• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.2
• /
• pp.1-9
• /
• 2008

The objective of the study is 10 know the relation of landslide occurrence with using TPI (Topographic Position Index) in the Pyungchang County. Total 659 landslide scars were detected from aerial photographs. To analyze TPI, 100m SN (Small-Neighborhood) TPI map, 500m LN (Large-Neighborhood) TPI map, and slope map were generated from the DEM (Digital Elevation Model) data which are made from 1 : 5,000 digital topographic map. 10 classes clustered by regular condition after overlapping each TPI maps and slope map. Through this process, we could make landform classification map. Because it is only to classify landform, 7 classes were finally regrouped by the slope angle information of landslide occurrence detected from aerial photography analysis. The accuracy of reclassified map is about 46%.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.3
• /
• pp.217-223
• /
• 2014

With precise sensor position, attitude element, and imaging resolution, a simulated geospatial image can be generated. In this study, a satellite image is simulated using SPOT ortho-image and global elevation data, and the geometric similarity between original and simulated images is analyzed. Using a SPOT panchromatic image and high-density elevation data from a 1/5K digital topographic map data an ortho-image with 10-meter resolution was produced. The simulated image was then generated by exterior orientation parameters and global elevation data (SRTM1, GDEM2). Experimental results showed that (1) the agreement of the image simulation between pixel location from the SRTM1/GDEM2 and high-resolution elevation data is above 99% within one pixel; (2) SRTM1 is closer than GDEM2 to high-resolution elevation data; (3) the location of error occurrence is caused by the elevation difference of topographical objects between high-density elevation data generated from the Digital Terrain Model (DTM) and Digital Surface Model (DSM)-based global elevation data. Error occurrences were typically found at river boundaries, in urban areas, and in forests. In conclusion, this study showed that global elevation data are of practical use in generating simulated images with 10-meter resolution.

• Journal of the Korean Geographical Society
• /
• v.43 no.6
• /
• pp.1002-1015
• /
• 2008

We investigate the potential of digital elevation model and multivariate geostatistical kriging in mapping of temperature and rainfall based on sparse weather station observations. By using elevation data which have reasonable correlation with temperature and rainfall, and are exhaustively sampled in the study area, we try to generate spatial distributions of temperature and rainfall which well reflect topographic effects and have less smoothing effects. To illustrate the applicability of this approach, we carried out a case study of Jeju island using observation data acquired in January, April, August, and October, 2005. From the case study results, accounting for elevation via colocated cokriging could reflect detailed topographic characteristics in the study area with less smoothing effects. Colocated cokriging also showed much improved prediction capability, compared to that of traditional univariate ordinary kriging. According to the increase of the magnitude of correlation between temperature or rainfall and elevation, much improved prediction capability could be obtained. The decrease of relative nugget effects also resulted in the improvement of prediction capability.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.101-108
• /
• 2011

Construction of the Jangbogo antarctic station was planned, and it requires detailed information on topography of the area around the station. The purpose of this research is to generate the topographic map to construct the Jangbogo antarctic station using the satellite image. To do this, surveying and pre-test of equipment were conducted. In addition, for sensor modeling of the GeoEye-1 satellite image, RPC-bias correction was done, and it showed that at least two control points are required. In generating the map, a 1/2,500 scale was deemed suitable in consideration of resolution of the image and the fact that supplementary topographic surveying would be impossible. In order to provide detailed information on the topography around the Jangbogo station, the digital elevation model based on image matching was created, and compared with GPS-RTK data, accuracy of vertical location about 0.6m was exhibited.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.3
• /
• pp.19-32
• /
• 2002

Topographic information is indispensable in the applications that require elevational data. These applications are exemplified by watershed partition, extraction of drainage networks, viewshed analysis, derivation of geomorphologic features, quantification of landslide-terrain, and identification of topographic settings susceptible to landsliding. Therefore, we study the accuracy of data on topographic parameters derived from digital elevation models(DEMs). This research wished to analyze the effect that data source and grid size get in topography parameter using gridded DEM. An analysis of topography parameter extract and compared drainage basin, watershed slope, stream network using DEM is constructed by digital map and DTED DEM. Especially, when extract stream network from gridded DEM, received much effects according to threshold value of flowaccumulation regardless of DEM grid size. Therefore, this study applied equal threshold value of flowaccumulation for two data sources, and compare and analyzed stream network.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.84-95
• /
• 2005

This paper presents solution heuristics to solving optimal multiple-viewpoint location problems that are based on topographic features. The visibility problem is to maximise the viewshed area for a set of viewpoints on digital elevation models (DEM). For this analysis, five areas are selected, and fundamental topographic features (peak, pass, and pit) are extracted from the DEMs of the study areas. To solve the visibility problem, at first, solution approaches based on the characteristics of the topographic features are explored, and then, a benchmark test is undertaken that solution performances of the solution methods, such as computing times, and visible area sizes, are compared with the performances of traditional spatial heuristics. The feasibility of the solution methods, then, are discussed with the benchmark test results. From the analysis, this paper can conclude that fundamental topographic features based solution methods suggest a new sight of visibility analysis approach which did not discuss in traditional algorithmic approaches. Finally, further research avenues are suggested such as exploring more sophisticated selection process of topographic features related to visibility analysis, exploiting systematic methods to extract topographic features, and robust spatial analytical techniques and optimization techniques that enable to use the topographic features effectively.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.147-150
• /
• 2004

Firstly, the precipitation data have to be interpolated for the estimation of water resources. For this purpose, the correlative analysis is made between the topographic variables, which, influence the precipitation phenomena, are classified by elevation(ELEV), slope(SLOPE), distance to the sea(SEA), obstacle (OBST), barrier(BAR), and roughness index(SHIELD), using TOVA(Topographic Variables Extraction Program) and events precipitation during the periods from january the 1st 2000 to December 31 2002. The coefficients of determination show that each event has different topographic influence and ELEV, SLOPE and OBST to the South-West, and SHIELD of every direction have close relationship with the precipitation. The multiple regression model explains 96% of the spatial variation of precipitation.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.3
• /
• pp.56-61
• /
• 2004

The topographic variables, which influence the precipitation phenomena, are classified by elevation (ELEV), slope (SLOPE), distance to sea (SEA), obstruction (OBST), barrier (BAR), roughness (SHIELD), extracted and analysed according to resolutions. This study is performed through 100 m, 200 m, 400 m, 600 m, 800 m and 1,000 m based on 50 m DTM using TOVA (Topographic Variables Extraction Program). The result of a case study on Jeju weather station says that the variance according to resolution is generally less than that according to cardinal direction, but particularly SHIELD values and some cases for 600m resolution have a significant results.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.271-280
• /
• 1999

The topographical effect resulted from rugged terrains and inhomogeneous spectral characteristics due to the complexly mixed land cover condition of Korea substantially lower the remotely sensed land cover classification accuracy In this study, a topographic correction method using digital elevation model to alleviate the topographic effects. To deal with inhomogeneous spectral characteristic, a hybrid classifier with inclusion of prior probabilities was introduced. This investigation concluded that the topographical normalization and hybrid classification with prior probabilities are effective on rugged landscape. The overall and average classification accuracies were improved by 0.92％ and 1.016％ respectively. The most substantial and noticeable accuracy improvement was observed in forest areas.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.115-131
• /
• 2008

The aim of this study is to analyze relationships between topography/geology which affects physically groundwater regime and groundwater yield properties in Pohang City using Geographic Information System (GIS). For the purpose, topographic factors such as ground elevation, ground elevation difference, ground slope, and ground regional slope, and hydrogeologic unit, and groundwater yield properties factors such as transmissivity, specific capacity, and well yield, were constructed to spatial data base. Then the relationships between topography, geology and groundwater yield properties were analyzed quantitatively using GIS overlay technique. As the results, ground-water yield of unconsolidated sediments and porous volcanic rocks is the highest among the hydrogeologic units of study area, and clastic sedimentary rock is the lowest. There are positive relationship between the elevation and elevation difference and the groundwater yield properties and negative relationship between the topographic slope and the groundwater yield properties.