• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.131-134
• /
• 2005

본 논문에서는 이동에이전트 기반으로 구축된 P-그리드 환경에서, 그리드 서비스 에이전트가 각 피어에게 효율적으로 이주할 수 있는 방법에 대하여 연구한다. 서비스 요청에 따른, 서비스 에이전트를 전달하기 위한 이주방법은 피어의 논리적인 네트워크 위상에 기반한다. 본 시스템에서 사용되는 네트워크 위상은 스타형 위상, 링형 위상, 트리형 위상으로 구성되어, 마스터/슬레이브 방식과 직렬 및 병렬 전송방식으로 에이전트를 이주시킨다. 요청된 서비스의 수행범위 및 특성에 따라 서비스 에이전트의 이주방식을 선택한다. 또한 네트워크 위상을 구성하는 피어의 성능과 에이전트 이주 순서에 의해 서비스 전체 수행시간이 영향을 받는다. 따라서 피어의 성능을 모니터링하고, 히스토리를 분석 및 학습하여 에이전트의 이주 우선순위를 결정한다. 서비스 에이전트의 이주방식의 결정과 이주하려는 피어의 우선순위 결정을 통하여 효율적으로 서비스 수행시간을 절감할 수 있다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.485-486
• /
• 2016

This paper proposes a new hybrid five-level voltage-source inverter topology, based on the conventional five-level active neutral-point-clamped topology (5L-ANPC), where the lower number of switching devices is required, resulting in saving the cost. The operating principle and control method of the proposed topology is described. The comparison of THD, power losses, loss distribution, and cost of components are evaluated among the proposed topology, the 5L-ANPC and 5L-DCI (diode-clamped inverters) topology.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.120-123
• /
• 2005

A dynamic system identification technique based on the topology optimization method is developed. The specific problem in consideration is the damage location identification of a plate structure using the Frequency Response Function (FRF) of a damaged structure. In this work, the identification problem is formulated as a topology optimization problem. The importance of using anti-resonance information in addition to using resonance information is addressed. Though a simple problem was considered here, the possibility of using the topology optimization for damage identification is investigated lot the first time.

• Architectural research
• /
• 제12권1호
• /
• pp.39-47
• /
• 2010

This paper describes a topology optimization technique which can maximize the fundamental frequency of the structures. The fundamental frequency maximization is achieved by means of the minimization of modal strain energy as an inverse problem so that the strain energy based resizing algorithm is directly used in this study. The strain energy to be minimized is therefore employed as the objective function and the initial volume of structures is used as the constraint function. Multi-frequency problem is considered by the introduction of the weight which is used to combine several target modal strain energy terms into one scalar objective function. Several numerical examples are presented to investigate the performance of the proposed topology optimization technique. From numerical tests, it is found to be that the proposed optimization technique is extremely effective to maximize the fundamental frequency of structure and can successfully consider the multi-frequency problems in the topology optimization process.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.523-528
• /
• 2002

Topology optimization is widely accepted as a conceptual design tool for the product design. Since the resulted layout of the topology optimization is a kind of digital images represented by the density distribution, the seamless process is required to transform digital images to the CAD model for the practical use. In this paper, the general process to construct a CAD model is developed to apply for topology images based on elements. The node density and the morphology technique is adopted to extract boundary contour of the shape and remove the noise of images through erosion and dilation operation. The proposed method automatically generates point data sets of the geometric model. The process is integrated with Pro/Engineer, so that the engineer in practice can directly handle with curves or surface form digital images.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1085-1089
• /
• 2007

An acoustic topology optimization method is developed to optimize the acoustic attenuation capability of a muffler. The transmission loss of the muffler is calculated by using the three-point method based on finite element analysis. Each element of the finite element model is assumed to have the variable acoustic properties, which are penalized by a carefully-selected interpolation function to yield clear expansion chamber shapes at the end of topology optimization. The objective of the acoustic topology optimization problem formulated in this work is to maximize the transmission loss at a target frequency. The transmission loss value at a deep frequency of a nominal muffler configuration can be dramatically increased by the proposed optimization method. Optimal muffler configurations are also obtained for other frequencies.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.448-450
• /
• 2005

A ubiquitous network allows all users to access and exchange information of any kind freely at any time, from anywhere, and from any appliance through the use of broadband and mobile access. Bluetooth commincation can provide the missing wireless extension to the heterogeneous network, allowing a more ubiquitous access. In this point of view, the BT specifications define ways for which each BT device can set up multiple connections with neighboring devices to communicate in a multi-hop fashion. this paper provides insights on the Bluetooth technology and on some limitations of the scatternet formations. so that, we describe a new multi-hop routing protocol for the establishment of scatternets. this protocol defines rules for forming a multi-hop topology in two phases. the first phase, topology discovery, concerns the discovery of the node's depth from a root node initiating inquiry process. the second phase forms scatternet topology based on the result of topology discovery.

• 대한기계학회논문집A
• /
• 제33권8호
• /
• pp.779-785
• /
• 2009

This paper is concerned with a computational approach for topology optimization of geometrically nonlinear structures following specific load-displacement trajectories. In our previous works, attention was paid to stabilize topology optimization involving large displacement and a method called the element connectivity parameterization was developed. Here, we aimed to extend the element connectivity parameterization method to find an optimal geometrically nonlinear structure yielding a specific load-displacement trajectory. In contrast to designing a stiffest structure, the trajectory design problem requires special consideration in topology optimization formulation and solution procedure. Some numerical problems were considered to test the developed element connectivity parameterization based formulation.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제10권3호
• /
• pp.230-241
• /
• 2010

In the present paper we introduce and study fundamental concepts in the framework of L-fuzzifying topology(so called(2,L)-fuzzy topology)as L-concepts where L is a complete residuated lattice. The concepts of (2,L)-derived, (2,L)-closure, (2,L)-interior, (2,L)-exterior and (2,L)-boundary operators are studied and some results on above concepts are obtained. Also, the concepts of an L-convergence of nets and an L-convergence of filters are introduced and some important results are obtained. Furthermore, we introduce and study bases and subbases in (2,L)-topology. As applications of our work the corresponding results(see[10-11]) are generalized and new consequences are obtained.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권9호
• /
• pp.3572-3593
• /
• 2015

This article investigates the topology control problem in the space information network (SIN) using a hierarchical autonomous system (AS) approach. We propose an AS network topology control (AS-TC) algorithm to minimize the time delay in the SIN. Compared with most existing approaches for SIN where either the purely centralized or the purely distributed control method is adopted, the proposed algorithm is a hybrid control method. In order to reduce the cost of control, the control message exchange is constrained among neighboring sub-AS networks. We prove that the proposed algorithm achieve logical k-connectivity on the condition that the original physical topology is k-connectivity. Simulation results validate the theoretic analysis and effectiveness of the AS-TC algorithm.