater, however, the sensor platform will have trajectory disturbances, diverting from the line path. It causes phase errors in measured signals and then produces deteriorated SAS images. In this study, in order to develop towed SAS, as tools to remove the phase errors associated with the trajectory disturbances of the towfish, motion compensation technique using Redundant Phase Center (RPC) and also Phase Gradient Autofocus (PGA) method is investigated. The performances of these two approaches are examined by means of a simulation for SAS system having a sway disturbance.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.50-59
• /
• 2007

The advent of towed geo-electrical array surveying on water and land has resulted in datasets of magnitude approaching that of airborne electromagnetic surveying and most suited to 1D inversion. Robustness and complete automation is essential if processing and reliable interpretation of such data is to be viable. Sharp boundaries such as river beds and the top of saline aquifers must be resolved so use of smoothness constraints must be minimised. Suitable inversion algorithms must intelligently handle low signal-to-noise ratio data if conductive basement, that attenuates signal, is not to be misrepresented. A noise-level aware inversion algorithm that operates with one elastic thickness layer per electrode configuration has been coded. The noise-level aware inversion identifies if conductive basement has attenuated signal levels so that they are below noise level, and models conductive basement where appropriate. Layers in the initial models are distributed to span the effective depths of each of the geo-electric array quadrupoles. The algorithm works optimally on data collected using geo-electric arrays with an approximately exponential distribution of quadrupole effective depths. Inversion of data from arrays with linear electrodes, used to reduce contact resistance, and capacitive-line antennae is plausible. This paper demonstrates the effectiveness of the algorithm using theoretical examples and an example from a salt interception scheme on the Murray River, Australia.