• Journal of Yeungnam Medical Science
• /
• 제2권1호
• /
• pp.77-80
• /
• 1985

심전도에 의한 R-R 간격변동은 자율신경계의 기능을 검사하는데 매우 유용하고 또한 교감 신경계와 부교감신경계의 가능을 정량적으로 알아낼 수 있을 것으로 사료되었다. 특히, 당뇨병질환에 있어서 자율신경계의 dysfunction현상을 고찰하는데 매우 유용할 것으로 기대된다(Fig.5 참조). 그러나 임상에 직접 적용시켜온 바로는 기립시, 심호흡시에 발생되는 근전도에 의한 잡음이 간혹 발생되는 경우가 있는데 이것은 전극접착법과 무선송신기에 의해 제거될 것으로 기대되며 향후의 과제로 남아있다.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.107-112
• /
• 2008

본 연구에서는 이산계열 대공간구조물의 크기최적화에 따른 후 좌굴거동의 변화에 대하여 조사하고 그 결과를 기술하였다. 본 연구에서는 35개의 부재를 가지는 얕은 아치형 2차원 공간트러스 구조물을 이용하여 연구를 수행하였다. 먼저 트러스의 최적의 부재 크기 패턴을 조사하기 위하여 수학적 프로그래밍 기법을 도입하였다. 이때 최소화해야하는 트러스의 전체 부재의 중량을 목적함수로 이용하고 하중이 가해지는 절점에서 발생하는 변위 값과 각 부재에서 발생하는 응력 값을 허용치 이하로 제한하는 제약조건으로 사용하였다. 크기최적화에서 도출된 트러스 구조물의 후좌굴 거동은 통합 비선형해석기법을 이용하여 조사 분석하였다. 본 연구에서 제시한 결과는 이산계열 대공간구조물의 설계에 기본 데이터로 유용하게 사용될 것으로 판단된다.

• 한국수산과학회지
• /
• 제20권2호
• /
• pp.89-94
• /
• 1987

쓰시마난류역 연안 8개 지점과 30년간 $(1941\~1970)$ 표면수온과 이상수온에 대한 경험적 직교함수(EOF) 분석을 통하여 수온의 시공간적 변동을 구명하였다. 본 해역 표면수온 계절변동의 전반적 양상은 전체 변동량의 $97.2\%$를 설명하는 제 1 EOF 모드로 기술된다. 표면수온 계절변동의 연교차는 상류에서 작고 하류에서 크다. EOF 분석에 의하면, 쓰시마난류역 표면이상수온은 전해역이 동시적으로 승강하는 변동 (전체 변동량의 $40.9\%$)과 상류역과 하류역의 이상수온승강이 반대인 "교차적 변동"(전체 변동량의 $19.3\%$)의 합으로 나타낼 수 있다. 주파수 영역별로 이상수온 변동의 특성을 구명하기 위해 각 관측점의 이상 수온을 중합필터 방법으로 장주기(주기 24개월 이상), 중간주기(주기 $6\~24$개월) 및 단주기(주기 6개월 미만) 영역의 시계열로 분리한 후, 각 주기 영역 이상수온에 대한 별도의 EOF 분석 결과에 의하면, 제 1 및 제 2 EOF 모드의 공간적 분포는 모든 주기 영역에서 비슷하다.

• 대한기계학회논문집A
• /
• 제21권1호
• /
• pp.32-44
• /
• 1997

A moving sliding surface(MSS) was proposed earlier for the second-order variable structure control system(VSCS). The MSS was disigned to pass arbitrary initial conditions, and subsequently moved towards a predetermined sliding surface by rotating and/or shifting. This methodology led to fast and robust control responses of the second-order VSCS, especially in a reaching phase. However, the moving algorithm of the MSS was too complicated to be employed to the high-order VSCS. To resolve this problem, a new moving algorithm based on the fuzzy theory is proposed in this paper. For the generalization of the MSS, the conditions for rotating or shifting are firstly investigated. Then the fuzzy algorithm is formulated by adopting the values of the surface function and the total discontinuity gain as input variables, and the variation of the surface function as output variable. The position control problem of an electrohydraulic servomechanism is adopted in order to demonstrate the efficiency and the feasibility of the proposed MSS associated with fuzzy algorithm.

• 한국주거학회논문집
• /
• 제13권5호
• /
• pp.89-99
• /
• 2002

The multifamily housing has various advantages in construction cost, land-use intensity. KRIHS(1997) recommended the proper scale of th multifamily housing as 800 households in constructability, 1,000 households in facility compactability, 500 households in social aspect. At the early planning stage of project, the size of the multiftmily housing has, until now, been maximizingly considered under the regulation on which has been emphasized at the building volume ratio, land area, etc., except for the expenditure during the maintenance stage. This paper aimed at providing the proper size of multifamily housing in aspect of area and household number with maintenance cost at the early stage of project. For these, it took 곧 average cost function which is made from the 3-rd quardratic form and analyzes the unit increasing rate of the average cost. It surveyed in nationwide focused on the central heating system using diesel and kerosene. The number of samples is 88 and items of management cost is 11. The results are as follows ; first, 3rd-order quadratic function is proper at explaining the cost variation, considering the multicollinearity and statistics. Second, the proper size of multifamily housing is recommended with 83,000 $m^2$ on management area, 820 or over the 2,630 household number in aspect of total management cost.

• Geomechanics and Engineering
• /
• 제11권3호
• /
• pp.325-343
• /
• 2016

A total stress-based bounding surface model is developed to predict the undrained behaviour of saturated soft clays under cyclic loads based on the anisotropic hardening modulus field and bounding-surface theories. A new hardening rule is developed based on a new interpolation function of the hardening modulus that has simple mathematic expression and fewer model parameters. The evolution of hardening modulus field is described in the deviatoric stress space. It is assumed that the stress reverse points are the mapping centre points and the mapping centre moves with the variation of loading and unloading paths to describe the cyclic stress-strain hysteresis curve. In addition, by introducing a model parameter that reflects the accumulation rate and level of shear strain to the interpolation function, the cyclic shakedown and failure behaviour of soil elements with different combinations of initial and cyclic stresses can be captured. The methods to determine the model parameters using cyclic triaxial compression tests are also studied. Finally, the cyclic triaxial extension and torsional shear tests are performed. By comparing the predictions with the test results, the model can be used to describe undrained cyclic stress-strain responses of elements with different stress states for the tested clays.

• 한국해양공학회지
• /
• 제20권4호
• /
• pp.31-36
• /
• 2006

Numerical schemes for spacing and time are tested to accurately simulate the wave propagation. The tested numerical schemesinclude 2nd-order central differencing, l-order upwind scheme, 2nd-order Leith scheme, 3rd-order MUSCLE, QUICK and QUICKEST schemes in spacing and the Euler and 4th-order Runge-Kutta(R-K) schemes in time. It is seen that more accurate results are expected when the higher-order schemes, especially the schemes combined with a TVD control limiter, are used for solving the wave equation. The 3rd-order upwind scheme with limiter and the 4th-order R-K scheme in tim￡ are finally applied to the wave-making simulation in a digital wave tank.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권6호
• /
• pp.645-653
• /
• 2021

With the recent development of precision medicine(Theranostics), interest and utilization of the quantitative function of SPECT/CT are increasing. This study aims to investigate the effect on the radioactivity concentration estimate by the increase or decrease in the total time of SPECT/CT imaging conditions. A standard image was obtained by the conditions of a total acquisition time of 600 sec(10 sec/f × 120 frames) by diluting ^99mTc 91.76 MBq in a cylindrical phantom filled with sterile water, and a comparative image was obtained by increasing the total acquisition time by -90%, -75%, -50%, -25%, +50%, +100%. The CNR, radioactive concentration estimate(cps/ml), and the variation rate(%) of the recovery coefficient(RC) were analyzed by measuring the overall coefficient of interest in each image. The results[CNR, Radiation Concentration, RC] by the change in the number of projections for each increase or decrease rate(-90%, -75%, -50%, -25%, +50%, +100%) of total acquisition time are as follows. [-89.5%, +3.90%, 1.04] at -90%, [-77.9%, +2.71%, 1.03] at -75%, [-55.6%, +1.85%, 1.02] at -50%, [-33.6%, +1.37%, 1.01] at -25%, [-33.7%, +0.71%, 1.01] at +50%, [+93.2%, +0.32%, 1.00] at +100%. and also The results[CNR, Radiation Concentration, RC] by the acquisition time change for each increase or decrease rate(-90%, -75%, -50%, -25%, +50%, +100%) of total acquisition time are as follows. [-89.3%, -3.55%, 0.96] at -90%, [-73.4%, -0.17%, 1.00] at -75%, [-49.6%, -0.34%, 1.00] at -50%, [-24.9%, 0.03%, 1.00] at -25%, [+49.3%, -0.04%, 1.00] at +50%, [+99.0%, +0.11%, 1.00] at +100%. Image quality(CNR) showed a pattern of change in proportion to the increase or decrease in the total acquisition time of SPECT/CT, but the result at quantitative evaluation showed a change of less than 5% in all experimental conditions, maintaining quantitative accuracy(RC less than 0.05) without much influence.

• Journal of Korean Neurosurgical Society
• /
• 제50권6호
• /
• pp.486-491
• /
• 2011

Objective : Structural genetic variation, including copy-number variation (CNV), constitutes a substantial fraction of total genetic variability, and the importance of structural variants in modulating susceptibility is increasingly being recognized. CNV can change biological function and contribute to pathophysiological conditions of human disease. Its relationship with common, complex human disease in particular is not fully understood. Here, we searched the human genome to identify copy number variants that predispose to moya-moya type cerebrovascular disease. Methods : We retrospectively analyzed patients who had unilateral or bilateral steno-occlusive lesions at the cerebral artery from March, 2007, to September, 2009. For the 20 subjects, including patients with moyamoya type pathologies and three normal healthy controls, we divided the subjects into 4 groups : typical moyamoya (n=6), unilateral moyamoya (n=9), progression unilateral to typical moyamoya (n=2) and non-moyamoya (n=3). Fragmented DNA was hybridized on Human610Quad v1.0 DNA analysis BeadChips (Illumina). Data analysis was performed with GenomeStudio v2009.1, Genotyping 1.1.9, cnvPartition_v2.3.4 software. Overall call rates were more than 99.8%. Results : In total, 1258 CNVs were identified across the whole genome. The average number of CNV was 45.55 per subject (CNV region was 45.4). The gain/loss of CNV was 52/249, having 4.7 fold higher frequencies in loss calls. The total CNV size was 904,657,868, and average size was 993,038. The largest portion of CNVs (613 calls) were 1M-10M in length. Interestingly, significant association between unilateral moyamoya disease (MMD) and progression of unilateral to typical moyamoya was observed. Conclusion : Significant association between unilateral MMD and progression of unilateral to typical moyamoya was observed. The finding was confirmed again with clustering analysis. These data demonstrate that certain CNV associate with moyamoya-type cerebrovascular disease.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1993년도 춘계공동학술대회 발표논문 및 초록집; 계명대학교, 대구; 30 Apr.-1 May 1993
• /
• pp.6-15
• /
• 1993

A generalization of one machine maximum lateness minimization problem is considered. There are one achine with controllable speed and n weighting jobs $J_{j}$, j=1, 2, ..., n with ambiguous duedates. Introducing fuzzy formulation, a membership function of the duedate associated with each job $J_{j}$, which describes the satisfaction level with respect to completion time of $J_{j}$. Thus the duedates are not constants as in conventional scheduling problems but decision variables reflecting the fuzzy circumstance of the job completing. We develop the polynomial time algorithm to find an optimal schedule and jobwise machine speeds, and to minimize the total sum of costs associated with jobwise machine speeds and dissatisfaction with respect to completion times of weighting jobs. jobs.