• 한국생활과학회지
• /
• 제15권2호
• /
• pp.275-281
• /
• 2006

The purpose of this study is to investigate hand and sensibility of PET treated by Ultra-Violet (UV). The 4-channel PET knit fabric was treated by a self-made UV instrument in 5cm distance with different time frames-0min, 30min, and 90min. For hand evaluation, mechanical properties were measured by the KES-FB system. The environmental condition was controlled at 29$^{\circ}C$, 75% (R.H.)-summer standard climate. Twenty female students evaluated 'roughness', 'smoothness', 'wetness', 'stiffness', 'coolness', 'touch', 'preference', and 'comfort'. The outcomes of the experiment are as follows: The surface roughness of mechanical properties showed significant differences and the value of PET irradiated by UV for 90min was highest. The order of primary hand value such as NUMERI and FUKURAMI was in a following order-Untreated > 30min treated > 90min treated. Total hand value showed that PET irradiated by UV for 90min was appropriate for using summer fabric. The results of subjective sensibility were that the untreated and 30min treated PET were recognized as similar and had a good evaluation on 'comfort', 'preference' and 'the sense of touch'. This consequence disagreed with total hand value, because it was considered that subjects' hand sensibility was dependent on the feel of smoothness.

• 대한인간공학회지
• /
• 제31권4호
• /
• pp.483-492
• /
• 2012

Objective: The aim of this study is to suggest three-dimensional(3D) hand gesture taxonomy to organize the user's intention of his/her decisions on deriving a certain gesture systematically. Background: With advanced technologies of gesture recognition, various researchers have studied to focus on deriving intuitive gestures for commands from users. In most of the previous studies, the users' reasons for deriving a certain gesture for a command were only used as a reference to group various gestures. Method: A total of eleven studies which categorized gestures accompanied by speech were investigated. Also a case study with thirty participants was conducted to understand gesture-features which derived from the users specifically. Results: Through the literature review, a total of nine gesture-features were extracted. After conducting the case study, the nine gesture-features were narrowed down a total of seven gesture-features. Conclusion: Three-dimensional hand gesture taxonomy including a total of seven gesture-features was developed. Application: Three-dimensional hand gesture taxonomy might be used as a check list to understand the users' reasons.

• 한국의류산업학회지
• /
• 제3권2호
• /
• pp.174-179
• /
• 2001

This study investigated the effect of aftertreatments such as using the softener or starch on the mechanical properties of knitted fabrics. The mechanical properties of fabrics, hand value(HV) and total hand value(THV) were measured and calculated by the KES-F system. The main results are as follows: The values of tensile energy(WT), coefficient of friction(MIU) and geometrical roughness(SMD) were increased by softener but decreased by starch treatment. However, the values of tensile linearity(LT), bending(B, 2HB), thickness(T) and weight(W) were increased by starch but decreased by softener treatment. Tensile resilience(RT) was increased not only by softener but also by starch treatment. It showed that the levels of FUKURAMI, NUMERI and SOFUTOSA were increased by the treatment of softener and the levels of KOSHI and SHARI were increased by the treatment of starch. Total hand value(THV) was lower in fabric with starch treatment than fabric with none treatment.

• 한국의류학회지
• /
• 제24권3호
• /
• pp.440-447
• /
• 2000

The effects of DP finishing conditions including process technique and finishing agent on the mechanical properties and hand of cotton fabrics were investigated. 100% cotton fabrics were treated with NMA/DMDHEU and NMA/YF using wet-fixation and steam-fixation process. For comparison, conventional pad-dry-cure process was used with DMDHEU. After DP finishing, tensile and compressional resilience increased and bending hysteresis decreased, resulting in the improvement of dimensional stability of cotton fabric. WF and SF process rendered fabrics better shear properties, tensile energy, and compressional linearity and energy than PDC process. However, SF process produced fabrics with higher geometrical roughness than WF process. After DP finishing, primary hand values except Koshi increased, resulting in the increase of total hand value of cotton fabric.

• 한국환경보건학회지
• /
• 제36권2호
• /
• pp.95-107
• /
• 2010

Hand-washing is one of the major factors in personal hygiene and public health. This study was undertaken to investigate the hygienic behavior of food-service employees, focusing on awareness of hand washing, hand washing practices, and the load of index microorganisms (aerobic plate count, total and fecal coliforms, Escherichia coli, and Staphylococcus aureus) on the hands of food-service employees. A questionnaire survey completed by direct interview, direct observation of restrooms by the researcher and trained observers, and microbiological examination according to the Food Code of Korea were carried out. In the survey, a positive attitude toward hand washing compliance was reported; however, improper hand washing and poor hand hygiene of the food-service employees were seen under direct observation. Significant differences (p<0.05) were found between the questionnaire survey and the direct observations in hand washing compliance after using the toilet, duration of hand washing, use of hand washing agents, use of hand washing tools, washing of different parts of the hands, hand-drying method, temperature of water, and method of turning off the water. Samples taken from employees' hands before washing showed higher levels of bacteria than those taken during work and/or after washing (p<0.05). Poor hand washing practices were indicated by the positive results for total and fecal coliforms, E. coli, and S. aureus on the hands of some food-service employees. This study showed that there is a marked difference between the food-service employees' awareness of hand-washing and their actual hand-washing practices. The poor hand hygiene of and improper hand washing by the food-service employees should be addressed for improved food safety.

• 한국산업보건학회지
• /
• 제5권2호
• /
• pp.147-159
• /
• 1995

This study was conducted to introduce fundamental data of hand-arm vibration and noise exposure levels with impact wrenches(double-hammer impact wrenches and oil-pulse impact wrenches) used in automobile assembly lines considering the process variables and tool variables. In studing, products per day, required time screwing the bolts or nuts per bolts or nut were considered as process variables, and capacity of bolts or nuts, air consumptions per minute, tool weights, RPM were considered as tool variables. Hand-arm vibration levels of 3 axis in each hand were measured using the instruments compling with ISO/DIS 5349 and noise levels were measured using a noise logging dosimeter. The results were as follows : 1. Required time to screwing the bolt or nut by oil-pulse impact wrenches is shorter than double-hammer impact wrenches but total daily exposure time of oil-pulse impact wrenches was higher than double-hammer impact wrenches because the number of bolts or nuts per cycle was many. 2. Oil-pulse impact wrenches have been used to screwing the large bolt or nut in comparing with double-hammer impact wrenches and required time to screwing the bolts or nuts were shorter than double-hammer impact wrenches because oil-pulse impact wrenches were using high RPM and large air consumption per minute. Noise level of oil-pulse impact wrenches was 8 dB(A) lower than double-hammer impact wrenches. 3. Dominant hand-arm vibration levels of double-hammer impact wrenches in each hand were $8.24m/sec^2$ of Zh axis in right hand and $9.60m/sec^2$ of Xh axis in left hand. Dominant hand-arm vibration level of oil-pulse impact wrenches in each hand was $2.59m/sec^2$ of Xh axis in right hand and $3.23m/sec^2$ of Yh axis in left hand. 4. In double-hammer impact wrenches, corresponding hand-arm vibration levels of Xh, Yh, Zh axis in left hand were higher than hand-arm vibration levels of right hand in 3 axis. In oil-pulse impact wrenches, Xh axis of right, Yh axis of left, Zh axis of left were higher than the corresponding hand-arm vibration levels of Xh, Yh, Zh axis in right and left hand. 5. Correlation coefficients among Xh, Yh. Zh axis of right and left hand hand-arm vibration levels in double-hammer impact wrenches and oil-pulse impact wrenches were commonly high in Yh axis and correlation coefficients of Yh axis in double-hammer impact wrenches and oil-pulse impact wrenches were 0.76 and 0.86,respectively. 6. As a measure repetitiveness, plotting total daily exposure time with the number of bolts or nut per cycle, direct correlation was shown between repetitiveness and hand-arn vibration exposure, and correlation coefficient between the number of bolts or nut per cycle and total daily exposure time in double-hammer impact wrenches, oil-pulse impact wrenches were 0.84 and 0.50, respectively. 7. Considering the total acceleration level and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption in right hand, and bolt or nut capacity in left hand were commonly the variable that explainability was high. Considering the noise and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption per minute was commonly the variable that explainability was high.

• 가정∙방문간호학회지
• /
• 제25권2호
• /
• pp.165-174
• /
• 2018

Purpose: The study investigated the knowledge and compliance on hand hygiene moments among nursing care workers in geriatric hospitals. Methods: A total of 143 nursing care workers at geriatric hospitals were selected. Data collection was conducted from February 20 to March 20, 2017. Results: For all hand hygiene scenarios, the total correct answer rate was 71.5%. On the necessary hand hygiene moments, the compliance rate was 68.3%. With respect to the general characteristics of the participants, knowledge on hand hygiene moments showed a statistically significant difference according to clinical career(p=.001), and existence of infection controller or infection control office in the nursing home(p=.038). Compliance showed differences according to clinical career(p=.023), existence of infection controller or infection control office in the nursing home(p=.033), and training experience in hand hygiene(number of times/year)(p=.035). Knowledge and compliance showed a statistically significant positive correlation(r=.90, p<.001). Conclusions: It is necessary to develop and operate an infection control education program that can improve the knowledge and awareness of hand hygiene moments and considers the individual characteristics geriatric hospitals's nursing care workers.

• 대한인간공학회지
• /
• 제31권4호
• /
• pp.541-550
• /
• 2012

Objective: The aim of this study is to suggest a notation method for three-dimensional hand gesture. Background: To match intuitive gestures with commands of products, various studies have tried to derive gestures from users. In this case, various gestures for a command are derived due to various users' experience. Thus, organizing the gestures systematically and identifying similar pattern of them have become one of important issues. Method: Related studies about gesture taxonomy and notating sign language were investigated. Results: Through the literature review, a total of five elements of static gesture were selected, and a total of three forms of dynamic gesture were identified. Also temporal variability(reputation) was additionally selected. Conclusion: A notation method which follows a combination sequence of the gesture elements was suggested. Application: A notation method for three dimensional hand gestures might be used to describe and organize the user-defined gesture systematically.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.216-218
• /
• 2007

Korean Sign Language (KSL) is a communication method for the Deaf in Korea, and hand shape is one of important elements in sign language. In this paper, we developed a KSL hand shape editor to simply compose hand shape and connect it to a database. We can edit hand shape by a graphical user interface (GUI) on 3D virtual reality environment. Hand shape codes are connected to a sign word editor to synthesize sign motion and to decrease total amount of KSL data.

• 대한가정학회지
• /
• 제43권8호
• /
• pp.115-122
• /
• 2005

The hand performs functions such as grabbing and other movements. In order to accomplish these movements in various kinds of operational environments, appropriate gloves must be worn to protect your hands. Choosing the appropriate type of glove is very important when wearing gloves in these types of operational environments. The reasons one wears gloves varies depending on age and gender. Unmarried women in their early twenties, for example, occasionally wear gloves for decoration rather than for functional reasons. However, previous studies examined a range of topics, and as such investigations dealing with specific body shape and demands of consumer are needed. Therefore in this study, the hands of unmarried women ranging in age from 20 to 24 were measured and hand shape types were analyzed in order to present basal data which can be used to help design improved glove patterns and produce appropriate, functional gloves. A total of 261 Korean women were measured. Fifty-seven right hand dimensions were measured and five dimensions from both hands were measured. Six factors were identified through factor analysis and those factors constituted $73.259\%$ of total variance. Two clusters of hand shapes were categorized using 6 factor scores by cluster analysis. Type 1 hand shape is defined as long hands with small width, girth, and thickness, long and thin fingers, and high vertical palm height. Type 2 hand shape is defined as short hands with large width, girth and thickness, short fingers, thick knuckles, and short vertical palm height. The characteristics of type 1 and 2 hand shapes are similar to women's hand type classification results from previous reports, but there was a significant difference in subject distribution by type. Therefore, standard data on hand shapes should be produced by developing measuring instruments and selling more accurate standard measuring points. By doing this it could help in the development of improved glove patterns, and also aid in planning production based on hand type.