• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.485-488
• /
• 2006

In order to investigate the possibility of waste mushroom logs as biomass resource chemical and physical characteristics of normal woods and waste mushroom logs such as crystallinity value, energy consumption, total sugar yield after hydrolysis chemical compounds and molecular weight distribution after acid hydrolysis, were examined. In the results, crystallinity of waste mushroom logs which were three year passed after the inoculation was decreased drastically from 49% to 33% during the cultivation. Lignin contents as chemical compounds of normal woods and waste mushroom logs were 21.07% and 18.78%, respectively. By the results of measurement of energy consumption, the size reduction of normal woods required a significantly higher energy than that of waste mushroom logs. In the hydrolysis, total sugar yield by enzyme and acid hydrolysis were high in waste mushroom logs(53% 57.5%) than in normal woods(42.9%, 47.17%). According to the molecular weight distribution using GPC, low molecular weight compounds were distributed in waste mushroom logs. Based on these results, waste mushroom logs have enough potential as material for developing alternative energy because of easily conversion to sugar by various hydrolysis methods and requirement of low energy consumption during size reduction.

• Journal of Energy Engineering
• /
• v.28 no.4
• /
• pp.8-12
• /
• 2019

Thermal amine scrubbing is the most advanced CO₂ capture technique but its largescale application is hindered due to the large heat requirement during solvent regeneration step. The addition of a solid metal oxide catalysts can optimize the CO₂ desorption rate and thus minimize the energy consumption. Herein, we evaluate the solvent regeneration performance of Monoethanolamine (MEA) and Diethanolamine (DEA) solvents without and with two metal oxide catalysts (TiO₂ and V₂O₅) within a temperature range of 40-86℃. The solvent regeneration performance was evaluated in terms of CO₂ desorption rate and overall amount of CO₂ desorbed during the experiments. Both catalysts improved the solvent regeneration performance by desorbing greater amounts of CO₂ with higher CO₂ desorption rates at low temperature. Improvements of 86% and 50% in the CO₂ desorption rate were made by the catalysts for MEA and DEA solvents, respectively. The total amount of the desorbed CO₂ also improved by 17% and 13% from MEA and DEA solvents, respectively. The metal oxide catalyst-aided regeneration of amine solutions can be a new approach to minimize the heat requirement during solvent regeneration and thus can remove a primary shortfall of this technology.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.21-24
• /
• 2008

In this paper, we introduce the status of concentration photovoltaic system. Currently, crystalline silicon solar has 90% of total solar market. But in a few years, the concentration solar system is expected to be main one because cost increasement of silicon material is not stabilized unit now. At 2012, it will take 5% of the whole solar market. Less expensive, material requirement and high system efficiency give high driving force for intensive research on concentration system. It is time for us to initiate the basic study and evaluate the long term stability compared to crystalline silicon system. The detail discussion will be shown in the following paper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9A
• /
• pp.796-800
• /
• 2011

An energy-efficient multi-hop scheme based on cooperative MIMO (multiple-input multiple-output) technique is proposed for wireless sensor networks, taking into consideration the modulation constellation size, transmission distance, and extra training overhead requirement. The scheme saves energy by selecting the hop length. In order to evaluate the performance of the proposed scheme, a detailed analysis of the energy and delay efficiencies in the proposed scheme compared with the equidistance scheme is presented. Results from numerical experiments indicate that by use of the proposed scheme significant savings in terms of total energy cousumption can be achieved.

• Nuclear Engineering and Technology
• /
• v.3 no.1
• /
• pp.21-31
• /
• 1971

The part of the work of plastic deformation of metal goes into the changes in the total surface free energy. This contribution is dependent on the specific surface free energy, which is affected by the environment. Based on thermodynamical approach, volume constancy requirement and adsorption induced two distinct dislocation interaction mechanisms for strengthening or weakening of metals at surface, theoretical derivation has been made to show that the environmental contribution on the strain hardening, the stress and the energy required for plastic deformation can be expressed in terms of solid surface tension in vacuum (${\gamma}$$_{s}$), interfacial tension (${\gamma}$$_{se}$ ), surface dislocation density ($\rho$$_{s}$), internal dislocation density ($\rho$$_{i}$) and fraction of surface site uncoverage (f). On the basis of theoretical derivation, the various mechanical behaviours under different environments are predicted.d.d.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.1
• /
• pp.107-111
• /
• 1996

Studies on the effects of protein levels on the total sulphur amino acid (TSAA) requirements of chickens were conducted on the starter broilers by feeding four levels of crude protein(16, 18, 20 and 23%) at three levels of TSAA (0.83, 0.93 and 1.03%) and on the grower broilers by feeding three levels of crude protein (16, 18 and 20%) at three levels of TSAA(0.72, 0.79 and 0.86%). The metabolisable energy of the diets was maintained constant at 3,200 kcal/kg and the experiments were carried out for two growing periods: starter (0-3 wk) and grower (3-6 wk). The results showed that there were significant differences in body weight gain, feed intake and feed:gain ratio under different protein levels of the starters. Crude protein, ME and TSAA intake were significantly affected by increasing the CP levels. The TSAA requirement of the starter broilers is recommended at 0.93% and it is not influenced by different protein levels used in the experiment. For the grower period, body weight gain and feed:gain ratio improved significantly at higher protein diets. Birds fed higher protein diet consumed greater quantities of protein. Responses to TSAA supplementation for body weight gain, feed intake and feed:gain ratio were not significant. The present results showed that the TSAA level of 0.79 to 0.86% was required for grower diets and that the protein levels of the diet did not influence the TSAA requirement.

• Journal of Animal Science and Technology
• /
• v.64 no.3
• /
• pp.471-480
• /
• 2022

This experiment was conducted to determine the maximum dietary energy levels on growth performance and carcass characteristics of White Pekin duck. the Six dietary treatments were formulated based on their apparent metabolizable energy (AME) concentrations from 2,700 to 3,200 kcal/kg with a 100 kcal/kg gap to evaluate the accurate dietary AME requirement to address current knowledge and further issues for fulfilling the genetic potential of meat-type white Pekin ducklings. A total of 432 one-day-old male White Pekin ducklings were randomly allocated into one of six dietary treatments with six replicates (12 birds per pen). The diets were formulated as corn-soybean meal-based diets to meet or exceed the Nutrient Requirement of Poultry specification for meat-type ducks. Growth performance indices (i.e. average daily gain [ADG], average daily feed intake, feed conversion ratio) were measured weekly. Medium body weight (BW) ducklings from each pen were sacrificed to analyze the carcass traits and abdominal fat content on day 21. Obtained data were analyzed to estimate significant effect using the one-way ANOVA of IBM SPSS Statistics (Version, 25). If the p-value of the results were significant, differences in means among treatments were separated by Tukey's post hoc test. Significant differences were then analyzed with a linear and quadratic broken model to estimate the accurate concentration of AME. Ducklings fed higher dietary AME diets increased (p < 0.05) BW, ADG. Ducklings fed higher AME than 2,900 kcal/kg diets increased abdominal fat accumulation and leg meat portion. The estimated requirement by linear plateau method showed from 3,000.00 kcal/kg to 3,173.03 kcal/kg whereas the requirement by quadratic plateau method indicated from 3,100.00 kcal/kg to 3,306.26 kcal/kg. Collectively, estimated dietary requirements exhibit diverse results based on the measured traits and analysis methods. All the estimated requirements in this experiment present higher than previous research, the maximum requirement for the next diet formulation should be selected by the purpose of the diet.

• Korean Journal of Community Nutrition
• /
• v.16 no.2
• /
• pp.195-205
• /
• 2011

This study was conducted to investigate the time spent, activity coefficient and energy expenditure on 7 different types of activity. Total of 386 5th and 6th grade primary school boys and girls in Seoul participated in this study. The participants spent 8 hrs for rest, 4 hrs for out of school study, 3 hrs for leisure, 1 hr 45 mins. for hygiene, 1 hr for commute, and 15 mins. for house choir activity in the day of 6 class hours. The average activity coefficient of 1 day for boys and girls were 1.69 and 1.64, respectively. The TEEs were 2,382 kcal and 2,050 kcal for boys and girls, respectively. The energy cost for study related activity (in school and study activities) was 40% of the TEE, and for rest 20%, for commute 9%, and for hygiene 10% of the TEE. The energy cost for house choir was only about 2% of TEE. The 91.2% participant's EER was higher than the EER shown in the table of 2010 DRI for Koreans. When the participant's EER was compared with the energy allowance calculated by the method in 2000 RDA for Korean, 81.6% was in the range of ${\pm}5%$, and the correlation coefficients between the 2 values were 0.981 for boys and 0.978 for girls, which means high agreements.

• Korean Journal of Community Nutrition
• /
• v.16 no.3
• /
• pp.307-314
• /
• 2011

The purpose of this study is finding the easy way of 4 categories activity level confirmation for estimated energy requirement calculation. Total of 386, 5th and 6th grade primary school students participated. The time spent on 7 kinds of activity were collected for 1 day by the internet program developed. Judged by the activity coefficient, sedentary were 6.7% and 5.1%, low active 33.2% and 40.4%, active 43.8%, and45.5%, and very active 16.3% and 9.0% for boy and girl, respectively. The highest and significant correlation coefficient between activity coefficient and time spent on activities shown were 0.339 in commute activity for boys, and 0.466 in leisure for girls. The sensitivity of the sedentary conformation by commute hour for boys was 0.79, and that of very active was 0.56. The sensitivity of the sedentary conformation by leisure hour for girls was 0.67, and that of very active was 0.63. The sensitivity of low active and active by 7 different types of activity was quite low, 0.04~0.37. The exact agreement of activity level conformed by easy way developed was 30.8% and 33.7%, for boys and girls, respectively. More accurate way to identify 4 categories activity level needs to be developed, especially sensitive to conformation of low active and active levels.

• Journal of Biosystems Engineering
• /
• v.4 no.2
• /
• pp.46-52
• /
• 1979

The water delivery hose for agricultural pump is getting popular in rural areas in korea. Friction head loss, discharge, and power requirements were measured in various discharge for different material and diameter of hose to get basic data for economical use in agricultural pump. The results attained in this study were as follows ; 1. Friction head loss increased significantly as the velocity increased, and the difference of velocity between the different diameter of hose was bigger than that between materials, which was resulted in the increase of the friction head loss. 2. Friction head loss in the case of that the velocity with 2m/sec was constant was about 3.53 to 4.01 m/100m in the diameter 3" and about 2.30 to 3.10 m/100m in the diameter 4". Material A of diameter 3" showed the maximum value 8.4m/100m in Reynolds number $2.0\times10^5$, 4" got the minimum value 2.24m/100m, the difference between these values was bigger than 6m per 100 meters in the friction head loss. 3. Darcy-Weisbach formular with friction coefficient [f] calculated by Nikurades formular in the smooth pipe or with friction coefficient [f] calculated on the base of C value 125 in Hazen-Williams formular was available in friction head loss of the water discharger hose in rural areas. 4. Total head increased as friction head loss increased , meanwhile total discharge decreased, and 20 percents of energy was more saved in Material C 4″pipe than Material A 3″pipe in the view point from the discharge per unit power requirement, this phenomenon suggested that long distance pipe would be advantage in larger diameter pipe for save of energy. for save of energy.