• International Journal of Industrial Entomology and Biomaterials
• /
• v.27 no.2
• /
• pp.271-276
• /
• 2013

The Asian honeybee, Apis cerana, is a native honeybee species in Korea which is important in agriculture for pollination and honey production. For better understanding of the physiology of A. cerana, high-throughput Illumina transcriptome sequencing was performed to analyze the gene expression profiles of queen, worker, and larva. A total of 219,799,682 clean reads corresponding to 22.2 Gb of nucleotide sequences was obtained from the whole body total RNA samples. The Apis mellifera reference mRNA sequence database was used to measure the gene expression level with Bowtie2 and eXpress software, and the Illumina short reads were then mapped to 11,459 out of 11,736 A. mellifera reference genes. Total of 9,221 genes with FPKM value greater than 5 of each sample group were subjected to eggNOG with BLASTX for gene ontology analysis. The differential gene expression between queen and worker, and worker and larva were analyzed to screen the overexpressed genes in each sample group. In the queen and worker sample group, total of 1,766 genes were differentially expressed with 887 and 879 genes overexpressed over two folds in queen and worker, respectively. In the worker and larva sample group, total of 1,410 genes were differentially expressed with 1,009 and 401 genes overexpressed over two folds in worker and larva, respectively.

• Journal of Korean Clinical Nursing Research
• /
• v.25 no.3
• /
• pp.221-236
• /
• 2019

Purpose: The purpose of this study was to systematically review and identify factors relevant to the positive psychological capital of clinical nurses. Methods: These was no limit on year of publication. Articles related to Korean clinical nurses were retrieved from computerized database using a manual search. A systematic review was conducted based on the PRISMA flow. The total correlational effect size (ESr) for each related factor was calculated from Fisher's Zr. Funnel plots, fail-safe numbers, and Egger regression tests were used to evaluate publication bias in meta-analysis studies. The correlational effect size of 25 studies was analyzed through meta-analysis using Comprehensive Meta-Analysis software 3.0 (CMA). Results: The review included 25 studies. In the systematic review, 14 demographic factors and 46 organizational factors were found to be influential. Eleven factors (6 demographic factors and 5 organizational factors) were appropriate for meta-analysis. The overall effect size was .26. The demographic total correlation effect size of related factors was .20 and the total effect size of organization was .46. Organizational commitment (ESr=.38) and job satisfaction (ESr=.54) were statistically positively related variables. Negative variables were burnout (ESr=-.61), turnover intention (ESr=-.41) and workplace bullying (ESr=-.33). The total effect size of the organizational factors was larger than the demographic total effect size. There was no publication bias except for demographic variables. Conclusion: Organizational factors and adjustable variables have a significant impact on positive psychological capital. The results of this study support the need for development of interventions focusing on organizational factors.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.1
• /
• pp.101-108
• /
• 2021

Purpose : The purpose of this study is to verify the effect of selective muscle strengthening of the knee joint extensor muscles using a pressure biofeedback unit to improve knee extensor strength and the balance ability of total knee replacement patients. Through this, we tried to provide clinical information. Methods : In this study, 12 patients with total knee replacement were recruited from a rehabilitation hospital. They were divided into two groups: a feedback group (n=6) and a control group (n=6). All patients received 30 minutes of continuous passive motion and leg-strengthening exercises for 15 minutes five times a week for two weeks. Subjects performed knee extension exercises with or without biofeedback units in the sitting position. The knee extensor strength and balance ability were measured before and after exercise. Knee extensor strength was measured by Biodex system 3 and balance ability was measured by Balancia software. Results : Both the experimental group and the control group showed a significant difference in the muscle strength of the knee joint extensor muscles after intervention (p<.05). In comparison, the experimental group showed a significant difference than the control group (p<.05). Both the experimental group and the control group showed a significant difference in the velocity average, path length, area 95 % center of pressure (COP), weight distribution, five times sit to stand test (FTSST) after intervention. In comparison, the experimental group showed a significant difference in velocity average, area 95 % COP, and FTSST than the control group (p<.05). Conclusion : In order to strengthen the knee extensor muscle and improve the balance ability in total knee replacement patients, it is necessary to consider providing pressure biofeedback unit during leg strengthening exercises.

• 한국사회복지학회:학술대회논문집
• /
• 2004.04a
• /
• pp.261-297
• /
• 2004

Social welfare facilities where provide the socially disadvantaged with proper social services, face financial difficulties. This is because not only of the lack of governmental support, but also of social welfare facilities' lack of skills in developing abundant resources from the private sector. In this context, this study tried to find factors affecting resource mobilization of the social welfare facilities to devise policies in resource development. Mail survey was conducted with the structured questionnaire. Employees in charge of community resource development were asked to answer the questionnaire. The study population were two types of welfare facilities: community welfare centers and residential care facilities. A total of 293 community welfare centers and 632 residential care facilities responded to the survey. The response rate was about 62%. The dependent variable of the study was the amount of resource mobilization in the year 2001 which was measured as the number of donors, the total amount of donation, and estimated amount of gift-in-kind. Three types models were constructed per each welfare facility. Independent variables were selected based on the previous research findings: community environment factor, structural factor, and resource development factor. Multiple regression was utilized to analyze the data. The resource development factor turned out to be significant variable in various models. In the models of donors, the amount of donation, and the amount of gift-in-kind, at least one out of four variables in the resource development factor was significant. Welfare centers which establish the resource development department or hire employees to take care of resource development, and adopt computer software in managing donors, receive more donations than their counterparts. Interestingly, the centers where employees take the responsibility of resource development as well as other responsibilities (dual duty), did not have more resources mobilized than those with no employees for resource development. Using computer software in managing donors turned out to be a significant variable in many models, except for the donor model. In addition, residential care facilities located in urban area have more donors and donations, and among residential facilities those for the elderly, children, and the mentally retarded and those hiring more employees, receive more donations than those for the disabled and those hiring less employees. As for the gift-in-kind model, the centers located in high income area and residential facilities for the elderly, women and mentally retarded receive less gift-in-kind than those for the disabled. Based on the above findings, this study suggested that to mobilize resources the welfare centers as well residential care facilities need to have community resource development department or resource development staffs, and adopt computer software to systematically organize donors.

• Journal of radiological science and technology
• /
• v.39 no.2
• /
• pp.143-148
• /
• 2016

The purpose of this study was examined the measurement error factor on AMARES of jMRUI method for magnetic resonance spectroscopy (MRS) quantitative analysis by skilled and unskilled observer method and identified the reason of independent observers. The Point-resolved spectroscopy sequence was used to acquired magnetic resonance spectroscopy data of 10 weeks male Sprague-Dawley rat liver. The methylene protons ($(-CH_{2-})n$) of 1.3 ppm and water proton ($H_2O$) of 4.7 ppm ratio was calculated by LCModel software for using the reference data. The seven unskilled observers were calculated total lipid (methylene/water) using the jMRUI AMARES technique twice every 1 week, and we conducted interclass correlation coefficient (ICC) statistical analysis by SPSS software. The inter-observer reliability (ICC) of Cronbach's alpha value was less than 0.1. The average value of seven observer's total lipid ($0.096{\pm}0.038$) was 50% higher than LCModel reference value. The jMRUI AMARES analysis method is need to minimize the presence of the residual metabolite by identified metabolite MRS profile in order to obtain the same results as the LCModel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.182-192
• /
• 2010

This paper proposes the hardware IP design of JBIG2 encoder. In order to facilitate the next generation FAX after the standardization of JBIG2, major modules of JBIG2 encoder are designed and implemented, such as symbol extraction module, Huffman coder, MMR coder, and MQ coder. ImpulseC Codeveloper and Xilinx ISE/EDK program are used for the synthesis of VHDL code. To minimize the memory usage, 128 lines of input image are processed succesively instead of total image. The synthesized IPs are downloaded to Virtex-4 FX60 FPGA on ML410 development board. The four synthesized IPs utilize 36.7% of total slice of FPGA. Using Active-HDL tool, the generated IPs were verified showing normal operation. Compared with the software operation using microblaze cpu on ML410 board, the synthesized IPs are better in operation time. The improvement ratio of operation time between the synthesized IP and software is 17 times in case of symbol extraction IP, and 10 times in Huffman coder IP. MMR coder IP shows 6 times faster and MQ coder IP shows 2.2 times faster than software only operation. The synthesized H/W IP and S/W module cooperated to succeed in compressing the CCITT standard document.

• Clinical and Experimental Pediatrics
• /
• v.64 no.9
• /
• pp.480-488
• /
• 2021

Background: An adequate large-scale pediatric cohort based on nationwide administrative data is lacking in Korea. Purpose: This study established the National Investigation of Birth Cohort in Korea study 2008 (NICKs-2008) based on data from a nationwide population-based health screening program and data on healthcare utilization for children. Methods: The NICKs-2008 study consisted of the Korean National Health Insurance System (NHIS) and the National Health Screening Program for Infants and Children (NHSPIC) databases comprising children born in 2008 (n=469,248) and 2009 (n=448,459) in the Republic of Korea. The NHIS database contains data on age, sex, residential area, income, healthcare utilization (International Classification of Diseases10 codes, procedure codes, and drug classification codes), and healthcare providers. The NHSPIC consists of 7 screening rounds. These screening sessions comprised physical examination, developmental screening (rounds 2-7), a general health questionnaire, and age-specific anticipatory guidance. Results: During the 10-year follow-up, 2,718 children (0.3%) died, including more boys than girls (hazard ratio, 1.145; P<0.001). A total of 848,048 children participated in at least 1 of the 7 rounds of the NHSPIC, while 96,046 participated in all 7 screening programs. A total of 823 infants (0.1%) weighed less than 1,000 g, 3,177 (0.4%) weighed 1,000-1,499 g, 37,166 (4.4%) weighed 1,500-2,499 g, 773,081 (91.4%) weighed 2,500-4,000 g, and 32,016 (5.1%) weighed over 4,000 g. There were 23,404 premature babies (5.5%) in 2008 compared to 23,368 (5.6%) in 2009. The developmental screening test indicated appropriate development in 95%-98% of children, follow-up requirements for 1%-4% of children, and recommendations for further evaluation for 1% of children. Conclusion: The NICKs-2008, which integrates data from the NHIS and NHSPIC databases, can be used to analyze disease onset prior to hospitalization based on information such as lifestyle, eating habits, and risk factors.

• International Journal of Vascular Biomedical Engineering
• /
• v.2 no.1
• /
• pp.11-16
• /
• 2004

Both flow visualizations and computational fluid dynamics were performed to determine hemodynamics in a total cavopulmonary connection (TCPC) model for surgically correcting congenital heart defects. From magnetic resonance images, an anatomically correct glass model was fabricated to visualize steady flow. The total flow rates were 4, 6 and 8L/min and flow rates from SVC and IVC were 40:60. The flow split ratio between LPA and RPA was varied by 70:30, 60:40 and 50:50. A pressure-based finite-volume software was used to solve steady flow dynamics in TCPC models. Results showed that superior vena cava(SVC) and inferior vena cava(IVC) flow merged directly to the intra-atrial conduit, creating two large vortices. Significant swirl motions were observed in the intra-atrial conduit and pulmonary arteries. Flow collision or swirling flow resulted in energy loss in TCPC models. In addition, a large intra-atrial channel or a sharp bend in TCPC geometries could influence on energy losses. Energy conservation was efficient when flow rates in pulmonary branches were balanced. In order to increase energy efficiency in Fontan operations, it is necessary to remove a flow collision in the intra-atrial channel and a sharp bend in the pulmonary bifurcation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.41.1-41.6
• /
• 2019

Backgrounds: The purpose of this study is to discuss the total joint reconstruction surgery for a patient with recurrent ankylosis in bilateral temporomandibular joints (TMJs) using three-dimensional (3D) virtual surgical planning, computer-aided manufacturing (CAD/CAM)-fabricated surgical guides, and stock TMJ prostheses. Case presentation: A 66-year-old female patient, who had a history of multiple TMJ surgeries, complained of severe difficulty in eating and trismus. The 3D virtual surgery was performed with a virtual surgery software (FACEGIDE, MegaGen implant, Daegu, South Korea). After confirmation of the location of the upper margin for resection of the root of the zygoma and the lower margin for resection of the ankylosed condyle, and the position of the fossa and condyle components of stock TMJ prosthesis (Biomet, Jacksonville, FL, USA), the surgical guides were fabricated with CAD/CAM technology. Under general anesthesia, osteotomy and placement of the stock TMJ prosthesis (Biomet) were carried out according to the surgical planning. At 2 months after the operation, the patient was able to open her mouth up to 30 mm without complication. Conclusion: For a patient who has recurrent ankylosis in bilateral TMJs, total joint reconstruction surgery using 3D virtual surgical planning, CAD/CAM-fabricated surgical guides, and stock TMJ prostheses may be an effective surgical treatment option.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.2
• /
• pp.53-61
• /
• 2020

Purpose : We investigated the correlation between body composition and lung function in healthy adults. Methods : This study included 204 healthy adults in whom all measurements were obtained once, and all data were analyzed using the SPSS software for Windows, version 22.0. Pearson's correlation analysis was performed to determine the correlation between body composition (represented by the total body water, protein mass, soft lean mass, mineral mass, basal metabolic rate, fat-free mass, skeletal muscle mass, and body fat percentage) and lung function (represented by the forced vital capacity [FVC], forced expiratory volume in 1 second [FEV₁], the FEV₁/FVC ratio, maximum voluntary ventilation [MVV], maximum expiratory pressure [MEP], and the maximum inspiratory pressure [MIP]). All measurements were obtained by two investigators to improve reliability. A significance level of α=.05 was used to verify statistical significance. Results : Among the lung function measurements obtained in both men and women, the FVC, FEV₁, MVV, and MIP were positively correlated with the total body water, protein mass, soft lean mass, mineral mass, basal metabolic rate, fat-free mass, and skeletal muscle mass in men (p<.05). The FEV₁/FVC ratio was negatively correlated with the total body water, soft lean mass, mineral mass, basal metabolic rate, fat-free mass and the body fat percentage (p<.05). Notably, the FVC, FEV₁, and MVV were positively correlated with the total body water, protein mass, soft lean mass, mineral mass, basal metabolic rate, fat-free mass, and skeletal muscle mass in women (p<.05). Conclusion : This study showed a significant correlation between body composition and lung function in healthy adults. In combination with future studies on lung function, our results can provide objective evidence regarding the importance of prevention of lung disease, and our data can be utilized in rehabilitation programs for patients with respiratory diseases.