• Journal of the Ergonomics Society of Korea
• /
• v.32 no.6
• /
• pp.503-509
• /
• 2013

Objective: The purpose of this study is to analyze the individual finger force between dominant hand and non-dominant hand and to investigate an effect of the individual finger on the total grip strength depending on dominant hand and non-dominant hand. Background: Many studies on the ratio of the grip force between dominant hand and non-dominant hand has been researched. While a 10% rule which is a ratio of the grip force between dominant hand and non-dominant hand has been applied in most studies, studies on the rate of the individual finger force between dominant hand and non-dominant hand have been insufficiently researched. Method: The experiment was preceded with 17 subjects (male, mean 25.8 ages). The individual finger force and total grip strength were measured using pliers being able to change the grip span from 45 to 80mm. Results: The difference of total grip strength between dominant hand and non-dominant hand is following 10% rule. However, the difference of individual finger force between dominant hand and non-dominant hand are not same as the difference of total grip strength. Especially in the case of grip span with 50mm, the differences between total grip strength, index finger, middle finger, ring finger, and little finger were $9.87{\pm}14.80%$, $8.95{\pm}37.17%$, $13.71{\pm}28.27%$, $6.77{\pm}24.35%$, $39.29{\pm}42.46%$, respectively, with p=0.018 of statistical significance. Additionally, the results of regression analysis in 50 and 60mm of grip span showed that the difference in ring finger affected the most to the total grip strength; and the effects followed in order of index finger, middle finger, and little finger. Conclusion: Our study suggests that an effect of individual finger and grip span of pliers have to be considered when explaining the difference of the total grip strength between dominant hand and non-dominant hand. Application: This result is expected to be used for designing ergonomic hand tool.

• Journal of the Korean Home Economics Association
• /
• v.40 no.6
• /
• pp.185-195
• /
• 2002

This study was carried out to investigate the wearing silhouette of jackets according to the mechanical properties, primary hand value and total hand value of the 3 types of wool fabrics. Wool/PET(50/50), wool/PET(80/50) and wool(100%) fabrics were used as test specimens. Mechanical properties of specimens were measured by KES-FB system and primary hand value and total hand value were calculated by equation KN-203-LDY. We made three experimental jackets based on the precious jacket pattern and used Moir Photography to measure the amounts of space between the jacket clothes and body surface from the overlap cross section map. The results were as follows: 1) In mechanical properties, woo/PET(80/20) fabric showed higher bending and shear rigidity. 2) In evaluation of primary hand and total hand, wool 100% fabric showed higher NUMERI and FUKURAMI hand and total hand value. 3) From the reset of Moir Photography, the wearing shapes of the experimental jackets were influenced by the characteristics of fabrics. Except for the hip part, the garment ease of wool/PET(80/20) fabric was estimated more highly.

• The International Journal of Costume Culture
• /
• v.8 no.1
• /
• pp.23-31
• /
• 2005

Mechanical properties and hand evaluation of wool/acrylic(W/A) blend knits were conducted before and after repeated washing to get the optimum W/A blending ratio, which could help achieve the optimum mechanical and hand properties of the knits. The five test fabrics using the yarns with different W/A blending ratios($\%$), 100/0, 70/30, 50/50, 30/70, 0/100, were knitted. The fabrics were washed by a rotating drum type washing machine. Then, objective mechanical and hand properties were evaluated by KES-FB, Kawabata evalution system for fabric. The results are as follows: there was no change in the hand value of the knitted fabric with the W/A-blended yarn caused by the change in the blending ratio before washing. After washing, however, the increase of acrylic's blending rate caused the bending property to decrease proportionally, while the friction coefficient of the surface property increased. Furthermore, the study showed that W/A 50/50 possesses the most superior tensile property and shearing property, which could attain the optimum blending ratio. Similar results in hand value were derived in all the samples. After washing, however, the increase in acrylic's blending rate caused a proportional decrease in KOSHI and an increase in FUKURAMI. In addition, W/A 50/50 gained the biggest NUMERI value, again corresponding to the optimum blending ratio. Similar results in total hand value were derived in all the samples before washing. After washing, though, all the total hand values decreased, and, as the wool fabric's blending rate increased, the total hand values proportionally decreased further.

• Journal of Environmental Health Sciences
• /
• v.45 no.3
• /
• pp.213-221
• /
• 2019

Objective: This study was performed to evaluate gender and age differences in hygienic behavior among the general population, focusing on hand-washing habits and the microbial load of hands. Methods: A self-administered questionnaire survey and a separate microbial examination were performed. The Pearson's correlation between hand-washing habits and microbial load was analyzed. Results: In the questionnaire survey on hand-washing habits, gender differences were found in hand-washing frequency, use of hand-washing agents, and hand drying methods (p<0.05). Age differences were found in numbers of washing parts of the hands and also in hand drying methods (p<0.05). Females showed better habits washing hands than did males, as did older people compared to younger. In the microbial examination of indicator bacteria on their hands, younger people tended to show a higher load of total aerobic bacteria than did the older, and females showed a higher load of total coliforms than did males (p<0.05). There were significant relationships between the load of total aerobic bacteria and hand-washing frequency, duration, and method of turning-off water (p<0.05). Conclusions: Although females were expected to show a better practice of hand-washing than were males based on the survey results, they showed a higher level of total coliforms in the hand examination. The older age group showed better hand-washing habits than did the younger age group and had less total aerobic bacteria on their hands. These inter-gender and age differences highlight the need for development and implementation of gender-and age-specific educational programs or campaigns.

• Korean Journal of Human Ecology
• /
• v.12 no.1
• /
• pp.63-73
• /
• 2003

The purpose of this study was to quantify the hands of fabrics for the Korean folk clothes using both a KES-FB and an artificial neural network. In order to select the proper input parameters, we calculated the correlation using step-wise regression between mechanical properties and the hand value of fabrics. For the classification, the primary hand values and total hand value, five neural networks with three-layered structure were constructed using the error back propagation algorithm and, in order to reduce errors and to speed up learning, the momentum method was selected. From the analysis of the primary and total hands using a self-constructed artificial intelligence system, the error rates of sleekness, stiffness, silkiness, and roughness compared with the judgement of expert panels were found to be 3.3%, 3.3%, 1.6%, and 4.9%, respectively, while that of the total hand was 9.83%.

• Korean Journal of Human Ecology
• /
• v.1 no.2
• /
• pp.119-128
• /
• 1998

Nonwoven fabrics for diaper coverstock were treated with chitosan solution by pad-dry method. Two chitosans of different molecular weigh(Mw) with similar degree of deacetylation(DDA) were used: Mw 1,800(chitosan oligomer, DDA 84%). Effect of chitosan treatment on the mechanical properties was investigated using KES-FB system. Primary hand values were calculated from mechanical properties using the same equation as the men's suiting equation with minor modification, and total hand values were calculated using new KN-5LNW equation for nonwoven fabrics developed by Kawabata et al. Increase in chitosan treatment concentration increased B, 2HB, WT, LT and RC, and decreased WC continuously. Chitosan treatment affected other mechanical properties regardless of molecular weight. Considering primary hand values obtained from mechanical properties, it was found that chitosan of Mw 180,000 and chitosan oligomer provided softer, smoother, and more bulky at below 0.05% and above 0.5% treatment concentration respectively. Samples treated with 1.0% chitosan oligomer solution, and 0.01％ chitosan solution of Mw 180,000 showed the best total hand values. (Korean J Human Ecology 1(2):119∼128, 1998)

• Journal of Korean Physical Therapy Science
• /
• v.6 no.1
• /
• pp.905-913
• /
• 1999

The hand is a part of the body which has various functions and a sophisticated structures bone, Joint, tendon, ligament and logical nerve organ are aggregated densely in the hand of anatomy its functions are delicate. The hand's functions are very important for doing ADL and a worker's As the hand is structure which is used often and commonly it is a site that can be easily damaged by a accident on work. This study was investigated and analyzed by the results from 238 workers who had hand injury and physical therapy from January, 1997 to June, 1998 at Shin-Pung, Jang-Lim industrial complex which is located in Pusan. 1. A hand injury most frequertly happened in worker in their 30's and 20's(66 case, 28%), second was 57 case(24%) their 40's. 2. Among workers suffering from injury, who had one or less than 2 years on the job, a injury most frequently occurred. 3. Scale of workers, A injury most frequently happend in a place where had workers from 10 to 50. 99 workers from that place were 42% of total. 4. Month of occurrence rate in March were the highest compared to other months 40 injury workers in march were 17% of the total. Second was July, and the least was April that injury appeared with 10 workers. (4.2% of the total) 1. Frocture was the most common lesion 82 workers had that lesion(34%) soft tissue rupture was 71 workers who were 30% of total in type of lesion. 2. Of the site of lesion multiple case was the most common in which 57 workers had that lesion it were 24% of the total. The next was the index finger site in which 44 workers were 19% of the total. The index finger was the most common mono-site that can be lesion 36 workers were the middle finger lesion workers who were 15% of the total. Of the joint lesion, PIP was the most in which 76 workers were 44% and in MC 27 workers were 15% of the total. 3. Interval of physical therapy 79 workers from one month to 2 months, was 33% of the total and 174 workers who had therapy below 3 months were 71% 4. Post injury of disablity of the site, phalangeous disability was the most in which 148 workers had that injury and they were 62% of the total of the grade of disability 110 workers who were 46% of the total state from less than 25% disability in hand-function and 59 patients who were 25% had no disability. There were 6 workers (3% of the total) who had over -75%-dibability in the hand-function.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.146-149
• /
• 2005

Thesedays, the reduction of hand-transmitted vibration of hand-held power tools is important issue for operators' welfare, In the study, frequency response function is measured and vibration total value is evaluated for solving the principle and effect of the BOSCH's vibration-proof handle. This handle functions as a dynamic damper and has the effect, 22% vibration total value reduction under idling condition using a system that consists of a PC with data acquisition system and LabVIEW program. The program in the system makes it possible to evaluate vibration total value according to ISO 5349. This handle offers a good example for figuring out the physical contradiction between the work efficiency and operators' health.

• Archives of Reconstructive Microsurgery
• /
• v.20 no.1
• /
• pp.74-77
• /
• 2011

Total scalp avulsion is rare but a devastating injury. This condition burdens the patient with disfigured cosmetic appearance and permanent psychosocial trauma. Throughout history, this condition has been favored in women working with mechanics since the long hair function as a vector appliance for oblique pull of the hair into a stationary torque. We present our experience of the replantation of the total avulsed scalp in male, first to be reported in Korea. Warm ischemic time was exceeding 16 hours along with severe crushed condition of the detached margin, a relatively satisfactory result was obtained.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.3
• /
• pp.17-25
• /
• 2006

We performed the objective sensibility evaluation on knitted fabrics by the following procedures: setting acrylic fabrics with knitted fabrics as basis, knitted five kinds of blended spun yarns and four kinds of twisted filament yams made by different twisting methods(the amount and direction of twist) then, measuring mechanical properties in the use Kawabata Evaluation System, obtaining hand values and total hand values. The results are as follows: First, A(F)/W acrylic/wool spun knits obtain high scores in bending, compressing, shear properties, MMD, and thickness among five kinds of acrylic-blended knit fabrics. A(S)/W acrylic/wool blended knit represented prominent values at compressing properties and thickness and so wool-blended yams demonstrated superior characters comparing other blended yarns. To contrast, acrylic/rayon blended knits showed low scores in bending properties, shear properties and thickness, so that it affects to total hand values. On the one hand, among the four kinds of acrylic filament knitted fabrics, they do not exhibit any notable dynamic differences such as tensile properties of knitted fabrics by the twist number and direction of filament yarns, bending, shear, compressing properties, weight and thickness except surface properties. Second, fabrics showed the most high score at FUKURAMI (fullness and softness) among the hand values. A(S)/W acrylic/wool blended knits obtaining the lowest values at SAHRI (crispness) outrank at total hand values, so that it was the predominant knitted fabric in objective sensibility evaluation. In total hand values, five kinds of acrylic blended knits got a higher score than four kinds of acrylic filament knits, and the amount and direction of twist did not influence on total hand values among the four kinds of acrylic filaments.