• Journal of information and communication convergence engineering
• /
• 제9권1호
• /
• pp.78-82
• /
• 2011

This paper proposes a new circuit for capacitive sensing based on Dickson's charge pump. The proposed touch sensing circuit includes three stages of NMOS diodes and capacitors for charge transfer. The proposed circuit which has a simplified capacitive touch sensor model has been analyzed and simulated by Spectre using Magna EDMOS technology. Looking from the simulation results, the proposed circuit can effectively be used as a capacitive touch sensing circuit. Moreover, a simple structure can provide maximum flexibility for making a digitally-controlled touch sensor driver with lowpower operations.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.875-877
• /
• 2011

본 논문에서는 개선된 charge pump 회로를 이용하여 구성한 터치스크린 패널 드라이버를 소개한다. 터치 패널 드라이버는 크게 터치를 감지하는 아날로그 센싱 부분과 감지된 신호를 처리하는 디지털 신호 처리 부분으로 이루어진다. 제안된 터치스크린 드라이버의 동작을 확인하기 위하여 혼성 모드로 회로를 구성하고 Cadence Spectre를 이용하여 그 동작을 검증하였다. 디지털 회로 부분은 Verilog-A 모델링하여 아날로그 부분과의 인터페이스가 가능하게 하여, 그 동작을 검증함으로써 동작의 신뢰성을 확보하였고 시뮬레이션 시간을 줄일 수 있었다. 시뮬레이션 결과 ADC가 없는 간단한 구조의 디지털 신호 변환으로 터치 패널 드라이버의 안정적인 동작을 확인하였다.

• 한국정보통신학회논문지
• /
• 제16권2호
• /
• pp.319-324
• /
• 2012

본 논문에서는 개선된 charge pump 회로를 이용하여 구성한 2-dimensional 터치스크린 패널 드라이버를 소개한다. 개선된 전정 센싱 회로는 charge pump 회로의 중간노드 전하 축적을 제거하여 출력 전압 표류 현상을 효과적으로 없앤다. 터치 패널 드라이버는 터치를 감지하는 아날로그 센싱 부분과 감지된 신호를 처리하는 디지털 신호 처리 부분으로 이루어진다. 제안된 터치스크린 드라이버의 동작을 확인하기 위하여 혼성 모드로 회로를 구성하고 Cadence Spectre를 이용하여 그 동작을 검증하였다. 디지털 회로 부분은 Verilog-A로 모델링하여 아날로그 회로와 인터페이스가 가능하게 하여 전체 회로 동작을 검증함으로써 혼성모드 회로 동작의 신뢰성을 확보하였고 시뮬레이션 시간을 단축할 수 있었다. 시뮬레이션 결과 개선된 전정 센싱 회로를 이용한 제안된 구조의 터치 패널 드라이버의 안정적인 동작을 확인하였다.

• 공학교육연구
• /
• 제13권5호
• /
• pp.36-40
• /
• 2010

The vehicle oriented block box system based on the u-healthcare and the human-free guard functions is developed in this paper. We also suggested the design philosophies, ideas, and analyzed the performance of the suggested system. The developed vehicle oriented black box system has some characteristics such as; 1) detects the dangerous situation by ultrasonic sensor in advance, and stores the situation information of the neighborhood of the vehicle to the imbedded SD memory card if the dangerous situation may be occurred in the parked vehicle; 2) detects the present location and speed information of the vehicle by GPS receiver and 3-axes acceleration sensor, and stores the information to the SD memory card periodically if the vehicle is running; 3) measures the dioxide carbon in the vehicle inside using $CO_2$ sensor, and forces the ventilation motor of the vehicle to operate and maintains the driver's health if the measured level is more than standard health requirements; 4) provides the stored vehicle's operating information to the driver by GUI (Graphical User Interface) based touch LCD monitor.

• Journal of Information Processing Systems
• /
• 제3권1호
• /
• pp.16-20
• /
• 2007

This paper describes the development of the sensor interface and driver program for a point of care (POC) device. The proposed pac device comprises an ARM9 embedded processor and eight-channel sensor input to measure various bio-signals. It features a user-friendly interface using a full-color TFT-LCD and touch-screen, and a bluetooth wireless communication module. The proposed device is based on the system on a programmable chip (SOPC). We use Altera's Excalibur device, which has an ARM9 and FPGA area on a chip, as a test bed for the development of interface hardware and driver software.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.850-853
• /
• 2005

This paper presents issues of display hardware architecture, relating to memory, display driver IC architecture, and chip-to-chip interface. To achieve a low power and low cost mobile phone, not only the display architecture must be carefully selected, but also the driver-ICs optimized to accommodate the different modes of operation found in typical handheld devices. The technique of forming a photo sensor in each pixel using TFT and display module architecture are developed to add multi functions in display such as fingerprint recognition, image scanning, and integrated touch screen. Detailed architectures of IC partitioning, high-speed serial interface, D/A converter, and multi functions such as fingerprint recognition and image scanning using photo sensors are important to a power optimized system.

• 대한임베디드공학회논문지
• /
• 제14권3호
• /
• pp.143-150
• /
• 2019

In this paper, we have developed a module that prevents a driver from using mobile phone while driving. The module is equipped with a vibration sensor to determine if the vehicle is running, a BLE module to transmit the status of the module and a speaker to transmit audible/unaudible sound to the mobile terminal where GUI application is installed. If the vehicle is judged to be moving, the application is activated and the touch function of the mobile phone is blocked. Other data are also transmitted depending on the state of the module, which informs forced module removal, battery failure, or sleep mode of the module.