• 제목/요약/키워드: total particulate matter

검색결과 303건 처리시간 0.02초

배출가스 저감장치(DPF) 부착에 따른 사회적 편익 추정 (Estimating Social Benefits According to Exhaust Gas Reduction Devices (DPF))

  • 최성규;김용달;김호경;배진민
    • 자동차안전학회지
    • /
    • 제10권3호
    • /
    • pp.27-31
    • /
    • 2018
  • The People have a bad perception about diesel vehicle because of serious air pollution, increase fine dust and global vehicle company's diesel gate. Starting the project in 2005, Ministry of Environment has been supporting that is exhaust gas reduction devices (DPF) on diesel vehicles in the metropolitan area. During the period of 2017.01.01 to 2017.12.31, 10,030 diesel vehicles installed exhaust gas reduction devices (DPF). Among them, 9,921 diesel vehicles that they have sufficient data for analysis were analyzed amount of particulate matter reduction before and after exhaust gas reduction devices (DPF) was installed. Opacity smoke meter measures the concentration of particulate matter. So concentration of particulate matter was converted into a mass unit, and then calculated the total amount of reduced particulate matter. It was estimated that social benefits is costs required to remove it from the total amount of particulate matter.

Characteristics of Nano-Particles Exhausted from Diesel Passenger Vehicle with DPF

  • Park, Yong-Hee;Shin, Dae-Yewn
    • 한국환경보건학회지
    • /
    • 제32권6호
    • /
    • pp.533-538
    • /
    • 2006
  • The nano-particles are known to influence the environmental protection and human health. The relationships between transient vehicle operation and nano-particle emissions are not well-known, especially for diesel passenger vehicles with DPF(Diesel Particulate Filter). In this study, two diesel passenger vehicles were measured on a chassis dynamometer test bench. The particulate matter (PM) emission of these vehicles was investigated by number and mass measurement. The mass of the total PM was evaluated using the standard gravimetric measurement method, and the total number concentrations were measured on a ECE15+EUDC driving cycle using Condensation Particle Counter (CPC). According to the investigation results, total number concentration was $1.14{\times}10^{11}$M and mass concentration was 0.71mg/km. About 99% of total number concentration was emitted during the $0{\sim}400s$ because of engine cold condition. In high temperature and high speed duration, the particulate matter was increased but particle concentration was emitted not yet except initial engine cold condition According to DPF performance deterioration, the particulate matter was emitted 2 times and particle concentration was emitted 32 times. Thus DPF performance deterioration affects particle concentration more than PM.

청소년 알레르기질환과 미세먼지의 관련성 (The Relationship between Particulate Matter and Allergic Disease among Adolescents)

  • 김은경
    • 한국학교보건학회지
    • /
    • 제33권3호
    • /
    • pp.148-155
    • /
    • 2020
  • Purpose: The study was performed to identify the relationship between particulate matter and allergic diseases among adolescents in South Korea. Methods: The study used the raw data from the Korean Youth Risk Behavior Web-Based Survey which was performed in 2018. The data of a total of 60,040 students were analyzed, using SPSS 21, by descriptive statistics, t-test, χ2 test, and logistic regression. Results: Allergic diseases among adolescents were showed to be significantly related to gender, age, school record, stress, BMI, insufficient sleep, depression, current drinking, current smoking, and particulate matter concentrations. Conclusion: The findings suggest that a health promotion program that considers particulate matter concentrations be developed to improve the health status of adolescents with allergic diseases.

고형연료제품 사용시설에서 배출되는 미세먼지 입경분율 분석 (Analysis of the Fine Particulate Matter Particle Size Fraction Emitted from Facilities Using Solid Refuse Fuel)

  • 유한조;정연훈;김진길;신형순;임윤정;이상수;손해준;임삼화;김종수
    • 한국환경보건학회지
    • /
    • 제46권6호
    • /
    • pp.719-725
    • /
    • 2020
  • Objectives: With the growth of national interest in fine particulate matter, many complaints about pollutants emitted from air pollution emitting facilities have arisen in recent years. In particular, it is thought that a large volume of particulate pollutants are discharged from workplaces that use Solid Refuse Fuel (SRF). Therefore, particulate contaminants generated from SRF were measured and analyzed in this study in terms of respective particle sizes. Methods: In this study, particulate matter in exhaust gas was measured by applying US EPA method 201a using a cyclone. This method measures Filterable Particulate Matter (FPM), and does not consider the Condensable Particulate Matter (CPM) that forms particles in the atmosphere after being discharged as a gas in the exhaust gas. Results: The mass concentration of Total Suspended Particles (TSP) in the four SRF-using facilities was 1.16 to 11.21 mg/Sm3, indicating a very large concentration deviation of about 10 times. When the fuel input method was the continuous injection type, particulate matter larger than 10 ㎛ diameter showed the highest particle size fraction, followed by particulate matter smaller than 10 ㎛ and larger than 2.5 ㎛, and particulate matter of 2.5 ㎛ or less. Contrary to the continuous injection type, the batch injection type had the smallest particle size fraction of particulate matter larger than 10 ㎛. The overall particulate matter decreased as the operating load factor decreased from 100% to 60% at the batch input type D plant. In addition, as incomplete combustion significantly decreased, the particle size fraction also changed significantly. Both TSP and heavy metals (six items) satisfied the emissions standards. The measured value of the emission factor was 38-99% smaller than the existing emissions factor. Conclusions: In the batch injection facility, the particulate matter decreased as the operating load factor decreased, as did the particle size fraction of the particulate matter. These results will help the selection of effective methods such as reducing the operating load factor instead of adjusting the operating time during emergency reduction measures.

미세먼지 in vivo 모델에서 호흡기 질환에 대한 한약의 효과에 관한 연구 동향 분석 (Review on the Effects of Herbal Medicine on Respiratory Diseases in In Vivo Particulate Matter Models)

  • 우성천;이수원;박양춘
    • 대한한방내과학회지
    • /
    • 제44권3호
    • /
    • pp.418-438
    • /
    • 2023
  • Objective: This study was conducted to review the effects of herbal medicine on respiratory diseases induced by the treatment of particulate matter in in vivo animal models. Methods: Literature searches were performed in seven databases (Pubmed, Embase, Cochrane Library, KISS, KTKP, OASIS, and ScienceON). After the searched studies were screened based on the inclusion/exclusion criteria, the publication date, origin, used animals, induction of particulate matter models, herbal medicine used for intervention, study design, outcome measure, and results of studies were analyzed. Results: Among a total of 972 studies primarily searched, 34 studies were finally included in our study. Of this number, 29 studies induced animal models by using only particulate matter, and 5 studies induced animal models with respiratory diseases, such as asthma and chronic obstructive pulmonary disease, by using particulate matter and other materials. In the selected studies, the treatments of herbal medicine in particulate matter models suppressed oxidative stress and inflammation in lung tissue, bronchoalveolar lavage fluid, and blood as well as lung injury in histological analysis. Conclusion: The results of this study suggest that herbal medicine is effective in treating respiratory diseases induced by particulate matter. These results are also expected to be useful data for designing further studies. However, more systematically designed in vivo studies related to particulate matter are needed.

국내 계사(鷄舍) 작업장 유형에 따른 분진 농도 및 발생량 분포 (Distribution of Concentration and Emission of Dust according to Types of Poultry Buildings in Korea)

  • 김기연
    • 한국환경보건학회지
    • /
    • 제43권3호
    • /
    • pp.185-193
    • /
    • 2017
  • Objectives: An on-site study was conducted in order to quantify indoor exposure levels and the emission rate of particulate matter for domestic poultry buildings. Materials and methods: Three types of poultry building (caged layer house, broiler house, and layer house with manure belt) as classified by mode of manure treatment and ventilation were investigated in this study. Nine sites per each poultry building were selected and visited for measuring exposure levels and emission rate of particulate matter. Total dust and respirable dust among the particulate matter were analyzed based on the weight method. Emission rates were estimated by dividing emission amount, which was calculated through multiplying indoor concentration ($mg/m^3$), by the ventilation rate ($m^3/h$), into indoor area ($m^2$) and number of poultry reared in the poultry building. Results: Mean exposure levels for total dust and respirable dust in the poultry buildings were $3.91({\pm}1.99)mg/m^3$ and $1.99({\pm}0.89)mg/m^3$, respectively. The emission rates of particulate matter in the poultry buildings were estimated as $4.75({\pm}1.22)mg\;head^{-1}h^{-1}$ and $64.39({\pm}24.95)g\;m^{-2}h^{-1}$ for total dust and $0.58({\pm}0.23)mg\;head^{-1}h^{-1}$ and $7.52({\pm}2.51)mg\;m^{-2}h^{-1}$ for respirable dust, respectively. The distribution patterns for total dust and respirable dust were similar regardless of poultry building type. Among poultry buildings, broiler house showed the highest exposure level and emission rate of total dust and respirable dust, followed by layer house with manure belt and caged layer house. Conclusions: The finding that the broiler house showed the highest exposure level and emission rate of particulate matter can be attributed to sawdust utilized as bedding material, which can be dispersed into the air by movements of the chickens. Thus, a work environmental management solution for optimally reducing dust concentrations is necessary for broiler houses.

Association between exposure to particulate matter and school absences in Korean asthmatic adolescents

  • Seongmin Jo;Kiook Baek;Joon Sakong;Chulyong Park
    • Annals of Occupational and Environmental Medicine
    • /
    • 제34권
    • /
    • pp.21.1-21.13
    • /
    • 2022
  • Background: Because particulate matter (PM) and asthma are closely related, the prevalence of school absence among adolescents with asthma can be affected by the concentration of PM. We aimed to investigate the relationship between school absences due to asthma and the total number of days that the PM concentration exceeded the standard. Methods: We used the data from the 16th Korea Youth Risk Behavior Survey and the PM levels of 17 metropolitan cities and provinces gathered from the AirKorea. Information on the characteristics of asthmatic adolescents and the prevalence of school absence was obtained using a questionnaire, while the PM levels based on the total number of days with poor and very poor PM grades were collected from the AirKorea website. Both χ2 test and logistic regression analysis were performed using the weights presented in the original dataset. Results: In the case of particulate matter of 10 microns in diameter or smaller (PM10), the odds ratio (OR) after adjusting for confounders (sex, school year, body mass index, smoking history, diagnosis of allergic rhinitis, diagnosis of atopic dermatitis and city size) was 1.07 (95% confidence interval [CI]: 1.01-1.13) for absents due to asthma when the total days of poor and very poor grades of PM10 (81 ㎍/m3 or higher) increased by 1 day. In the analysis of particulate matter of 2.5 microns in diameter or smaller (PM2.5), the OR after adjusting for confounders was 1.01 (95% CI: 1.00-1.03) for absents due to asthma when the total number of days with poor and very poor PM2.5 grades (36 ㎍/m3 or higher) increased by 1 day. Conclusions: A significant association was observed between the total number of days of poor and very poor PM10 and PM2.5 grades and school absence due to asthma; PM can cause asthma exacerbation and affect the academic life.

공동주택 전열교환기 필터종류 및 두께에 따른 미세먼지 제거율 평가 (Evaluation of Particulate Matter Removal Rate according to Filter Type and Thickness of Total Heat Exchanger in Apartment Houses)

  • 송용우
    • 토지주택연구
    • /
    • 제11권4호
    • /
    • pp.93-98
    • /
    • 2020
  • This study examined the particulate removal performance of three different types of air filters inside a heat exchanger. Of interest was the ability of each filter type in reducing the transmission of outdoor particulate matter of PM10 from entering an apartment while the heat exchanger was in operation. The study tested one commonly used medium filter (E11 grade) and two HEPA filters (H13 grade) of different thicknesses. Two different concentrations of particulate matter were used in the experiment to address different ambient air quality conditions in Korea, 32.75 ㎍/㎥ and 67.26 ㎍/㎥. Study results indicated that under the particulate matter concentration of 32.75 ㎍/㎥, all three filters were capable of removing more than 95% of the fine dust. However at a particulate matter concentration of 67.26 ㎍/㎥, the medium E11 grade filter was only able to remove about 90% of the particulates whereas the HEPA H13 grade filters were able to remove 95% or more of the particulates. The thicker HEPA filter (40T) was also more effective in removing particulates than the thinner HEPA filter (20T) by about 1.6 to 3 percentage points. Based on the findings of this study, it is recommended that HEPA filters of 20T thickness or greater be used during the high air pollution seasons of winter and spring in Korea while medium filters can be used during the other seasons to reduce outdoor air pollution transmission indoors.

조리과정에서 생성된 미세먼지의 크기분포 특성 (Size Distribution Characteristics of Particulate Matter Emitted from Cooking)

  • 주상우;지준호
    • 한국입자에어로졸학회지
    • /
    • 제16권1호
    • /
    • pp.9-17
    • /
    • 2020
  • The characteristics of particulate matter made from daily cooking at a Korean residential apartment house with three dwellers had been investigated for about 3 months. All data were recorded by an optical particle counter every minute at the kitchen. Types of cooking such as boiling, frying, and grilling that performed in the house were listed. Boiling only was used in 32% cases among total 234 meals. Frying and grilling were 14% and 11%, respectively. From an initial indoor particulate matter smaller than 10 ㎛ in diameter, the increases due to cooking are reported by size. In case of boiling, PM at 1-10 ㎛ size and under 1 ㎛ size little increased. Normally, particles from oil or combustion in a process of frying or grilling increased indoor PM. In a case of grilling, particle mass concentration in a region of 1-10 ㎛ in diameter increased as much as 295 ㎍/㎥. Mass concentration of particles smaller than 1 ㎛ increased as much as 33 ㎍/㎥.

제주도 서남방 동중국해에서 하계 입자성부유물 및 표층퇴적물의 C, N 분포 특성 (The Characteristics of suspended particulate matter and surface sediment of C, N in the Northern East China Sea ill summer)

  • 강문규;최영찬
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제6권4호
    • /
    • pp.13-23
    • /
    • 2003
  • Organic carbon and nitrogen contents in suspended particulate matter (SPM) and surface sediments in seawater were measured in the Northern East China Sea in summer. The distribution of particulate organic carbon(POC) and particulate organic nitrogen(PON) were in the ranges of 54~481㎍/ℓ and 6~85㎍/ℓ, respectively, with relatively high level of concentrations in the western and southern sides of the study area. Also, there has been a significantly positive correlation between POC and PON, gradually increasing toward the deeper range of depth. Average C:N ratios of POC and PON of SPM were 6 in study area. The ratios of POC to PON of SPM increased as the range of depth increased, indicating nitrogen decomposes more rapidly than carbon and is considered to be influenced by the input of detritus from surface sediments. The distribution of total organic matter(TOM), total organic carbon(TOC) and total organic nitrogen(TON) in surface sediments were in the ranges of 3.1~9.6%, 0.282~0.635% and 0.022~0.069%, respectively, with relatively low range in the western and northern sides of the study area. The ratio of TOC to TON of surface sediments were in the range of 9.8~17.4(average of 13), strongly indicating the active role of the input from the terrestrial organic pollutants.

  • PDF