• Geophysics and Geophysical Exploration
• /
• v.5 no.1
• /
• pp.6-17
• /
• 2002

Refraction tomography was developed to interpret subsurface velocity structure easily in topographic conditions. It was applied to synthetic refraction data to find the factors for optimization of applicability of refraction tomography such as configuration of profiling and its length, spacing of geophones and sources and topographic conditions. Also, low velocity layer near VSP hole could be detected by joint inversion with refraction and VSP data. Continuity of subsurface velocity structure in two different spread lines for area of house land development was good in case of applying our algorithm and velocity structure was classified quantitatively to evaluate rippability for engineering works.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.212-212
• /
• 2015

So far, geomorphologic dispersion due to the heterogeneity characteristics of flow paths in a basin has been demonstrated as a major factor affecting to the hydrologic response function of a catchment. This effect has considered by many previous studies taking into account flow path length factors, especially in the application of width function. Based upon the analysis of topographic index, another important geomorphologic factor extracted from DEM data, this work presents a new factor named saturation to evaluate its effects to the formation of the well-known instantaneous unit hydrograph (IUH) in Nash model and drainage structure in a river basin. First, the geomorphologic parameters corresponding to different saturation conditions are computed from DEM data with the support of GIS software. Then, in the combination of hydrologic and geomorphologic data, effective rainfall in each saturation degree and the Nash parameters are calculated using excel. Finally, the verification process with direct runoff data is conducted using Fortran programming. This process is applied to five sub-watersheds in Bocheong catchment ($485.21km^2$) in Korea where the necessary data are available and believable. The results from this approach will improve researchers and students'understandings about the relationship between rainfall and runoff and its relation with drainage structure within a catchment.

• The Journal of Engineering Geology
• /
• v.30 no.3
• /
• pp.315-325
• /
• 2020

This study was performed to develop a model to predict landslides and determine the variable importance of landslides susceptibility factors based on the probabilistic prediction of landslides occurring on slopes along the road. Field survey data of 30,615 slopes from 2007 to 2020 in Korea were analyzed to develop a landslide prediction model. Of the total 131 variable factors, 17 topographic factors and 114 geological factors (including 89 bedrocks) were used to predict landslides. Automated machine learning (AutoML) was used to classify landslides and non-landslides. The verification results revealed that the best model, an extremely randomized tree (XRT) with excellent predictive performance, yielded 83.977% of prediction rates on test data. As a result of the analysis to determine the variable importance of the landslide susceptibility factors, it was composed of 10 topographic factors and 9 geological factors, which was presented as a percentage for each factor. This model was evaluated probabilistically and quantitatively for the likelihood of landslide occurrence by deriving the ranking of variable importance using only on-site survey data. It is considered that this model can provide a reliable basis for slope safety assessment through field surveys to decision-makers in the future.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.115-131
• /
• 2008

The aim of this study is to analyze relationships between topography/geology which affects physically groundwater regime and groundwater yield properties in Pohang City using Geographic Information System (GIS). For the purpose, topographic factors such as ground elevation, ground elevation difference, ground slope, and ground regional slope, and hydrogeologic unit, and groundwater yield properties factors such as transmissivity, specific capacity, and well yield, were constructed to spatial data base. Then the relationships between topography, geology and groundwater yield properties were analyzed quantitatively using GIS overlay technique. As the results, ground-water yield of unconsolidated sediments and porous volcanic rocks is the highest among the hydrogeologic units of study area, and clastic sedimentary rock is the lowest. There are positive relationship between the elevation and elevation difference and the groundwater yield properties and negative relationship between the topographic slope and the groundwater yield properties.

• Journal of Korea Water Resources Association
• /
• v.33 no.4
• /
• pp.393-405
• /
• 2000

Monthly runoff was estimated using TOPMODEL which simulates ground water movement as well as surface runoff in the area of catchment. SAYUN dam which is being operated by Korea Water Resources Corporation was selected for the study, and the topographic factors of the watershed were analyzed using 1/5,000 digital map and GIS software(Arc/Info). The comparison shows good agreement between observed monthly runoff and the computation results simulated by using TOPMODEL. The catchment area of SAYUN dam was modeled by using various grid sizes in order to check the sensitivity of grid size, and the grid size of 180m was found most proper among 6 different sizes. TOPMODEL was also found superior to the existing monthly runoff models such as Kajiyama, KRIHS and Tank. Because the model requires limited number of parameters and considers topographic aspects, it is reckoned to be very useful for practical use.

• The Journal of the Korea Contents Association
• /
• v.12 no.11
• /
• pp.482-491
• /
• 2012

Because the satellite imagery can detect the radiative heat from the surface using the thermal IR (TIR) channel, there have been many efforts to verify the relationship between the land surface temperature (LST) and urban heat island. However, the relationship between geomorphological characteristics like surface aspects and LST is relatively less studied. Therefore, the geomorphological elements, for example, surface aspects and surface slopes, are considered to evaluate their effects on the change of the surface temperature distribution using the Landsat 7 ETM+ TIR channel and the possibility of the image to detect anthropogenic heat from the surface. We found that the surface aspect is ignorable but the surface slope with the sun elevation influences on the surface temperature distribution. Also, the radiative heat from the surface to the atmosphere could not be accurately recorded by the satellite image due to the surface slope but the slope correction process used in this study could correct the surface temperature under slope condition and the slope correction, in fact, was not influenced on the average temperature of the surface. The possibility of the anthropogenic heat detection from the surface from the satellite imagery was verified as well.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.499-506
• /
• 2002

The purpose of this study is to develop landslide susceptibility analysis techniques using artificial neural networks and to apply the newly developed techniques for assessment of landslide susceptibility to the study area of Yongin in Korea. Landslide locations were identified in the study area from interpretation of aerial Photographs and field survey data, and a spatial database of the topography, soil type and timber cover were constructed. The landslide-related factors such as topographic slope, topographic curvature, soil texture, soil drainage, soil effective thickness, timber age, and timber diameter were extracted from the spatial database. Using those factors, landslide susceptibility and weights of each factor were analyzed by two artificial neural network methods. In the first method, the landslide susceptibility index was calculated by the back propagation method, which is a type of artificial neural network method. Then, the susceptibility map was made with a GIS program. The results of the landslide susceptibility analysis were verified using landslide location data. The verification results show satisfactory agreement between the susceptibility index and existing landslide location data. In the second method, weights of each factor were determinated. The weights, relative importance of each factor, were calculated using importance-free characteristics method of artificial neural networks.

• The Journal of Engineering Geology
• /
• v.15 no.2 s.42
• /
• pp.185-199
• /
• 2005

Properties of sliding materials are dependent on the lithology because debris is the product of rock weathering processes. In order to characterize transportation behavior of debris dependent of debris types, this study selected 26 debris flows over three areas composed with different rock weathering types and topographic conditions. Analyses of lithology, weathering, and topographic characteristics were performed by detailed field survey. Based on the field survey data, transportation behavior of debris was studied at the aspect of the relationship of grain size and volume of debris as well as topographic conditions. According to the study results, change of slope angle is very influential factor on runout distance of debris among the topographic factors. Because the sliding velocity and the energy of debris are frequently changed and more irregular on an undulating slope, the unout distance of debris is larger than that of an uniformly dipping slope. Runout distance of debris is also influenced by volume and grain size of debris. Volume of debris in the gabbro is four or five times larger than that of the granite area because it is controlled by the lithology. Considered with grain size distribution, runout distance of debris is longer in the gabbro area which is composed with irregular grain size bearing large corestones than that in the medium grained granite area.

• Geophysics and Geophysical Exploration
• /
• v.27 no.1
• /
• pp.37-50
• /
• 2024

The magnetotelluric (MT) survey can be affected by external environmental factors. In particular, when acquiring MT data in islands, it is essential to consider the combined effect of topography and sea to understand the results and make accurate interpretations. To analyze the MT response (apparent resistivity, phase) with consideration of the effect of topography and sea, a small cone-shaped island model surrounded by deep sea was created. Two-dimensional (2-D) and three-dimensional (3-D) forward modeling were performed on the terrain model considering topography and the island model considering both topography and sea. The 2-D MT response did not reflect the topographic and sea effect of the direction orthogonal to the 2-D profile. The 3-D MT response included topographic and sea effects in all directions. The XY and YX components of the apparent resistivity were separated on undulating topography, such as a hill. A conductor at 1 km below sea level could be distinguished from topographic and sea effects in the MT response, and low resistivity anomaly was attenuated at greater depths. This study will facilitate understanding of field data measured on small islands.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.185-190
• /
• 2005

In this study, a probabilistic prediction model for debris flow occurrence was developed using a logistic regression analysis. The model can be applicable to metamorphic rocks and granite area. In order to develop the prediction model, detailed field survey and laboratory soil tests were conducted both in the northern and the southern Gyeonggi province and in Sangju, Gyeongbuk province, Korea. The six landslide triggering factors were selected by a logistic regression analysis as well as several basic statistical analyses. The six factors consist of two topographic factors and four geological and geotechnical factors. The model assigns a weight value to each selected factor. The verification results reveal that the model has 86.5% of prediction accuracy. Therefore, it is possible to predict landslide occurrence in a probabilistic and quantitative manner.